{"title":"Cairnwell Tile Range","description":"\u003ch2\u003eThe Cairnwell range at a glance\u003c\/h2\u003e\r\n\u003cp\u003eCairnwell is a modern stone look porcelain with soft tonal variation and subtle veining, understated enough to suit a wide range of interiors but with enough character to hold its own. It comes in two colours, White and Taupe, and two sizes, 300 x 600mm and 600 x 600mm, 9mm thick with a rectified edge. It is one range with two finishes, made to carry one look from the entry through to the exterior.\u003c\/p\u003e\r\n\u003cp\u003eThose two finishes split the range. The indoor tiles are a smooth matte at P3, in both sizes and both colours. The outdoor tiles are a grip finish at P5, in 600 x 600mm only, in both colours. Both are rated to AS 4586-2013. The decision on this page is mostly a choice between the two, so each gets its own section below.\u003c\/p\u003e\r\n\u003cp\u003eRelated pages cover the wider groups. The \u003ca href=\"\/collections\/tiles\"\u003etiles\u003c\/a\u003e hub links every category on the site. \u003ca href=\"\/collections\/avedon-tile-collection\"\u003eAvedon\u003c\/a\u003e is the closest range in format and finish, and \u003ca href=\"\/collections\/myra-limestone-tiles\"\u003eMyra\u003c\/a\u003e and \u003ca href=\"\/collections\/ardenne-tile-collection\"\u003eArdenne\u003c\/a\u003e are the other stone and travertine looks nearby. For rooms and uses, \u003ca href=\"\/collections\/bathroom-tiles\"\u003ebathroom tiles\u003c\/a\u003e, \u003ca href=\"\/collections\/floor-tiles\"\u003efloor tiles\u003c\/a\u003e and \u003ca href=\"\/collections\/outdoor-tiles\"\u003eoutdoor tiles\u003c\/a\u003e hold the wider lists.\u003c\/p\u003e\r\n\r\n\u003ch2\u003ePorcelain that looks like stone\u003c\/h2\u003e\r\n\u003cp\u003eThe category is simple to explain. A look-alike porcelain is printed and fired to copy the veining and texture of stone. It is near impervious to water, stains and general wear, and a regular mop is enough to care for it. Take the look-alike if you want a similar appearance with easier maintenance, greater consistency and better resistance to moisture and everyday wear.\u003c\/p\u003e\r\n\u003cp\u003eCairnwell is on that side of the choice. Every tile is porcelain, easy to clean with standard household products, with no sealing required, and a non-porous surface. A general point applies to the outdoor tiles: porous materials such as natural stone, concrete and terrazzo need sealing, and porcelain rated for outdoor use is the most durable and lowest maintenance option. Cairnwell does not carry the sealing requirement that the real stone does.\u003c\/p\u003e\r\n\u003cp\u003eIf real stone is the aim, the \u003ca href=\"\/collections\/natural-stone-tiles\"\u003enatural stone tiles\u003c\/a\u003e page holds it. Cairnwell is the porcelain version of that look.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eWhite and Taupe\u003c\/h2\u003e\r\n\u003cp\u003eThe two colours are White and Taupe. White is the lighter base. Taupe sits among the warm neutrals, with greige and sand. Warm neutrals give warmth without a strong colour, pairing with timber, stone and softer greys. Undertones such as creamy, mushroom, honeyed and greige each change a room, so hold a sample against the fixed finishes: cabinetry, stone and paint.\u003c\/p\u003e\r\n\u003cp\u003eStone effect tiles pair with wood, wicker and rattan. In practice that suggests timber vanities, woven baskets and linen alongside either colour, with Taupe suiting rooms that lean warm and White suiting rooms that want a lighter base. The \u003ca href=\"\/collections\/white-tiles\"\u003ewhite tiles\u003c\/a\u003e page and the \u003ca href=\"\/collections\/beige-tiles\"\u003ebeige tiles\u003c\/a\u003e page show the colour families across every use, and \u003ca href=\"\/collections\/grey-tiles\"\u003egrey tiles\u003c\/a\u003e shows the cooler neighbours.\u003c\/p\u003e\r\n\u003cp\u003eGrey sits between warm and cool palettes, and Taupe does the same job here. The two colours carry through both finishes, so a decision on colour holds for the indoor and outdoor tile.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eIs a stone look right in a shower or wet room?\u003c\/h2\u003e\r\n\u003cp\u003ePeople searching for limestone tile often ask whether it works in a shower. Real limestone is porous, wants sealing on installation and again later, and is softer. A look-alike porcelain has a near impervious body, and matte and textured finishes cope with wet conditions better than polished ones, with slip rating mattering in bathrooms and outdoors.\u003c\/p\u003e\r\n\u003cp\u003eCairnwell's position is clear. The P3 matte tile is rated to AS 4586-2013 and recommended for indoor wet areas including bathrooms, kitchens and laundries. The P5 grip tile is suitable for outdoor areas, pool surrounds and high wet risk applications. The material is porcelain, 9mm thick, with no sealing required and a non-porous surface. As with any tile, a licensed tiler is the person to confirm a specific shower floor or recess.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eThe indoor tile: P3 matte\u003c\/h2\u003e\r\n\u003cp\u003eThe indoor tiles have a matte finish with a smooth and non-reflective surface. The slip line reads P3, moderate slip risk, rated to AS 4586-2013, and recommended for indoor wet areas including bathrooms, kitchens and laundries. The area line reads Indoors, wet and dry areas, and the application line reads Walls and Floors. The wear line reads 3, suitable for floors in light traffic areas with normal shoes, with a medium risk of scratching.\u003c\/p\u003e\r\n\u003cp\u003eThe wear line is the one to read for a floor. Light traffic fits a bathroom, a bedroom or a laundry. A busy entry or a kitchen floor sits better with a wear 4 tile, and in this range that is the P5 tile, if its grip surface suits the room. The 300 x 600mm tile also works as a wall tile, and both indoor sizes are printed for walls and floors. The \u003ca href=\"\/collections\/300mm-x-600mm-tiles\"\u003e300 x 600mm tiles\u003c\/a\u003e and \u003ca href=\"\/collections\/600mm-x-600mm-tiles\"\u003e600 x 600mm tiles\u003c\/a\u003e pages show each format across every range.\u003c\/p\u003e\r\n\u003cp\u003ePair the tiles with underfloor heating for a warmer, drier, mould-resistant bathroom, and order extra tiles over the exact quantity for breaks and offcuts. Colour, size and texture may vary from batch to batch, and the appearance line reads V3, moderate variation in colour and texture.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eThe outdoor tile: P5 grip\u003c\/h2\u003e\r\n\u003cp\u003eThe outdoor tiles have a grip finish with a textured grip surface. The slip line reads P5, very low slip risk, rated to AS 4586-2013, and suitable for outdoor areas, pool surrounds and high wet risk applications. The application line reads Walls, Floors and Outdoor Areas, and the area line reads Indoors and outdoors, including uncovered outdoor areas. The wear line reads 4, suitable for floors in normal use areas with low risk of scratching.\u003c\/p\u003e\r\n\u003cp\u003ePorcelain is usually preferred for alfresco and patio areas because it does not absorb moisture and handles temperature changes, with a slight texture for grip, especially in spots exposed to rain. For pool surrounds, traction and water resistance come first, and lighter colours are often chosen to reduce heat underfoot, which makes White the lighter choice in this range. Porcelain is the top outdoor choice for most homeowners because it is non-porous and weather resistant, and a textured or matte surface gives grip.\u003c\/p\u003e\r\n\u003cp\u003eThe outdoor tile comes in 600 x 600mm only. A larger alfresco floor is therefore a 600 x 600mm layout, and the \u003ca href=\"\/collections\/outdoor-tiles\"\u003eoutdoor tiles\u003c\/a\u003e page lists tiles made for outdoor use across every look.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eReading P3 and P5\u003c\/h2\u003e\r\n\u003cp\u003eThe scale is simple. P ratings come from a pendulum test on a wet, flat surface. P1 is low slip resistance, P2 and P3 are moderate, P4 is high and P5 is very high. R ratings come from a separate oil ramp test, from R9 for low resistance to R12 and R13 for very high. Cairnwell prints P ratings on both finishes.\u003c\/p\u003e\r\n\u003cp\u003eThe highest number is not always the right one. A heavily textured surface chosen to reach a very high rating takes more effort to clean, because the texture holds dirt. Choose a rating for the space and check current Australian Standards and CSIRO guidance for a specific project. That is the reason for two finishes. The P3 matte is smooth and easy to wipe indoors, and the P5 grip gives the traction that wet outdoor areas need. In\/out surfaces feel smoother and clean more easily while adding grip when wet, which is the balance a matte tile offers inside.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eChoosing a size\u003c\/h2\u003e\r\n\u003cp\u003eThe indoor tile comes in two sizes, and the outdoor tile in one. A larger tile means fewer joints, and large format tiles mean fewer grout lines for a cleaner look. The 300 x 600mm tile gives more flexibility in a tighter bathroom or as a wall tile. All the tiles have a rectified edge, which allows a fine grout line, and the usual recommended gap for rectified tiles is 1.5mm to 3mm.\u003c\/p\u003e\r\n\u003cp\u003eWith two neutral colours, grout changes the look more than any other choice. A tone close to the tile makes the stone look continuous, and a contrasting grout defines each tile. For Taupe: a tone close to the tile reads as continuous, a warm light grey is subtle, and a cool grey can make a warm tile look more yellow.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eWhere each tile goes\u003c\/h2\u003e\r\n\u003cp\u003eOn the printed lines, the rooms line up. A bathroom, kitchen or laundry floor suits the P3 tile, within the light traffic limit of wear 3. A covered or uncovered patio, a path or a pool surround suits the P5 tile. A wall, indoors or out, is covered by the application lines, which read Walls and Floors indoors and Walls, Floors and Outdoor Areas outdoors. Wet areas get the rating the tile carries, and a licensed tiler can confirm it for a specific project.\u003c\/p\u003e\r\n\u003cp\u003eTiles for balconies need good drainage and a textured surface, and tiles in outdoor kitchens should resist stains and be simple to wipe down. Both are the outdoor tile's job here.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eCleaning and care\u003c\/h2\u003e\r\n\u003cp\u003eCairnwell is easy to clean with standard household products, needs no sealing and has a non-porous surface. A regular mop is enough for a look-alike porcelain. Outdoor tiles usually need only rinsing and mild detergent, and matte and textured finishes hide dust and weather residue. Wash garden debris, motor oils and animal droppings off promptly, since left to sit they can stain. A textured grip surface needs a brush or mop to lift dust from its texture.\u003c\/p\u003e\r\n\u003cp\u003eA worked example: a laundry floor of 2.4m by 1.8m is 4.32 square metres. A 600 x 600mm tile covers 0.36 square metres, so the floor takes 12 whole tiles, and with 15 percent for cuts and breaks the order is 14. A 300 x 600mm tile covers 0.18 square metres, so the same floor takes 24, and 28 with the allowance. A patio of 3.6m by 3m is 10.8 square metres, which takes 30 whole 600 x 600mm tiles and 35 with the allowance.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSamples and ordering\u003c\/h2\u003e\r\n\u003cp\u003eA stone look changes with its light, so a sample laid in the room settles the colour. Order extra over the measured area for cuts and breaks, and keep spares for later repairs. The \u003ca href=\"\/collections\/tiles\"\u003etiles\u003c\/a\u003e hub shows every other range on the site.\u003c\/p\u003e","products":[],"url":"https:\/\/www.thebluespace.co.nz\/collections\/cairnwell-tile-range.oembed","provider":"The Blue Space","version":"1.0","type":"link"}