{"title":"Phoenix 5000 Series Kitchen Sinks","description":"\u003cp\u003eThe Phoenix 5000 Series kitchen sink range brings the same precision engineering Phoenix applies to its tapware into the kitchen, offering stainless steel undermount and topmount sinks sized for Australian kitchens. This page covers the full 5000 Series lineup including bowl configurations, dimensions, mounting options, and how to pair sinks with a compatible \u003ca href=\"https:\/\/www.thebluespace.com.au\/collections\/phoenix-tapware\"\u003ePhoenix tapware\u003c\/a\u003e mixer.\u003c\/p\u003e\n\n\u003ch2\u003eWhat is the Phoenix 5000 Series?\u003c\/h2\u003e\n\u003cp\u003eThe Phoenix 5000 Series is a dedicated kitchen sink range from Phoenix, an Australian-owned tapware and fixtures brand. The series uses heavy-gauge 304 stainless steel with a satin finish, and is designed to integrate cleanly with undermount cabinetry or drop into existing benchtop cutouts. Models span single bowl and double bowl configurations at standard Australian bench depths.\u003c\/p\u003e\n\n\u003ch2\u003eSingle bowl or double bowl: which configuration suits your kitchen?\u003c\/h2\u003e\n\u003cp\u003eA single bowl Phoenix 5000 Series sink works well for kitchens handling large pots and pans, as the unbroken basin gives more usable depth. A double bowl configuration suits kitchens where simultaneous washing and rinsing is common, keeping dirty and clean loads separated without extra bench space. Bowl depth across the range typically sits between 180mm and 220mm.\u003c\/p\u003e\n\u003cp\u003eFor smaller kitchens or galley layouts where bench run is limited, a compact single bowl model in the 500mm to 600mm width range is the practical choice. Larger kitchens with 900mm or wider base cabinets can accommodate the double bowl models without compromising drain clearance.\u003c\/p\u003e\n\n\u003ch2\u003eUndermount vs topmount installation\u003c\/h2\u003e\n\u003cp\u003ePhoenix 5000 Series sinks are available in undermount and topmount formats. Undermount installation bonds the sink beneath the benchtop for a flush finish with no lip to collect debris, and it requires a solid surface benchtop such as stone, Corian or engineered composite. Topmount drop-in sinks suit laminate benchtops and are faster to install, as the rim clips over the cutout edge without adhesive or under-bench brackets.\u003c\/p\u003e\n\u003cp\u003eConfirm the installation type before ordering, as the cutout dimensions and support requirements differ. Your kitchen sink installer or cabinetmaker can advise on which suits the existing or planned benchtop material.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials, finish and gauge\u003c\/h2\u003e\n\u003cp\u003eAll 5000 Series sinks use 304-grade stainless steel, which provides corrosion resistance suited to Australian water conditions including areas with higher chlorine or mineral content. The satin brushed finish reduces visible scratches and fingerprints compared with a mirror-polished surface. Sheet gauge across the range is typically 1.0mm to 1.2mm, giving the basin walls enough rigidity to resist flexing under load.\u003c\/p\u003e\n\u003cp\u003eThe satin finish also coordinates with brushed stainless or brushed nickel tapware finishes, making it straightforward to match with a \u003ca href=\"https:\/\/www.thebluespace.com.au\/collections\/taps\"\u003ekitchen mixer tap\u003c\/a\u003e in a similar tone without an exact finish match being required.\u003c\/p\u003e\n\n\u003ch2\u003eWaste and overflow fittings\u003c\/h2\u003e\n\u003cp\u003ePhoenix 5000 Series sinks are supplied with matching waste fittings in most configurations, including a 90mm basket strainer waste designed to the Australian standard drain size. Double bowl models include a dual waste kit with a centre overflow channel where applicable. Check whether the model you select includes a waste fitting or requires a separate purchase, as this varies across the range.\u003c\/p\u003e\n\u003cp\u003eStandard 40mm outlet connection means compatibility with existing Australian drainage fittings, so retrofitting the sink into an existing kitchen typically does not require drain relocation.\u003c\/p\u003e\n\n\u003ch2\u003ePairing with a kitchen mixer\u003c\/h2\u003e\n\u003cp\u003ePhoenix produces sink mixer taps designed to work dimensionally with the 5000 Series, with tap hole diameters at 35mm standard. Single taphole sinks suit a single-lever mixer, while models with two or three tapholes accommodate separate hot and cold taps or an integrated filtered water outlet. Browse the \u003ca href=\"https:\/\/www.thebluespace.com.au\/collections\/kitchen-sinks\"\u003efull kitchen sinks range\u003c\/a\u003e or the \u003ca href=\"https:\/\/www.thebluespace.com.au\/collections\/phoenix-tapware\"\u003ePhoenix tapware collection\u003c\/a\u003e to find compatible mixer options across the Cromford, Axia, and Vivid Slimline ranges.\u003c\/p\u003e\n\n\u003ch2\u003eWarranty and compliance\u003c\/h2\u003e\n\u003cp\u003ePhoenix backs its 5000 Series sinks with a manufacturer warranty covering defects in materials and workmanship. As an Australian brand, Phoenix products are manufactured to meet Australian and New Zealand plumbing standards, and the sinks are designed for compatibility with Australian cabinet sizing and drainage configurations. Retain your purchase receipt and product documentation for warranty claims.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv id=\"faq\"\u003e\n  \u003cdiv class=\"acc_wrap\"\u003e\n    \u003cdiv class=\"accordion\"\u003e\u003cb\u003eWhat is the Phoenix 5000 Series kitchen sink made from?\u003c\/b\u003e\u003c\/div\u003e\n    \u003cdiv class=\"panel\"\u003e\n      \u003cdiv\u003ePhoenix 5000 Series kitchen sinks use 304-grade stainless steel with a satin brushed finish. The sheet gauge is typically 1.0mm to 1.2mm, which provides enough rigidity to resist flexing. The 304 grade offers good corrosion resistance for Australian water conditions including areas with elevated chlorine or mineral content.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"acc_wrap\"\u003e\n    \u003cdiv class=\"accordion\"\u003e\u003cb\u003eAre Phoenix 5000 Series sinks undermount or topmount?\u003c\/b\u003e\u003c\/div\u003e\n    \u003cdiv class=\"panel\"\u003e\n      \u003cdiv\u003eThe Phoenix 5000 Series is available in both undermount and topmount configurations. Undermount suits stone or engineered benchtops and gives a flush finish with no rim. Topmount drop-in models are compatible with laminate benchtops and require a standard cutout. Check the specific model code before ordering, as installation requirements differ.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"acc_wrap\"\u003e\n    \u003cdiv class=\"accordion\"\u003e\u003cb\u003eWhat size are Phoenix 5000 Series kitchen sinks?\u003c\/b\u003e\u003c\/div\u003e\n    \u003cdiv class=\"panel\"\u003e\n      \u003cdiv\u003eThe Phoenix 5000 Series spans single bowl models from approximately 500mm to 750mm wide and double bowl models up to 900mm wide, sized for standard 600mm deep Australian base cabinets. Bowl depth ranges from around 180mm to 220mm. Confirm the exact dimensions on the individual product page before committing to a cabinetry cutout.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"acc_wrap\"\u003e\n    \u003cdiv class=\"accordion\"\u003e\u003cb\u003eWhat waste fitting does a Phoenix 5000 Series sink use?\u003c\/b\u003e\u003c\/div\u003e\n    \u003cdiv class=\"panel\"\u003e\n      \u003cdiv\u003ePhoenix 5000 Series sinks use a 90mm basket strainer waste with a standard 40mm outlet, which is compatible with Australian standard drainage fittings. Most models include the waste fitting in the box; double bowl versions include a dual waste kit. Confirm whether your specific model includes a waste before purchasing one separately.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"acc_wrap\"\u003e\n    \u003cdiv class=\"accordion\"\u003e\u003cb\u003eWhich Phoenix tapware mixer works with the 5000 Series sink?\u003c\/b\u003e\u003c\/div\u003e\n    \u003cdiv class=\"panel\"\u003e\n      \u003cdiv\u003ePhoenix sink mixers in the Cromford, Axia, and Vivid Slimline ranges are designed to pair with 5000 Series sinks, fitting the standard 35mm taphole diameter. Single taphole models suit a single-lever mixer; multi-hole configurations allow separate hot and cold taps or a filtered water outlet. Match the finish to the satin stainless sink for a cohesive result.\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\n    #faq { margin: 20px 0 75px; }\n    .acc_wrap { margin-bottom: 7px; border-radius: 8px; overflow: hidden; border: 1px solid rgba(240,240,240,1); }\n    .accordion { background-color: #4f6d85; color: white; cursor: pointer; padding: 16px; width: 100%; border: none; text-align: left; outline: none; transition: 0.4s; line-height: 1.2; }\n    .panel { opacity: 0; background-color: white; overflow: hidden; height: 0; transition: height 0.5s ease, opacity 0.7s linear; }\n    .panel \u003e div { margin: 25px; }\n    .panel.active { opacity: 1; height: auto; }\n\u003c\/style\u003e\n\u003cscript\u003e\ndocument.addEventListener(\"DOMContentLoaded\", function() {\n  var acc = document.getElementsByClassName(\"acc_wrap\");\n  for (var i = 0; i \u003c acc.length; i++) {\n    acc[i].addEventListener(\"click\", function() {\n      var panel = this.querySelector(\".panel\");\n      var all = document.querySelectorAll('.panel');\n      for (var j = 0; j \u003c all.length; j++) { if (all[j] !== panel) { all[j].classList.remove(\"active\"); all[j].style.height = 0; } }\n      panel.classList.toggle(\"active\");\n      panel.style.height = panel.classList.contains(\"active\") ? panel.scrollHeight + \"px\" : 0;\n    });\n  }\n});\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the Phoenix 5000 Series kitchen sink made from?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Phoenix 5000 Series kitchen sinks use 304-grade stainless steel with a satin brushed finish. The sheet gauge is typically 1.0mm to 1.2mm, which provides enough rigidity to resist flexing. The 304 grade offers good corrosion resistance for Australian water conditions including areas with elevated chlorine or mineral content.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are Phoenix 5000 Series sinks undermount or topmount?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Phoenix 5000 Series is available in both undermount and topmount configurations. Undermount suits stone or engineered benchtops and gives a flush finish with no rim. Topmount drop-in models are compatible with laminate benchtops and require a standard cutout. Check the specific model code before ordering, as installation requirements differ.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What size are Phoenix 5000 Series kitchen sinks?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Phoenix 5000 Series spans single bowl models from approximately 500mm to 750mm wide and double bowl models up to 900mm wide, sized for standard 600mm deep Australian base cabinets. Bowl depth ranges from around 180mm to 220mm. Confirm the exact dimensions on the individual product page before committing to a cabinetry cutout.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What waste fitting does a Phoenix 5000 Series sink use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Phoenix 5000 Series sinks use a 90mm basket strainer waste with a standard 40mm outlet, which is compatible with Australian standard drainage fittings. Most models include the waste fitting in the box; double bowl versions include a dual waste kit. Confirm whether your specific model includes a waste before purchasing one separately.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Which Phoenix tapware mixer works with the 5000 Series sink?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Phoenix sink mixers in the Cromford, Axia, and Vivid Slimline ranges are designed to pair with 5000 Series sinks, fitting the standard 35mm taphole diameter. Single taphole models suit a single-lever mixer; multi-hole configurations allow separate hot and cold taps or a filtered water outlet. Match the finish to the satin stainless sink for a cohesive result.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/6938\/2771\/collections\/Phoenix-5000-Series-White-Kitchen-Sink-The-Blue-Space_4923c61c-36a4-46c5-9b0f-29bffb8498bf.jpg?v=1688537732","url":"https:\/\/www.thebluespace.co.nz\/collections\/phoenix-5000-series-kitchen-sinks\/collection-japandi.oembed","provider":"The Blue Space","version":"1.0","type":"link"}