Skip to content
Back to RenoIQ

Do I Need a Floor Waste in My Bathroom?

Do I need a floor waste in my bathroom?

You’ve picked the perfect tiles, the dream vanity, and the freestanding bath that makes you feel like you’re in a day spa, but then someone asks, “Hey, did you include a floor waste?”
So… what exactly is a floor waste, when do you need one, and are there rules about it in Australia? Let’s clear it up

What's a floor waste?

 

A floor waste (sometimes called a floor drain) is a small drain in the floor, usually in the corner or centre of a bathroom or laundry. It’s designed to catch any excess water that escapes from showers, sinks, baths, or other fittings, and helps avoid unwanted puddles or worse, water damage.
It’s not always about cleaning up spills either, in some homes, plumbing fixtures are designed to drain to the floor waste as part of the water management plan.

Do you have to have a floor waste in Australia?

 

That depends on your bathroom setup and the type of home you're in.
According to the National Construction Code (NCC), here’s the general rule:
You need a floor waste in bathrooms and laundries in Class 2, 3, or 4 buildings (think apartments, hotels, and some multi-unit townhouses), especially when there's no built-in overflow in fixtures like the bath or basin.
But for standalone homes (Class 1), it’s a bit more flexible. You might not need a floor waste if all your plumbing fixtures have proper overflow protection (like an overflow hole in the basin or bath) and the bathroom is designed to contain water.

Building code recap

 

Apartment / multi-dwelling: Yes (usually), Especially if no built-in overflows on fixtures.

Freestanding homes (Class 1): Not always, depending on layout and drainage design.

Bathroom with hobless shower: Often required.

Laundry: Yes, floor waste required in most builds.

Best bet? Always check with your plumber or builder to make sure you’re ticking all the boxes for your build type.

Why you might still want a floor waste

 

Even if you’re not technically required to have one, there are a few reasons why you might still want to include a floor waste:

  • Peace of mind — especially if you’ve got kids who treat the bathroom like a splash park
  • Walk-in or open showers — where water can spread across the floor more easily
  • Easier to clean — you can hose down or mop the floor without worrying
  • No built-in overflow in your fixtures — like some freestanding baths or wall-hung basins

When you might not need one

 

You can potentially skip a floor waste if:

  • Your bathroom fixtures all have built-in overflows
  • The floor is fully waterproofed and contained, with no risk of water spilling out
  • You’re in a freestanding house, and your builder signs off on the design
    But again, check your local codes and builder’s advice. Some councils or certifiers may still prefer (or require) one just to be safe.

One last thing worth noting

 

Honestly, in most cases, it’s better to include one if you can. It’s a small detail that could save you a lot of hassle down the track, especially in open-plan or wet-area style bathrooms.
And hey, these days you can get super sleek floor waste covers that blend right into your tiles, so it doesn’t have to mess with your aesthetic, either

Explore some of our favourite brands

Previous article Do I Need an Overflow in My Kitchen Sink?
Next article Do I Need an Overflow in My Bath?