Skip to content

Indigo Showers

0 Items

Whoops, there are none available in your area

View all products

What the Indigo shower collection holds

This collection holds two Indigo products, each in two finishes. The Indigo Ciara hand shower is a hand piece on an adjustable wall bracket, in chrome and in matte black. The Indigo Ciara ceiling arm is a 300 mm arm that hangs a head from the ceiling, also in chrome and in matte black. The range is small, so it is worth knowing what each one does and what it needs before you buy.

Check the supply, the mixer, the height, the flow, the finish and the fitting before you buy. For the whole brand, see Indigo. For the wider guides, see hand held shower heads, shower arms and showers.

The Ciara hand shower

The Ciara is a contemporary hand shower on an adjustable bracket that pivots up and down, which makes it suitable for use as a main shower. It is made for retrofit and fits easily onto an existing shower spigot. It has three spray settings, rainfall, mist and combination, and silicone nozzles that are easy to clean. The head is metal with an electroplated finish, and the range is designed in Australia.

The key figures are these. The hand shower is rated 3 star at 9 litres per minute. The operating pressure runs from a minimum of 150 to a maximum of 1000 kPa. The box holds the hand shower, the adjustable wall bracket, the shower hose and the installation instructions. A hand shower with a bracket is one of the simplest ways to change a shower without touching the tiles, because the bracket takes the place of the old head and the hose joins the same outlet.

What retrofit onto an existing spigot needs

A spigot here means the outlet that the old head or hose connects to. The hand shower fits easily onto it. Before you buy, check three things. The outlet must take the connection, which for most hand showers is a half inch thread. The outlet must be at a height that suits the bracket, since the bracket is fixed to the wall near it. And the mixer or the tap must be able to send water to this outlet and nothing else, or have a diverter if there is a second head.

The connection is made up of a threaded nipple, a seal, a cover plate, a wall elbow, the hand shower, a check valve held by a circlip, rubber washers, a hexagonal fitting, the hose and a conical fitting. The check valve must sit in the wall elbow with its arrow pointing in the direction of flow, and water will not flow from the hand shower if it is fitted the wrong way round. A swivel bracket hand shower is typically used with a wall mixer, or with a diverter mixer when it sits alongside a shower arm and head. The Ciara does not include a mixer, so treat it as a separate purchase and match the finish. For the options, see shower mixers.

Bracket and hose: what to look at

Hand showers differ in the parts they come with. One style has a 120 mm head with three spray functions, a slider on the holder and one hose, rated 3 star at 9 litres per minute at 150 to 500 kPa and weighing 0.71 kg. Another is rated 4 star at 6.5 litres per minute, with a height-adjustable holder with a metal slide and a width of 110 mm. Read the hose length, the head size and the bracket type on any product, since a hose that is too short limits where the hand piece can go.

The Ciara bracket is adjustable and pivoting, and the holder inclination angle is adjusted by pivoting. The hose is part of the set. Check the hose length and the head diameter in the product specification before ordering if the reach matters to you.

Spray settings and silicone nozzles

The three settings are rainfall, mist and combination. Spray patterns range from strong jets for massage to wide, gentle mists, and multi-function heads suit families with different preferences. A rainfall setting spreads the water, a mist setting is lighter, and a combination setting mixes them. The silicone nozzles matter for care. Silicone nozzles can be rubbed with a finger to dislodge mineral deposits, so the limescale that builds on the face comes off without tools.

The star rating and the pressure

The Ciara hand shower is rated 3 star at 9 litres per minute. The Plumbing Code of Australia requires new developments to use showerheads of no more than 9 litres per minute, which equals 3 stars, and the band for that rating is more than 7.5 to 9.0 litres per minute. A simple check at home is the bucket test. A 10 litre bucket that fills in under 60 seconds under the shower points to good pressure.

Moving from 9 to 7.5 litres per minute can save more than 5,000 litres of water a year, but some instantaneous gas hot water systems need a higher flow to fire and may not cope with low-flow heads. A 3 star head at 9 litres per minute suits most systems. A high-pressure style head changes the nozzle design to feel stronger and cannot increase mains pressure. For the best performance the hot and cold water pressures should be equal.

The Ciara ceiling arm

The ceiling arm hangs a head from the ceiling over the middle of the shower. It is 300 mm in height, 50 mm in depth and 50 mm in width, with a round base, in metal. The chrome arm has a chrome plated finish and the matte black arm an electroplated finish. The inlet pressure range is 150 to 1000 kPa and the maximum hot water temperature is 80 degrees C. The box holds the arm and the installation instructions, so the head is a separate purchase. An arm sold on its own carries no star rating, because it passes the water and does not control the flow.

Ceiling-mount arms hang from overhead and suit rounded or rose heads for a rainfall effect. They take more vertical space and work best with a high ceiling. The plumbing for a ceiling arm runs through the ceiling, not the wall, so decide early. Confirm the connection thread of the arm against the head you plan to fit. Most arms and heads share a standard half inch thread, so check the specifications of both parts before buying. Heavy heads, such as rain heads, may need a sturdier arm.

How high a head on the ceiling arm sits

Recommended heights sit within a few hundred millimetres of each other. A head on a ceiling arm sits at 2100 to 2200 mm above the finished floor, depending on the ceiling. A fixed wall head sits at 2000 to 2100 mm, and 2100 to 2200 mm for a tall household. Leave at least 20 cm between a rain head and the user's head. So subtract the arm length and the head height from the ceiling height, and check that the head lands at the level you want. Confirm the heights at rough-in, before tiling.

For the wider choice of ceiling-mounted heads and arms, see ceiling showers.

Chrome or matte black

Both products come in chrome and in matte black. The hand shower comes in a chrome finish and an electroplated matte black finish. The ceiling arm comes in chrome plating and an electroplated black. For finish-led browsing, see chrome showers and black showers. Choose a finish that suits the basin mixers, bath taps and accessories, so match the shower to the rest of the room.

Whichever finish you choose, check that the mixer and the other fittings use the same tone, and repeat a contrasting finish in more than one place in the room.

How to clean a Ciara shower

Wipe both products clean with a soft, damp cloth and mild detergent, and avoid abrasive detergents, cleaning powders, scouring pads, strong disinfectants and cleaners containing hydrochloric or phosphoric acid, which damage the finish. Dry the fitting with a soft cloth after use, since drying prevents mineral deposits and water marks. For chrome, a soft-bristled toothbrush works on a limescale spot. For matte black, avoid abrasive cleaners, scouring pads, bleach, vinegar and lemon juice, because acid can damage the coating over time and dull the finish. Avoid waxes or polishes on matte black too, because they fill the surface and give a polished look.

Clean the head monthly if your water is hard, and every two to three months if your water is soft, and wipe it after each shower. For a hand piece, tie a sturdy plastic bag of warm water with a few drops of mild dishwashing liquid over the head, soak for 30 to 60 minutes, rinse and dry with a soft cloth. White vinegar can damage the coating, so use warm soapy water on an electroplated finish.

Fitting the hand shower and the arm

A licensed plumber must install both products. The steps below are general, because factors may alter the method. Flush the pipework first and close the water mains and isolating valves. For the hand shower, check the threaded nipple for length and cut it square if needed, apply thread tape, screw on the wall elbow and cover plate without overtightening, put the check valve in place, and fit the hose with its rubber washers. For the ceiling arm, slide the cover plate onto the larger diameter of the arm, screw the arm onto the threaded nipple and push the plate against the ceiling face. Finish by turning the water on and checking for leaks.

That puts the Indigo pieces on the plumber's side of the line. In Western Australia an owner or occupier may maintain, repair or replace a shower head, while other water supply plumbing work must be done by a licensed plumber or permit holder, and other states differ. A new ceiling arm needs the pipe run through the ceiling, which is plumber work in any state.

Frequently Asked Questions

What is a rail shower and why is it popular in Australian bathrooms?

A rail shower (also called a slider rail shower or shower rail kit) includes a hand shower mounted on an adjustable rail, allowing users to slide the shower head up or down to their preferred height. Rail showers are among the most practical and versatile shower options available, they suit users of different heights, are ideal for bathing children, and are easy to use for rinsing down shower walls. They are widely used in family bathrooms across Australia.

What length shower rail do I need?

Standard shower rails in Australia are typically 600mm or 900mm in length. A 600mm rail is compact and suited to smaller showers, while a 900mm rail gives greater height adjustment range, ideal for households with users of varying heights. The rail is installed vertically on the shower wall, and the hand shower clips onto a holder that slides along the rail.

What is the flow rate of a rail shower, and does it need to meet WELS standard

In Australia, all shower heads including those sold as part of rail shower kits must carry a WELS (Water Efficiency Labelling and Standards) rating. Most Australian rail showers achieve a 3-star WELS rating with a flow rate of 9L/min or less. Some water-saving models reach 4 stars. A lower flow rate doesn't necessarily mean a weaker shower, modern shower heads use air-injection technology to maintain pressure while reducing water use.

Can I replace my existing shower head with a hand shower?

Yes, in most cases a standard hand shower with a hose can be connected to an existing shower arm using a standard 1/2" thread connection. If you currently have a fixed overhead shower, you may want to replace the shower arm with a diverter or combo outlet to enable switching between the fixed position and the hand shower. A plumber can advise on the best approach for your specific setup.

What mixer do I need for a rail shower with overhead shower?

You need a shower mixer with a diverter function, either a built-in diverter on the mixer body, a separate diverter valve, or a combination shower outlet that manages both functions. Consult your plumber during the rough-in stage to ensure the water outlets are positioned correctly for the rail and overhead positions. The Blue Space stocks complete combination rail-and-overhead shower sets from brands including Phoenix, Meir, and Caroma.

What is a wall shower head?

A wall shower (or wall-mounted shower head) is a fixed shower head mounted to the shower wall via a shower arm. The shower head position is fixed, though some models have an adjustable arm allowing the angle and extension to be altered. Wall showers are a classic, simple, and practical choice for any bathroom.

What is a shower mixer and how does it work?

A shower mixer (or shower tap) is the control valve that regulates the flow and temperature of water to your shower. A single-lever mixer controls both temperature and flow with one handle. A thermostatic mixer maintains a pre-set water temperature even if pressure changes elsewhere in the system, a safer and more convenient option, particularly for households with children. Shower mixers in Australia must comply with AS 3718 standards.