White door handles buying guide
White door hardware is made with a white coating over a metal base, and the spec line shows powder coated. That makes white different from chrome or brass, where the colour is the metal or a plated layer, and it changes how you choose and how you clean. This collection holds white pull handles, flush pulls, cavity sliding sets, entrance sets, hinges, stops and adaptor kits. This guide sets out what white hardware is made of, which types exist in white, how to match it to the door, which numbers decide fit, and how to care for the finish. For the wider range, see door handles, interior door handles and door hardware.
What white hardware is made of
White is a coating, and the base metal sits under it. A powder coated finish, and the bases include stainless steel for the pull handles and cavity sets, zinc alloy for the entrance sets and door stops, and brass for the loose pin and fixed pin hinges. The Lane matte white butt hinge is 304 grade stainless steel in a matte white finish. A matte white powder coat is baked on to improve durability, over a solid brass handle. Read the material line and the finish line on each product page, because two white handles can have different bases.
Which types are available in white
White comes in fewer types than black or brass, and the collection reflects that. It is mostly pulls, sliding door hardware, hinges and stops, with entrance sets and adaptor kits. Zanda's own matt white range lists the same spread, with pull handles, lever and privacy sets, lock kits, closers, hinges, door stops and a sliding door edge pull. For a lever on an interior door, check the entrance and privacy product pages in this collection and the wider passage door handles and privacy door levers pages, which cover other finishes. For white knobs, see door knobs.
White pull handles for entrance doors
Pull handles are sold back to back, with set lengths and fixing centres. The Zanda Duke pull handle is 330mm with 300mm centres, 630mm with 600mm centres and 930mm with 900mm centres, each with a 55mm projection and a 30mm width. The Zanda Toorak pull handle is a 625mm square tube with 600mm centres and a 60mm projection. The Zanda Polo offset pull is 640mm with 600mm centres and a 110mm projection, and the Nitro Plus is 625mm with 600mm centres. The Duke, 316 marine grade stainless steel, suited to indoor and outdoor use. An offset pull moves the handle away from the lock, and offset pulls suit hinged, pivot and sliding doors. See pull handles, Zanda door pull handles and Zanda Duke pull handles.
White flush pulls and cavity sets
Sliding doors need a flush pull, because a projecting handle catches on the frame. The Zanda Duke flush pull is 250 by 40mm with a 12mm projection, and the Zanda Verve flush pull is 300 by 37mm. The Momo Handles Jena flush pull is 114mm long, and the Momo Handles Fold flush pull has 128mm between its fixing points and mounts horizontally or vertically. The Zanda round cavity sliding sets have a 65mm round flush pull for a standard 54mm hole, with a template and instructions included, and suit doors 32 to 38mm thick. Each kit includes an edge pull, which lets you draw the door out of the cavity. See sliding door handles, flush pulls and Zanda round cavity handles.
Entrance sets
The Zanda Duke entrance sets in white come with a 70mm Euro cylinder, key and turn or key and key, a Euro mortice lock, a 60mm backset and a door thickness of 35 to 53mm. The sets are keyed differently, and the lever is powder coated zinc alloy. For a keyed door, confirm the lock type, the cylinder length and the door thickness on the product page. See entry door lock sets and exterior door levers. For a security screen door, the Yale Quattro hinged security door lock comes in white with a powder coated finish for a standard 20mm door, and the Lockwood hydraulic screen door closer comes in white for heavier screen doors. See screen door hardware and screen door closers.
Match the white to the door
The choice splits into two. A tonal look suits a light door: white hardware on a white door blends in and keeps the room open. A contrast look suits a dark door, where a white handle reads as a feature. Pair white handles with other white hardware to build a cohesive scheme. On white doors brass and black stand out, while chrome, nickel and white blend in. Decide whether the handle should disappear or be seen, then choose the finish. For other finishes beside white, see matte black door handles, brushed nickel door handles, chrome door handles and brass door handles.
Keep the hinges and stops in white
Keep hinges, latches and escutcheons in the same finish as the handle. The collection includes the Zanda loose pin butt hinge at 100 by 75mm, the Zanda fixed pin butt hinge at 100 by 100mm, the Zanda fast-fix bearing hinge at 100 by 70mm and the Lane matte white butt hinge at 100 by 75 by 2.5mm. It includes the Zanda magnetic door stop and skirting fix door stop and the Momo Handles Luv floor mounted door stop in matte white. See hinges, Zanda hinges and door stops.
Numbers that decide fit
Fit comes from door thickness, the hole already in the door and the backset. The Zanda Duke entrance sets suit doors 35 to 53mm thick on a 60mm backset. The Zanda round cavity sets suit doors 32 to 38mm thick on a 54mm hole. The pull handles use fixing centres, so measure the distance between the holes or the mounting points before you order. The Zanda rose adaptor kit is 65mm by 10mm for situations where the original hole is larger than 55mm, and the adaptor screws onto the existing rose. The Yale and Lockwood sets have their own numbers, a 20mm door and a 28mm backset for the lock, and the closer takes a weight of up to 29kg. Read the spec line on the product page you buy.
How the white finish wears
A powder coat is a coating, and coatings wear. Wear and tear is unavoidable in high-use areas. Dirt and grease, combined with friction from hands, wear the finish away over time, and a powder coat will not chip or peel if cleaned correctly and regularly. One finish-care page also warns that powder coated finishes can chip with rough handling. The practical point is to keep the surface clean, because dirt and grease are the cause of wear.
Care
Clean white hardware gently. Wipe with a damp microfibre cloth and avoid chemicals and harsh cleaning products. A simple method works for powder coated handles. Mix 1 litre of water with 50ml of neutral detergent, and wipe with a damp rag using gentle repeated pressure, not scrubbing. Rinse with a rag dampened in clean water, then dry the handle to prevent streaks. Clean other door handles every 6 months, and black handles at least every 2 months. Abrasive pads and strong solvents can thin the coating. Handles that stay outdoors should be sheltered from sun, wind, salt, spray and humidity.
Which white, and the fingerprint question
White is not one finish. Satin white, matte white and metal matte white are different surfaces, and Zanda makes White, Satin White and Matt White. And keep to it across the door. On marks, polished chrome shows fingerprints and fine scratches readily, while satin stainless and brushed nickel hide fingerprints better.
Momo Handles flush pulls, fit numbers
The Momo Handles Jena flush pull is steel in matt white, 114 by 34mm with a 2mm projection, a 102mm hole centre distance and an 11mm mortice depth. The Momo Handles Fold flush pull is stainless steel in matt white, 174mm overall with 128mm between its fixing points, a 46mm projection, a cabinet thickness of 16 to 25mm and a 12.5mm mortice depth. Both suit wardrobe sliding doors, and the Fold can be mounted horizontally or vertically. A flush pull needs a recess cut into the door, so the mortice depth and the door thickness must match the numbers on the product page. See Momo architectural door hardware.
Hinge details
How the hinges are supplied. The Zanda butt hinges come pre-packaged with screws for timber and metal frames. The Lane matte white loose pin butt hinge is sold as a pair with timber fixing screws, and it needs a section of the door edge and frame to be rebated so the hinge sits flush. That rebate is part of the job, so confirm that your door and frame are cut for a butt hinge of that size before you order. A Zanda fast-fix bearing hinge is 100 by 70mm with a 2.5mm projection. Keep the hinge size the same on every hinge on a door.
Match the finish to the room
A room-by-room view helps. In bedrooms and low-touch rooms, the finish can be matte black, brass or a satin finish. In bathrooms, match the taps and accessories. In kitchens and utility rooms, satin finishes are easier to keep clean. For projects with many doors, standardise on one or two finishes to reduce mismatch and simplify maintenance. White fits those rules as a quiet finish: it blends with a white door, and pairing it with other white hardware keeps the scheme consistent. Glass, dual-tone and aged brass are other choices for white doors, which is why white is a choice and not a default.
Common mistakes
The same few errors come up again and again. The first is treating white as one finish: satin white, matte white and metal matte white are different surfaces, so a mismatch shows. The second is cleaning with abrasive pads or strong solvents, which thin the coating. The third is ordering a flush pull without checking the recess depth and door thickness. The fourth is ordering one hinge size for a door cut for another. The fifth is assuming a coated handle outdoors needs no shelter, when it needs protection from sun, wind, salt, spray and humidity. Each is avoided by reading the spec line and measuring first.
Our recommendation
Choose white when you want the hardware to blend into a white door or to give a clean contrast on a dark door. Read the spec line for the coating and the base metal, check the door thickness, the hole and the backset, and order the whole door from one range so the white tones match. Keep the hinges and stops in white, clean with a damp cloth or mild detergent, and avoid abrasive products. That order avoids the common mistakes: a white that does not match, a coating worn by harsh cleaning, and a set made for a different door thickness.
Questions about white door handles
Can you get white door handles?
Yes. The white hardware here spans pull handles, flush pulls, cavity sliding sets, entrance sets, hinges, stops and a security screen door lock, all in a powder coated white finish on the product pages. White is not limited to one type, so a whole door can be dressed in it, from the pull on the front door to the cavity set on the bathroom.
Are white door handles good?
They suit a white door or frame well, because the hardware blends in. A white handle on a light door gives a tonal look and on a dark door a contrast look. Brass and black stand out against white while chrome, nickel and white blend in. Whichever look you choose, use one finish across the handle, hinges, latches and escutcheons so the set looks cohesive.
Do all door handles fit all doors?
No. Fit depends on the door thickness, the backset and the size of the hole. The Zanda Duke entrance set lists 35 to 53mm doors and a 60mm backset. The Zanda round cavity sets list 32 to 38mm doors and a 54mm hole, with a template supplied, and an adaptor kit covers a hole larger than 55mm. Measure the door across the edge and the backset from the door edge to the centre of the hole, not across the hole itself.
Looking after a white powder coat
Powder coat is baked onto the metal, and wear on a high-use door is unavoidable over time. Wipe with a damp microfibre cloth and avoid chemicals. Clean with neutral detergent at 50ml per litre of water, using gentle pressure, then rinse and dry. Grease and friction wear the finish, so clean every six months for most finishes.
Polished chrome shows fingerprints and fine scratches, and satin stainless and brushed nickel hide them better.
White outdoors
The Zanda Duke, Toorak and Nitro pull handles are 316 marine grade stainless steel for indoor and outdoor use. A matte white powder coat outdoors should be sheltered from sun, wind, salt and spray, so a covered entry suits it better than an exposed one. If the door faces the weather, check the material line of the product page for the pull you want.
The white hardware on this page is mostly Zanda, in Duke pulls, flush pulls and entrance sets, Round Cavity sliding kits, butt hinges, rose adaptors and magnetic door stops, with Momo Handles, Lane and Lockwood pieces alongside. Because white is sold in satin, matte and metal matte surfaces, check the finish name on each product page and keep hinges, stops and handles in the same surface so the set reads as one. Order the matching hinges and door stops in the same pass, since a white handle against an off-white hinge is the mismatch most people notice first.
White pulls and flush pulls by size
The white pull handles come in a range of lengths, and them. The Zanda Duke pull is 330, 630 or 930mm long, with fixing centres of 300, 600 and 900mm. The Toorak is 625mm, with 600mm centres, the Polo offset pull is 640mm, and the Nitro Plus is 625mm. Choose the length by the width of the door and the height of the person who uses it, and match the fixing centres to the holes in a replacement.
The white flush pulls suit sliding and cavity doors. The Zanda Duke flush pull is 250 by 40mm, the Verve is 300 by 37mm, and the Momo Handles Jena and Fold pulls are 114mm and 128mm. The shorter pulls suit cupboards and light sliders, and the longer ones suit full-height doors.
White hardware looks best when it suits the door and the wall. A white handle on a white door gives a quiet, tonal look, while the same handle on a coloured door stands out. Check how the white compares with the paint, because a cool white beside a warm cream looks off. Wipe white handles with a soft damp cloth and avoid abrasive cleaners, which can dull the finish and leave marks.
