What white floor tiles covers
This collection gathers every tile on the site that carries both the white colour tag and the floor tile application tag. The tiles share a colour and a use, so the page is a mix of looks: terrazzo, travertine, limestone and other stone looks, marble, fish scale, brick, gloss glazed squares and mosaics. Formats run from a 22.5 x 900mm plank and a 23mm penny round to 600 x 1200mm panels. Sizes, finishes and slip ratings sit on each listing, so this guide stays with what the listings print and with how white behaves on a floor.
Two sister pages cover the same ground from other angles. White tiles holds the colour across walls and floors, and floor tiles holds the use across every colour. The tiles hub links every category on the site. For a wet room, bathroom tiles adds the wall view, and for an outdoor floor, outdoor tiles narrows the list to tiles made for it. A grey floor is a short step away at grey floor tiles.
One caution applies to the whole page. The floor tag is applied to tiles whose listings describe themselves quite differently. Some print Walls and Floors, some print Floors only, and at least one prints Walls as its application and a slip rating of P1. Wear lines vary too, and slip ratings run from P1 to P5. Read the slip, wear and area lines on the tile you like before it goes on a floor plan. The sections below show where the differences sit.
Why white works on a floor
White reflects light. A Brisbane tile retailer's bathroom guide says that makes a bathroom feel larger and airier, and it singles out small or windowless bathrooms where natural light is limited. A second Brisbane retailer says white tiles brighten a room and help spaces feel more open, across bathrooms, kitchens, living areas and laundries. A national retailer lists the same rooms and adds bedrooms, dining areas and select outdoor options.
White is also a neutral backdrop. A Perth retailer describes it as cooling by nature and as an ideal neutral base, and the Brisbane guide adds that colour can come from accessories, towels or paint without clashing with the floor. That is the practical case for a white floor. The room can change around it.
The listings use many names for white: White, Bianco, Off White, Ivory, Pearl, Carrara White, Perisher White Marble and Smooth Clay. A white floor is rarely a single flat colour, and the sections below group the ranges by look so the shades make more sense.
Finish: gloss, matte, honed, lappato and grip
A Brisbane retailer notes that gloss reflects more light, while matte is softer and hides minor marks better. A second Brisbane guide makes the floor point directly: matte white on the floor adds grip and reduces slipperiness while keeping the look soft and subtle, and glossy white is better suited to walls, where it gives a polished, reflective surface. A national retailer lists the finish families as matt, gloss, polished, honed, satin and grip.
Most listings on this page print a matte or grip finish. The exceptions are worth knowing. The Perisher White Marble listings in 300 x 600mm, 600 x 600mm and 600 x 1200mm are polished rectified porcelain, and the Perisher 300 x 300mm is matt. Roccia White is a lappato finish, and Auralis Off White is a honed finish printed as 3D. Cottesloe is a honed marble mosaic. Sicily is gloss.
The finish names on this page show a choice between a surface that shows light and a surface that holds grip. Polished and gloss listings print a shine that looks bright in a photograph and on a dry hallway. Grip listings print a texture. Matte sits between them. The right pick follows the room, which the slip section below covers.
Slip ratings and wear lines
Listings print slip ratings under two systems. The P system runs from P1 to P5, and the R system, such as R10 on Plastra, is a separate scale. Several listings print P5, including Bianco Josie, Pearl Ivy, Tilly Tundra and Valerie, and each of those has a grip finish. Others print P4, including Island, Casuarina, Nimbus and Roccia, or P3, including Tuscan, Soluna, Avedon, Cairnwell, Meander and Matrix. Eton prints R10/P3.
The low ratings need attention. Southside, Avalon and Kings Marble carry P2 on their white listings, and the Southside spec calls P2 a high slip risk that is not recommended for wet areas. Theo prints P1 and an application of Walls, which makes it a wall tile on that listing even though it sits here. Auralis prints Not rated, and so does the tumbled limestone subway tile. If the floor is a bathroom, laundry or any wet area, those listings need a closer read.
Several listings also print an area line. Clio Mixed in 600 x 600mm says Indoors. Roccia White Lappato prints an application of Floors with an area line of Indoors. Nimbus, Tilly Tundra and Plastra's 450 x 900mm listing print Indoors and Outdoors. Meander and Matrix are described as suitable for flooring in dry areas. Avedon and Cairnwell are rated to AS 4586-2013 and recommended for indoor wet areas including bathrooms, kitchens and laundries.
Wear lines run separately from slip. Most listings print a wear rating of 4, which the listings describe as suitable for floors in normal use areas with low risk of scratching. Auralis, Avedon, Cairnwell and Sicily print a wear rating of 3, described as suitable for floors in light traffic areas with normal shoes. Eton prints 5, described as suitable for high traffic and commercial areas. A bedroom or a quiet living room is the natural fit for a wear 3 tile, and a hallway or a kitchen is the natural fit for a 4 or a 5.
Terrazzo looks
The terrazzo look tiles page has the full family, and four terrazzo ranges appear here in white. Southside is the classic Venetian look, Australian made, matte, in 300 x 300mm, 300 x 600mm, 450 x 450mm and 600 x 600mm. Island is a subtle small chip terrazzo in neutral matte colours, and its white listing is 300 x 600mm at P4.
Clio is a large grain terrazzo, described as bold, exciting and full of personality, and the Mixed listing here is 600 x 600mm at P4 in a Tech Grip matte finish. Theo is a smooth matte terrazzo with a contrasting grain in 200 x 200mm, and its own copy recommends pairing it with the Theo textured subway on the walls. A Perth retailer pairs white tile with smooth terrazzo style flooring, which is the look these ranges give.
Travertine looks
The travertine look tiles page covers the family. Tuscan is described as capturing the look of natural travertine with the durability and low maintenance of glazed porcelain. Its white listing is matte at P3 in 300 x 600mm, 600 x 600mm and 600 x 1200mm, and its area line reads indoors and covered outdoor areas.
Two grip travertine looks give a white floor more texture. The Bianco Josie listing is a cross cut travertine, described as showing the natural layers of stone for a more organic, textured and architectural tile, and it prints P5 in a grip finish in 300 x 600mm and 600 x 600mm. The Pearl Ivy listing is a vein cut travertine in 600 x 600mm, with 24 faces and a speck, at P5 in a grip finish and printed for indoors and outdoors. Valerie is a cobblestone porcelain in Ivory, described as bringing the charm of natural travertine without the upkeep. It prints P5 in a grip finish, a tumbled edge and a 307 x 307mm format.
Brisbane retailer notes say white pairs with timber and travertine accents. An Australian paver supplier and an interiors firm both describe travertine as a stone with soft, natural variation. A porcelain version keeps that surface without the sealing real travertine needs.
Stone and limestone looks
A wide group borrows from stone. Avedon is a limestone look porcelain with soft tonal variation and gentle veining, in White, Chalk and Beige. The white listing prints P3 rated to AS 4586-2013 in 300 x 600mm and 600 x 600mm, with a wear rating of 3. Cairnwell is a modern stone look with soft tonal variation and subtle veining, in White and Taupe, with the same P3 and wear 3 lines in 300 x 600mm and 600 x 600mm.
Nimbus captures the soft movement of natural stone, with 24 unique faces, at P4 in 300 x 600mm and 600 x 600mm. Casuarina is a modern take on natural stone, with a matte finish described as designed to provide additional grip when water is applied, and it prints P4. Tilly Tundra is a Tundra look porcelain with a subtle gold flecked vein, at P5 in a grip finish. Burleigh is described as natural stone without the care that comes with it and prints a cushioned edge. Avalon is an innovative twist on regular stone production with subtle vein movement.
Auralis in Off White brings soft earthy tones in a smooth honed finish, Not rated for slip with a wear rating of 3. Roccia in White Lappato captures raw stone in refined porcelain at P4 in 600 x 600mm and 600 x 1200mm. Soluna draws on the Mediterranean coast with warm natural tones and soft textures in a 150 x 150mm matte tile at P3 and a non-rectified edge. Plastra brings hand-trowelled plaster into porcelain, with a smooth white matte listing in 450 x 900mm and a 22.5 x 900mm plank, at R10.
The tumbled limestone subway tile is the one natural stone on the page. It is a white natural limestone with a tumbled finish in 50 x 200mm. Its own spec says use on floors and in wet areas may require more care and regular sealing. The tumbled natural stone tiles page covers the range.
Marble looks and mosaics
The marble look tiles page covers the family. Perisher White Marble is described as an alternative to Statuario marble, which the listing calls one of Italy's most desired and high maintenance marbles, with a glazed porcelain surface that offers a stress free alternative to natural stone. Its polished rectified listings are 300 x 600mm, 600 x 600mm and 600 x 1200mm, and the 300 x 300mm is a matt tile.
Kings Marble Carrara is a ceramic marble look tile with a matt cushioned edge in 300 x 300mm and 450 x 450mm, and the 300 x 300mm listing prints P2. Matrix pairs richly veined marble looks with geometric patterns in a 200 x 200mm matte porcelain at P3, suitable for flooring in dry areas. Cottesloe is a series of honed marble mosaics, and the Carrara White listing is a 23mm penny round. A marble mosaic carries many grout lines by design and its listing prints substantial variation in colour and texture.
Small format, glazed and brick looks
Meander brings classic fish scale curves in a 200 x 200mm matte porcelain at P3, and its copy lists kitchens, bathrooms and laundries as rooms it suits. Sicily is an Italian made, hand-crafted, gloss glazed range in 100 x 100mm and 50 x 150mm, with a wear rating of 3, so it suits light traffic floors and feature areas better than a main hallway. Eton is a brick look in 60 x 250mm, matte, at R10/P3, with a wear rating of 5 and an application line that covers walls, floors and exterior cladding.
Small formats put more grout lines on a floor than large panels do. A Brisbane retailer notes that large white tiles give a cleaner, more continuous look, and a Brisbane guide adds that rectangles laid in herringbone bring interest without losing a classic feel.
Materials on this page
A Brisbane retailer's white page lists ceramic, porcelain and stone as the three material families, and all three appear here. Porcelain is the bulk of the page: terrazzo, travertine, limestone and stone looks, plus Meander, Matrix, Sicily and Eton. The Kings Marble Carrara listing title names it a ceramic tile, though the Kings Marble 300 x 300mm spec line prints Porcelain as the material, so check the line on the listing you pick. Cottesloe is real marble, honed, and the tumbled subway is natural limestone.
The material matters on a floor because it sets the care. The porcelain listings print Easy to clean. The natural stone listing prints care consideration and sealing. The marble mosaic is a real stone with substantial variation in colour and texture, which its own listing calls a unique appearance, and that variation is the point of choosing it.
Room by room
A national retailer lists kitchens, bathrooms, living areas, bedrooms, dining areas and laundries as the rooms white tile suits. On the listings here, the rooms line up with the ratings. A bathroom or laundry floor points to the P4 and P5 listings, or to the P3 listings that print a wet area recommendation, such as Avedon and Cairnwell. A living room or bedroom floor can take the honed and lappato listings, since light traffic is what those lines describe. A hallway or kitchen floor points to the wear 4 and wear 5 listings, and a covered outdoor area points to the listings that print outdoors in the area line.
The bathroom tiles, kitchen tiles and outdoor tiles pages hold the wider lists for each room, and each listing here still needs its own slip, wear and area lines checked.
Choosing a size and layout
Each of the size pages covers one format across every colour: 300 x 300mm, 450 x 450mm, 600 x 600mm, 300 x 600mm and 600 x 1200mm. A Perth retailer notes that slim kit kat tiles laid vertically make a space feel taller, which is the same logic behind a long rectangle on a floor.
Rectified listings print a recommended grout gap of 1.5mm to 3mm. Non-rectified and cushioned edge tiles, such as Southside's non-rectified listings, Burleigh and Soluna, have a softer edge and need a wider joint. The Perisher listings add that sharp edge tiles are accurately produced, allowing for fine grout lines of 3mm or less.
Grout colour matters on a white floor. A white or light grey joint keeps the surface calm, and a darker joint draws the layout. Both choices are visual, so a sample laid out with grout is worth seeing first.
Pairing white floors with the rest of the room
A Brisbane retailer says white pairs with natural wood finishes, which add texture and a calming vibe, and a Perth retailer pairs white tile with white profiled cabinetry and wooden benchtops. For a kitchen, the kitchen tiles page covers the use. For contrast, black tiles and grey tiles are the colours most often paired with white, and both sit one link away.
Texture adds depth where colour does not. A Brisbane retailer notes that textured white tiles add depth without introducing colour, and the grip listings here (Bianco Josie, Pearl Ivy, Tilly Tundra and Valerie) are the textured end of the range. Smoother listings such as Plastra, Island and Auralis are the quiet end.
Cleaning and care
Most porcelain listings on this page print Easy to clean. A matte white hides minor marks better than a gloss one, per a Brisbane retailer, and a textured grip surface holds a little more dust than a smooth one. The tumbled limestone listing requires sealing, per its own spec, and the porcelain listings print no sealing requirement.
Many listings on this page suggest pairing tiles with underfloor heating for a warmer, drier floor, and recommend ordering extra tiles over the measured area for cuts and waste. Both lines appear on the listings themselves.
Samples and ordering
White is not one colour, and a sample shows the difference between Bianco, Off White, Ivory and Pearl in the room's own light. The range pages linked above show each collection's other colours and formats. The white tiles page shows wall and floor tiles in the colour together.
