The Cairnwell range at a glance
Cairnwell is a modern stone look porcelain with soft tonal variation and subtle veining, understated enough to suit a wide range of interiors but with enough character to hold its own. It comes in two colours, White and Taupe, and two sizes, 300 x 600mm and 600 x 600mm, 9mm thick with a rectified edge. It is one range with two finishes, made to carry one look from the entry through to the exterior.
Those two finishes split the range. The indoor tiles are a smooth matte at P3, in both sizes and both colours. The outdoor tiles are a grip finish at P5, in 600 x 600mm only, in both colours. Both are rated to AS 4586-2013. The decision on this page is mostly a choice between the two, so each gets its own section below.
Related pages cover the wider groups. The tiles hub links every category on the site. Avedon is the closest range in format and finish, and Myra and Ardenne are the other stone and travertine looks nearby. For rooms and uses, bathroom tiles, floor tiles and outdoor tiles hold the wider lists.
Porcelain that looks like stone
The category is simple to explain. A look-alike porcelain is printed and fired to copy the veining and texture of stone. It is near impervious to water, stains and general wear, and a regular mop is enough to care for it. Take the look-alike if you want a similar appearance with easier maintenance, greater consistency and better resistance to moisture and everyday wear.
Cairnwell is on that side of the choice. Every tile is porcelain, easy to clean with standard household products, with no sealing required, and a non-porous surface. A general point applies to the outdoor tiles: porous materials such as natural stone, concrete and terrazzo need sealing, and porcelain rated for outdoor use is the most durable and lowest maintenance option. Cairnwell does not carry the sealing requirement that the real stone does.
If real stone is the aim, the natural stone tiles page holds it. Cairnwell is the porcelain version of that look.
White and Taupe
The two colours are White and Taupe. White is the lighter base. Taupe sits among the warm neutrals, with greige and sand. Warm neutrals give warmth without a strong colour, pairing with timber, stone and softer greys. Undertones such as creamy, mushroom, honeyed and greige each change a room, so hold a sample against the fixed finishes: cabinetry, stone and paint.
Stone effect tiles pair with wood, wicker and rattan. In practice that suggests timber vanities, woven baskets and linen alongside either colour, with Taupe suiting rooms that lean warm and White suiting rooms that want a lighter base. The white tiles page and the beige tiles page show the colour families across every use, and grey tiles shows the cooler neighbours.
Grey sits between warm and cool palettes, and Taupe does the same job here. The two colours carry through both finishes, so a decision on colour holds for the indoor and outdoor tile.
Is a stone look right in a shower or wet room?
People searching for limestone tile often ask whether it works in a shower. Real limestone is porous, wants sealing on installation and again later, and is softer. A look-alike porcelain has a near impervious body, and matte and textured finishes cope with wet conditions better than polished ones, with slip rating mattering in bathrooms and outdoors.
Cairnwell's position is clear. The P3 matte tile is rated to AS 4586-2013 and recommended for indoor wet areas including bathrooms, kitchens and laundries. The P5 grip tile is suitable for outdoor areas, pool surrounds and high wet risk applications. The material is porcelain, 9mm thick, with no sealing required and a non-porous surface. As with any tile, a licensed tiler is the person to confirm a specific shower floor or recess.
The indoor tile: P3 matte
The indoor tiles have a matte finish with a smooth and non-reflective surface. The slip line reads P3, moderate slip risk, rated to AS 4586-2013, and recommended for indoor wet areas including bathrooms, kitchens and laundries. The area line reads Indoors, wet and dry areas, and the application line reads Walls and Floors. The wear line reads 3, suitable for floors in light traffic areas with normal shoes, with a medium risk of scratching.
The wear line is the one to read for a floor. Light traffic fits a bathroom, a bedroom or a laundry. A busy entry or a kitchen floor sits better with a wear 4 tile, and in this range that is the P5 tile, if its grip surface suits the room. The 300 x 600mm tile also works as a wall tile, and both indoor sizes are printed for walls and floors. The 300 x 600mm tiles and 600 x 600mm tiles pages show each format across every range.
Pair the tiles with underfloor heating for a warmer, drier, mould-resistant bathroom, and order extra tiles over the exact quantity for breaks and offcuts. Colour, size and texture may vary from batch to batch, and the appearance line reads V3, moderate variation in colour and texture.
The outdoor tile: P5 grip
The outdoor tiles have a grip finish with a textured grip surface. The slip line reads P5, very low slip risk, rated to AS 4586-2013, and suitable for outdoor areas, pool surrounds and high wet risk applications. The application line reads Walls, Floors and Outdoor Areas, and the area line reads Indoors and outdoors, including uncovered outdoor areas. The wear line reads 4, suitable for floors in normal use areas with low risk of scratching.
Porcelain is usually preferred for alfresco and patio areas because it does not absorb moisture and handles temperature changes, with a slight texture for grip, especially in spots exposed to rain. For pool surrounds, traction and water resistance come first, and lighter colours are often chosen to reduce heat underfoot, which makes White the lighter choice in this range. Porcelain is the top outdoor choice for most homeowners because it is non-porous and weather resistant, and a textured or matte surface gives grip.
The outdoor tile comes in 600 x 600mm only. A larger alfresco floor is therefore a 600 x 600mm layout, and the outdoor tiles page lists tiles made for outdoor use across every look.
Reading P3 and P5
The scale is simple. P ratings come from a pendulum test on a wet, flat surface. P1 is low slip resistance, P2 and P3 are moderate, P4 is high and P5 is very high. R ratings come from a separate oil ramp test, from R9 for low resistance to R12 and R13 for very high. Cairnwell prints P ratings on both finishes.
The highest number is not always the right one. A heavily textured surface chosen to reach a very high rating takes more effort to clean, because the texture holds dirt. Choose a rating for the space and check current Australian Standards and CSIRO guidance for a specific project. That is the reason for two finishes. The P3 matte is smooth and easy to wipe indoors, and the P5 grip gives the traction that wet outdoor areas need. In/out surfaces feel smoother and clean more easily while adding grip when wet, which is the balance a matte tile offers inside.
Choosing a size
The indoor tile comes in two sizes, and the outdoor tile in one. A larger tile means fewer joints, and large format tiles mean fewer grout lines for a cleaner look. The 300 x 600mm tile gives more flexibility in a tighter bathroom or as a wall tile. All the tiles have a rectified edge, which allows a fine grout line, and the usual recommended gap for rectified tiles is 1.5mm to 3mm.
With two neutral colours, grout changes the look more than any other choice. A tone close to the tile makes the stone look continuous, and a contrasting grout defines each tile. For Taupe: a tone close to the tile reads as continuous, a warm light grey is subtle, and a cool grey can make a warm tile look more yellow.
Where each tile goes
On the printed lines, the rooms line up. A bathroom, kitchen or laundry floor suits the P3 tile, within the light traffic limit of wear 3. A covered or uncovered patio, a path or a pool surround suits the P5 tile. A wall, indoors or out, is covered by the application lines, which read Walls and Floors indoors and Walls, Floors and Outdoor Areas outdoors. Wet areas get the rating the tile carries, and a licensed tiler can confirm it for a specific project.
Tiles for balconies need good drainage and a textured surface, and tiles in outdoor kitchens should resist stains and be simple to wipe down. Both are the outdoor tile's job here.
Cleaning and care
Cairnwell is easy to clean with standard household products, needs no sealing and has a non-porous surface. A regular mop is enough for a look-alike porcelain. Outdoor tiles usually need only rinsing and mild detergent, and matte and textured finishes hide dust and weather residue. Wash garden debris, motor oils and animal droppings off promptly, since left to sit they can stain. A textured grip surface needs a brush or mop to lift dust from its texture.
A worked example: a laundry floor of 2.4m by 1.8m is 4.32 square metres. A 600 x 600mm tile covers 0.36 square metres, so the floor takes 12 whole tiles, and with 15 percent for cuts and breaks the order is 14. A 300 x 600mm tile covers 0.18 square metres, so the same floor takes 24, and 28 with the allowance. A patio of 3.6m by 3m is 10.8 square metres, which takes 30 whole 600 x 600mm tiles and 35 with the allowance.
Samples and ordering
A stone look changes with its light, so a sample laid in the room settles the colour. Order extra over the measured area for cuts and breaks, and keep spares for later repairs. The tiles hub shows every other range on the site.