Telbix Lighting

A well-designed bathroom lighting scheme uses three types: ambient lighting (general illumination, such as a ceiling light or downlights), task lighting (focused light for grooming, typically beside or above the mirror), and accent lighting (decorative LED strips, feature pendants, or night lights). Relying on a single ceiling light is the most common lighting mistake in Australian bathrooms, it creates unflattering shadows on the face and leaves the room feeling flat.

In Australia, bathroom lighting must comply with AS/NZS 3000 wiring standards, which require specific IP (Ingress Protection) ratings based on the zone within the bathroom. Zone 1 (inside the shower or bath area) requires IP65 rated fixtures minimum. Zone 2 (within 0.6m of a bath or shower) requires IP44 minimum. Outside these zones, standard IP20 rated lights can be used. Always check the IP rating of any light fitting before installing it in or near a wet area.

For bathroom tasks like applying makeup or shaving, a colour temperature of 3000K–4000K (warm white to neutral white) is ideal as it renders skin tones naturally and accurately. Colour temperatures above 5000K (cool daylight) can appear harsh and clinical. If you want a relaxing, spa-like ambience, lean toward 2700K–3000K for a warm, flattering glow.

Yes, LED lighting is the standard choice for Australian bathrooms. LED lights offer significantly lower energy consumption, longer lifespan (up to 25,000 hours), and are available in a full range of colour temperatures and dimmer-compatible options. Look for LED lights from reputable brands like Eglo, Brilliant, and Martec (available at The Blue Space) that carry appropriate IP ratings for your intended installation zone.

In Australia, all electrical work including the installation of new light fittings must be carried out by a licensed electrician. Replacing a like-for-like fitting in the same location may be a grey area in some states, but for any new circuits, new switch positions, or wet area installations, a licensed electrician is required by law. Always obtain the appropriate Certificate of Compliance from your electrician after installation.

Telbix is an established supplier in the Australian lighting market, offering a broad range across indoor and outdoor fittings, from pendants and wall lights to exterior and functional lighting. Whether a specific fitting is "good" for your project depends on matching the right product to the room, IP rating and style you need, the same due diligence worth applying to any lighting brand rather than assuming brand name alone guarantees fit for purpose.

Telbix operates and supplies into the Australian lighting market and designs its range with local conditions and compliance requirements in mind, including AS/NZS wiring and IP rating standards relevant to Australian homes. As with most lighting brands sold here, manufacturing may occur overseas while distribution and local compliance are handled for the Australian market.

There isn't a single "best" brand, the right choice depends on the fitting type, budget and style you need for a specific room. What matters more than brand name is confirming the fitting carries the correct IP rating for its installation zone, complies with AS/NZS 3000 wiring standards, and suits the colour temperature and style of the room it's going into. Telbix is one of several reputable brands worth comparing alongside others stocked at The Blue Space for your specific project.

Telbix's range typically spans both indoor lighting, such as pendants, wall lights and downlights, and outdoor and exterior-rated fittings for entryways, alfresco areas and gardens. This breadth makes it a reasonable starting point when you want a consistent design language carried from inside the home through to an outdoor entertaining area, rather than mixing unrelated brands for each zone.

As with any light fitting, installation must be carried out by a licensed electrician in Australia, regardless of brand. The electrician will confirm the fitting's IP rating suits its intended location (especially important for bathroom or outdoor installs), wire it correctly, and issue a Certificate of Compliance once finished. Don't attempt to install or rewire a new fitting yourself, even a straightforward-looking pendant swap falls under licensed electrical work if it involves altering wiring.

Start with the room's function and required IP rating, then narrow by style. A bathroom or outdoor space limits your choice to fittings with an appropriate damp or wet rating first, style comes second. For a living area or bedroom with no moisture exposure, you have more freedom to choose based on finish and design alone. If you're also lighting a space with a timber-toned interior, it's worth comparing against timber lights for a warmer-toned option outside the Telbix range.