Skip to content
Launching soon in NZ
Launching soon in NZ

Telbix Arvin Vanity Wall Light

0 Items

Whoops, there are none available in your area

View all products

Related Searches

Telbix Arvin vanity wall light

Arvin is Telbix's vanity wall light range, designed specifically for mounting beside or above a bathroom vanity mirror, rather than general room lighting.

What makes a vanity wall light different

Vanity wall lights like Arvin are built to light a face evenly for tasks like shaving or applying makeup, which means even, forward-facing light rather than the downward or ambient light a standard wall or ceiling fitting gives. Seven Arvin fittings are available across different sizes and finishes.

Positioning a vanity wall light

For the most even light on your face, vanity wall lights generally work best mounted at eye level, either as a single fitting above the mirror or as a pair on either side of it. A single central fitting above the mirror is simpler to install but can cast slight shadows under the chin; side-mounted pairs give more even coverage.

Water safety for bathroom lighting

Any light fitting installed near a vanity, especially close to a basin or within a bathroom's wet zones, needs an IP rating appropriate to that location under Australian wiring standards. Check the specific Arvin product listing for its IP rating and confirm placement with a licensed electrician if you're unsure which zone it falls into.

Common Telbix Arvin questions

Q: Is the Arvin light suitable for bathroom use?
A: Check the specific product's IP rating before installing near a basin or in a bathroom's wet zones, and confirm placement with a licensed electrician if unsure.

Q: Should I mount one Arvin light or a pair either side of the mirror?
A: A pair mounted on either side generally gives more even facial lighting than a single fitting above the mirror, which can cast shadows under the chin.

Q: What colour temperature suits a vanity light?
A: A neutral to warm white (around 3000K-4000K) is generally recommended for vanity lighting, since it renders skin tone more naturally than a very cool white light.

Q: Does Arvin come in different finishes?
A: The Blue Space currently lists 7 Arvin products across different finishes and sizes; check the collection page for current options.

Q: Do vanity wall lights need a licensed electrician to install?
A: Yes, hardwired wall lighting near a bathroom's wet zones should be installed by a licensed electrician familiar with Australian wiring safety standards for those zones.

---

Frequently Asked Questions

What types of lighting should a bathroom have?

A well-designed bathroom lighting scheme uses three types: ambient lighting (general illumination, such as a ceiling light or downlights), task lighting (focused light for grooming, typically beside or above the mirror), and accent lighting (decorative LED strips, feature pendants, or night lights). Relying on a single ceiling light is the most common lighting mistake in Australian bathrooms, it creates unflattering shadows on the face and leaves the room feeling flat.

What IP rating do bathroom lights need in Australia?

In Australia, bathroom lighting must comply with AS/NZS 3000 wiring standards, which require specific IP (Ingress Protection) ratings based on the zone within the bathroom. Zone 1 (inside the shower or bath area) requires IP65 rated fixtures minimum. Zone 2 (within 0.6m of a bath or shower) requires IP44 minimum. Outside these zones, standard IP20 rated lights can be used. Always check the IP rating of any light fitting before installing it in or near a wet area.

What colour temperature is best for bathroom lighting?

For bathroom tasks like applying makeup or shaving, a colour temperature of 3000K–4000K (warm white to neutral white) is ideal as it renders skin tones naturally and accurately. Colour temperatures above 5000K (cool daylight) can appear harsh and clinical. If you want a relaxing, spa-like ambience, lean toward 2700K–3000K for a warm, flattering glow.

Are LED lights suitable for bathroom use?

Yes, LED lighting is the standard choice for Australian bathrooms. LED lights offer significantly lower energy consumption, longer lifespan (up to 25,000 hours), and are available in a full range of colour temperatures and dimmer-compatible options. Look for LED lights from reputable brands like Eglo, Brilliant, and Martec (available at The Blue Space) that carry appropriate IP ratings for your intended installation zone.

Can I install bathroom lighting myself?

In Australia, all electrical work including the installation of new light fittings must be carried out by a licensed electrician. Replacing a like-for-like fitting in the same location may be a grey area in some states, but for any new circuits, new switch positions, or wet area installations, a licensed electrician is required by law. Always obtain the appropriate Certificate of Compliance from your electrician after installation.

select-your-country

Where Are You Shopping From?

Switch to your local store for faster shipping and local deals.

Select your country