Skip to content

Ceiling fan no light

0 Items

Whoops, there are none available in your area

View all products

Ceiling fans without lights buying guide


Many ceiling fans come in two versions, one with a light and one without, and the version without is often the better choice. A fan with no light is simpler and sits lower, and it is easier to live with where the room already has good lighting. This guide explains when to skip the light, what you give up, whether a light can be added later, and which ranges here come without one, with their specifications.

When to choose a fan without a light

The case is straightforward. Fans without lights suit rooms that already have lamps, pendants or recessed lighting, and open floor plans with chandeliers, wall sconces or flush mounts, where a fan can be added without dimming those lights. They also suit patios and sunrooms. A fan light is typically best for ambient illumination, so a room that needs task lighting may want separate fittings anyway. If the ceiling is already lit the way you like, a fan with no light leaves it that way.

Avoiding the strobe effect

A fan beside downlights can produce a strobe effect, because the blades pass in front of the light as they turn. Keep the blades clear of downlights. If your downlights are fixed and close to where the fan will hang, a fan with no light is no better: the downlights are the cause. In that case, move the fan if you can, or choose a position that keeps the blades away from the downlight beams. A fan without a light is the right choice when the room's lighting is where you want it and the fan is placed to avoid it.

Headroom, and how a light changes it

A light adds height below the fan. A hugger fan can run 200mm from ceiling to base without a light and 240mm with one, and the same pattern shows across the range: the Martec Fresno is 205mm and 230mm, and the Martec Metro 210mm and 220mm. Blades must hang at least 2.1 metres above the floor, so on a low ceiling a fan without a light can clear the minimum when one with a light would not. Low-profile fans without lights suit rooms with low ceilings, and flush-mount fans suit low ceilings too, although their blades sit closer to the ceiling and may move less air than fans on a rod. See low profile fans.

Can you get a ceiling fan without a light, and can you add one later?

Yes to the first, and sometimes to the second. This collection is the no-light versions of the fans on the site. Some fans can have a light added later, but many models are sold as light or no-light versions only, and proprietary LED kits usually cannot take standard bulbs. So the safest rule is to choose the version you want. The Eglo Waikiki range can be customised with a separately sold remote kit and light kit, and the Martec Precision has an optional light kit. Most other ranges are sold as a light version or a no-light version, and the product name shows which. If you may want a light later, look for a light add-on before you buy.

Do ceiling fans need wiring?

Yes. A ceiling fan is a fixed electrical appliance, and hard-wired fans must be installed by a licensed electrician. Fitting a fan with a wall switch without an electrician's licence is illegal. A fan without a light is not exempt: it still connects to the ceiling circuit, and the electrician still checks that the ceiling or beam can carry it.

Choosing the size for the room

Living rooms, family areas and master bedrooms need blades of at least 132cm for enough airflow. Kitchens and dining rooms can use a somewhat smaller fan, a fan works best centred in the room, and an elongated room suits several fans. A 52 inch (132cm) fan is the standard size, 48 inch (122cm) suits smaller rooms and over 54 inch (137cm) suits larger square rooms of about 5 by 5 metres or more. By area, up to 4 to 6 square metres takes 36 to 48 inch, 6 to 12 square metres takes 48 to 52 inch, 12 to 20 square metres takes 52 to 60 inch, and over 20 square metres takes 60 inch and larger.

Motor, speeds and wattage

The two motor types differ in practice: AC fans run at 50 to 80 watts with three speeds, and DC fans at 15 to 55 watts with five to seven speeds. DC is now the most common type, costs more to buy, uses less electricity and offers up to seven speeds, while AC motors are older and generally have three. Most of the fans here are DC. See DC motor fans for the full comparison.

The ranges that come without a light

These are the specifications of the no-light versions.

  • Eglo: Surf in white, black and woodgrain with ABS or aluminium blades and a drop of 192mm to 309mm; Miami, DC, up to 16,412 cubic metres an hour, for indoor and covered outdoor use; Iluka, a hugger of 252mm in ABS; Seacliff, flat ceilings only with a drop of 234mm; Stradbroke, DC, 28 watts, drop 318mm; Noosa, 40 to 60 inch with 8 degrees of pitch; Cabarita, 50 inch; Kurrawa, IP55 rated and flat ceilings only; Currumbin and Waikiki, steel and plywood blades for indoor use.
  • Martec: Albatross II, 1650mm, 1830mm and 2130mm, 55 watts, aluminium blades, flat ceilings only; Viper and Seaforth, 33 watts; Elite, 36 watts; Scorpion, 34 watts, from 1066mm; Triumph and Cordoba, 28 watts; Riviera, Hampton, Impact, Esprit and Quantum, between 33 and 40 watts; Fresno and Metro, close-to-ceiling fans for flat ceilings; Lifestyle and Link, with aluminium or steel and plywood blades.
  • Fanco: Horizon High Airflow, 52 and 64 inch, up to 19,010 cubic metres an hour; Infinity, 48 and 54 inch; Eco Silent Pro, 48, 52 and 56 inch; Flow, 52 inch, flat ceilings only; Breeze, AC, 48 and 52 inch, with a wall control; Wynd V3 and the EarthFirst fans, with solid timber blades.

For the fans in a colour, see white ceiling fans and black ceiling fans, and for small rooms small fans.

Planning the lighting around a fan without a light

If the fan carries no light, the room's lighting has to do the work, and the fan's position should be planned with it. A fan near downlights can strobe, so place the fan so its blades do not pass in front of them. Use a separate control, whether a remote, an app or a wall switch, so that lights and fan are adjusted independently. For the lights themselves, warm white of about 2700K to 3000K suits bedrooms and lounges and neutral white of about 4000K suits kitchens, home offices and multipurpose rooms, and warm light is the better choice for sleeping rooms.

Blades and finishes

Without a light, the blades and the housing carry the design. The no-light fans here come in white, black and woodgrain, and in natural timber and several metal finishes: brushed nickel, brass, bronze and gunmetal. Blades are ABS plastic or aluminium on most, with plywood and solid timber on a few. The solid timber blades on the Fanco EarthFirst and Sanctuary fans are FSC certified. Timber blades suit indoor rooms and can warp in moisture, and many blades that look like wood are plastic, so the blade line on the specification is the reliable guide. No blade material has been shown to improve airflow.

Ceiling height and pitch on a no-light fan

The drop figure still matters. Each fan has a drop or overall height and a maximum canopy pitch. Several are for flat ceilings only, including the Martec Albatross II, Fresno and Metro, the Eglo Seacliff, Kurrawa and Currumbin and the Fanco Flow. Others take 8, 10, 12, 13 or 15 degrees, and the Eglo Miami takes up to 38 degrees with an angle canopy sold separately. Fans generally handle about 10 degrees of tilt without a kit, 20 to 40 degrees usually need a raked ceiling kit and a longer rod, and low profile or no-rod fans may not suit angled ceilings. See ceiling fans for high ceilings and ceiling fans for ceilings under 2.7m.

Controls and reverse mode

Remote control is standard on the DC fans, and some add a wall control. The Fanco Breeze uses a wall control, and the Eglo Waikiki is customised with a separately sold remote kit. Reverse mode runs the fan clockwise at low speed so it pulls air upward and moves warm air from the ceiling without a direct draught, which helps in winter. Wi-Fi control is on several Martec ranges; see smart ceiling fans.

Keeping a fan clean

A fan without a light has no shade or globe to clean, which is one of its small advantages. Dust the blades and housing two or three times a year, or wipe them with a microfibre cloth every few weeks. A fan that wobbles is louder and less efficient, and a balance kit corrects it. Have the fan inspected early if it hums, wobbles or runs slowly.

When a light is the better choice

A fan with a light is the better choice where the fan replaces the main ceiling fitting, where there is no other ceiling light, or where you want one fitting and one ceiling box. Universal fittings take standard E27 or B22 bulbs, and a separate control lets you change the light without changing the fan speed. See ceiling fans with lights for output, colour temperature and the specifications of each range.

Room by room

  • A lounge or living room with a lit ceiling: a 52 inch fan or larger, centred, with a remote.
  • A bedroom with a separate light: a 48 or 52 inch DC fan with a low first speed and a sleep or timer mode.
  • A low ceiling: a close-fitting fan without a light, checking the height on the specification.
  • A covered patio: a fan for covered outdoor use, such as the Eglo Miami or Noosa.
  • A room with downlights close by: keep the fan clear of the downlight beams.

Related collections

For every style see ceiling fans. By brand, Martec ceiling fans and Fanco ceiling fans.

Frequently Asked Questions

Should I choose a DC or AC motor ceiling fan?

This choice comes down to what you value most: upfront cost or long-term efficiency. AC motor fans are the traditional, more affordable option and remain reliable workhorses. DC motor fans, by contrast, use up to 70% less energy, run quieter, and offer finer speed control, an investment that tends to reward those who value comfort and lower running costs over the years ahead.

What size ceiling fan do I need for my room?

The right fan size is determined by the dimensions of the room, not personal preference alone. As a general guide, rooms up to 12m² suit a blade span of 900–1200mm, rooms up to 20m² call for 1200–1400mm, and larger open-plan living areas often benefit from 1400mm or above. Ceiling height also plays its part, for ceilings under 2.4m, a low-profile or hugger-style fan is the wiser choice to maintain safe clearance while still delivering effective airflow.

Should my ceiling fan spin clockwise or anticlockwise?

There is wisdom in the seasons here. In summer, fans should rotate anticlockwise (when viewed from below) to push air straight down, creating a cooling breeze. In winter, reversing the fan to spin clockwise draws warm air that naturally rises back down into the room, helping redistribute heat more evenly.

Are outdoor ceiling fans different from indoor ones?

They are, and the distinction matters. Outdoor fans are built to endure the elements, rated as either "damp" (suitable for covered, sheltered areas like alfresco spaces) or "wet" (able to withstand direct rain and moisture). Installing an indoor-rated fan outdoors risks premature wear and safety issues, so it's worth confirming the rating aligns with where the fan will ultimately live.