Skip to content

White Outdoor Tiles

0 Items

Whoops, there are none available in your area

View all products

White Outdoor Tiles Buying Guide


White outdoor tiles are light-toned porcelain tiles with grip surfaces for patios, pool surrounds, alfresco areas and courtyards. This collection includes External tiles from the Southside, Tuscan, Roccia and Auralis ranges, in terrazzo, travertine and stone looks. White suits coastal, Mediterranean and contemporary homes where you want a bright, cool-feeling outdoor floor.

Are white tiles a good choice outdoors?

Yes, especially in full sun. Light colours reflect heat, so white tiles stay cooler underfoot than dark tiles around a pool or on an exposed patio. The trade-off is that white shows leaf stains, soil and water marks more than a mid tone. Grip and matte surfaces, like every tile here, hide marks better than gloss, and a quick hose-down keeps them looking fresh.

What slip rating do white outdoor tiles have?

The Southside, Tuscan and Auralis tiles are rated P5, the highest on the AS 4586 wet pendulum scale, and the Roccia White is rated P4. Both suit exposed outdoor floors, and P5 is the stronger choice around pools and on wet, sloping areas. All four have a grip finish with a flat or low texture, which balances traction with easy cleaning.

Which white outdoor tile should I choose?

Choose by look and format. Southside White is a terrazzo look, 600 x 600mm and 7.5mm thick, rated for outdoor floors. Tuscan White is a travertine look in 600 x 600mm, 9.5mm thick, with moderate variation from tile to tile. Roccia White is a raw-stone look in large 600 x 1200mm, 9mm thick. Auralis Off White is a soft honed stone look in 600 x 600mm, 10mm thick, and reads warmer than a bright white.

Do white porcelain outdoor tiles need sealing?

No. Porcelain is dense and non-porous, so it doesn't absorb water or need a surface sealer, unlike real travertine, terrazzo or concrete. That's the main reason to choose a porcelain stone look outdoors: you get the look of travertine or terrazzo without the upkeep. The grout is the part that may need attention over time.

What size white outdoor tile works best?

Large formats give a calmer, more open look with fewer grout lines. The Roccia 600 x 1200mm suits large patios and pool decks, while 600 x 600mm is the versatile choice for most alfresco areas and courtyards. All four tiles have rectified edges, which allow a fine 1.5mm to 3mm joint.

How do I keep white outdoor tiles clean?

Sweep regularly, rinse with water and wash with a mild, pH-neutral detergent. Clear leaves, garden debris, oil and animal droppings promptly, as they can stain a pale surface if left. Use an outdoor-rated grout; a soft grey or warm white grout hides dirt better than bright white. After installation, a thorough clean removes grout haze from textured surfaces.

Completing the room

Browse every colour in outdoor tiles, compare grey and beige outdoor tiles, see the full Tuscan travertine-look range, or carry the look indoors with white floor tiles at The Blue Space.

Frequently Asked Questions

What is the best tile finish for a bathroom, matte or gloss?

Matte tiles are trending strongly in Australian bathrooms for their contemporary look and practical ability to hide water spots and fingerprints. Gloss tiles reflect light and can make a bathroom feel brighter and larger, but show water marks and smudges more readily. For shower recesses and wet floors, matte or satin finishes with good slip resistance are generally preferred.

How many tiles do I need to order for my bathroom?

Measure your total wall and floor surface area in square metres, then add a 10–15% wastage allowance for cuts, breakages, and future repairs. For complex layouts with diagonal patterns or feature inserts, increase the wastage to 15–20%. Always order all tiles from the same batch (check the shade lot/batch number) as tiles from different batches can vary slightly in colour.

How do I choose between floor tiles and wall tiles?

Floor tiles must have an adequate slip resistance rating (P3 minimum for domestic bathrooms) and be durable enough for foot traffic. Wall tiles can be glazed ceramic, porcelain, or natural stone, they don't need to carry load but should be moisture-resistant. Many Australian renovators choose matching or coordinating floor and wall tiles from the same range for a cohesive look.

What tile size is best for a small bathroom in Australia?

For small bathrooms, tiles between 300 x 300mm and 600 x 300mm often work well on both walls and floors. Smaller mosaic or subway tiles (75 x 150mm or 100 x 200mm) are a classic choice for shower walls. While large format tiles can also work in small spaces, they require a very level substrate and expert installation. Avoid tiles that are too small on floors (like 50 x 50mm mosaics) in large quantities, as the increased grout lines can make a space feel busier.

How do I incorporate feature tiles without over-designing the bathroom?

The most effective approach is to choose one feature zone and use your feature tile there, a full-height shower wall, the bath surround wall, or the vanity splashback area. Keep the remaining surfaces in a neutral or complementary field tile. This creates impact without visual clutter. Limit your palette to two or three complementary materials for a cohesive result.

What is the slip resistance rating I need for bathroom floor tiles?

Australian Standards (AS 4586) require bathroom floor tiles to have a minimum slip resistance rating of P3 for domestic bathrooms and P4 or P5 for wet areas like shower recesses. The Blue Space recommends checking the slip resistance rating of any tile you're considering for floor use, particularly in the shower. Matte and textured porcelain tiles generally offer better slip resistance than polished or gloss finishes.

What is the difference between ceramic and porcelain tiles?

Porcelain tiles are fired at higher temperatures and are denser, less porous, and harder than ceramic tiles. This makes porcelain more water-resistant, more durable, and suitable for both indoor and outdoor applications, including high-traffic floors. Ceramic tiles are lighter and easier to cut, making them a practical choice for bathroom walls and splashbacks. For bathroom floors and wet areas, porcelain is generally the preferred option in Australia.