Filters
Meir Spouts
0 products
There are no products matching your search
View all productsMeir spouts are standalone bath and basin outlets designed to pair with a wall mounted mixer, giving you a way to fit out a wall mounted tapware setup piece by piece rather than buying a single combined unit. The range covers both bath and basin applications across a solid spread of finishes, making it straightforward to match a spout to an existing Meir tap set or to build a bathroom around a chosen finish from the ground up.
How Meir spouts fit into a tapware setup
In a wall mounted arrangement, the mixer or tap handles sit on the wall and control temperature and flow, while the spout is a separate fixed outlet that directs water down into the bath or basin. Buying these as separate components means the spout can be chosen for the right reach and drop for your specific bath or vanity, and it can be replaced on its own later without needing to change the whole tap set.
Bath spouts and basin spouts
Meir's spout range includes options sized for both baths and basins. Bath spouts are built for a higher flow rate and a longer reach, which suits filling a tub at a reasonable pace, and are typically fitted alongside a wall mounted bath mixer. Basin spouts are shorter and lower flow, sitting above the basin bowl with a separate basin mixer nearby controlling the water. Reach is the detail to get right in both cases, since an undersized spout will not clear the bath or basin properly and an oversized one risks water splashing past the bowl.
Finish selection across the range
Meir spouts are available in a range of finishes that mirror the brand's broader tapware collections, from chrome through to brushed metallic tones and matt finishes for a more contemporary bathroom. Because a spout is usually installed alongside a separate mixer, shower or tap set, the practical approach is to lock in the finish for the whole bathroom first, then confirm that finish is available on the specific spout length or style you need.
Points to check before ordering
- Distance from the wall outlet to where the spout needs to sit over the bath or basin
- Spout drop height, particularly for freestanding baths positioned away from the wall
- Flow rate suited to bath filling versus basin use
- Finish consistency with the wall mixer, shower and other tapware in the room
Installation notes
Meir spouts are made for standard wall mounted rough in plumbing, so they are straightforward to specify for a new bathroom build. If you are retrofitting a wall mounted spout into an existing bathroom that currently has deck mounted tapware, the water supply will need to be relocated into the wall, which is a plumbing job best planned before tiling begins rather than after.
Buying tips
Work out whether you need a bath spout or a basin spout first, since the sizing and flow rate differ between the two, then measure the actual distance and drop required for your bath or vanity before choosing a length. From there, match the finish to the wall mixer and any other tapware being installed in the same room so the finished result reads as one considered scheme rather than mismatched pieces.
Frequently Asked Questions
What is a Meir spout used for?
A Meir spout is a standalone water outlet for a bath or basin, used together with a separate wall mounted mixer that controls temperature and flow. It allows the outlet and the mixer to be chosen independently, which is common in wall mounted tapware setups.
How do I choose between a bath spout and a basin spout?
Bath spouts have a longer reach and higher flow rate suited to filling a tub, while basin spouts are shorter and lower flow for sitting above a basin bowl. Meir's range includes both, so check the flow rate and intended use before selecting one for your bathroom.
How do I know what length spout I need?
Measure the distance from the wall outlet to where the water needs to fall into the bath or basin, along with the drop height, especially if you have a freestanding bath set away from the wall. Getting this measurement right before ordering avoids a spout that is too short to clear the bowl or too long and prone to splashing.
Do Meir spouts come in different finishes?
Yes, Meir spouts are available across a range of finishes including chrome, brushed metallic tones and matt options, in line with the brand's broader tapware collections. It is best to confirm your chosen finish is available on the specific spout style before finalising the rest of your tapware order.
Can I install a Meir spout myself?
Wall mounted spouts connect to plumbing that is roughed in through the wall, so installation is generally handled by a licensed plumber, particularly if you are converting from an existing deck mounted tap. It is worth confirming the wall outlet position and spout drop with your plumber before tiling is finished.
Sort by
