Phoenix 5000 Series Kitchen Sinks

The Phoenix 5000 Series kitchen sink range brings the same precision engineering Phoenix applies to its tapware into the kitchen, offering stainless steel undermount and topmount sinks sized for Australian kitchens. This page covers the full 5000 Series lineup including bowl configurations, dimensions, mounting options, and how to pair sinks with a compatible Phoenix tapware mixer.

What is the Phoenix 5000 Series?

The Phoenix 5000 Series is a dedicated kitchen sink range from Phoenix, an Australian-owned tapware and fixtures brand. The series uses heavy-gauge 304 stainless steel with a satin finish, and is designed to integrate cleanly with undermount cabinetry or drop into existing benchtop cutouts. Models span single bowl and double bowl configurations at standard Australian bench depths.

Single bowl or double bowl: which configuration suits your kitchen?

A single bowl Phoenix 5000 Series sink works well for kitchens handling large pots and pans, as the unbroken basin gives more usable depth. A double bowl configuration suits kitchens where simultaneous washing and rinsing is common, keeping dirty and clean loads separated without extra bench space. Bowl depth across the range typically sits between 180mm and 220mm.

For smaller kitchens or galley layouts where bench run is limited, a compact single bowl model in the 500mm to 600mm width range is the practical choice. Larger kitchens with 900mm or wider base cabinets can accommodate the double bowl models without compromising drain clearance.

Undermount vs topmount installation

Phoenix 5000 Series sinks are available in undermount and topmount formats. Undermount installation bonds the sink beneath the benchtop for a flush finish with no lip to collect debris, and it requires a solid surface benchtop such as stone, Corian or engineered composite. Topmount drop-in sinks suit laminate benchtops and are faster to install, as the rim clips over the cutout edge without adhesive or under-bench brackets.

Confirm the installation type before ordering, as the cutout dimensions and support requirements differ. Your kitchen sink installer or cabinetmaker can advise on which suits the existing or planned benchtop material.

Materials, finish and gauge

All 5000 Series sinks use 304-grade stainless steel, which provides corrosion resistance suited to Australian water conditions including areas with higher chlorine or mineral content. The satin brushed finish reduces visible scratches and fingerprints compared with a mirror-polished surface. Sheet gauge across the range is typically 1.0mm to 1.2mm, giving the basin walls enough rigidity to resist flexing under load.

The satin finish also coordinates with brushed stainless or brushed nickel tapware finishes, making it straightforward to match with a kitchen mixer tap in a similar tone without an exact finish match being required.

Waste and overflow fittings

Phoenix 5000 Series sinks are supplied with matching waste fittings in most configurations, including a 90mm basket strainer waste designed to the Australian standard drain size. Double bowl models include a dual waste kit with a centre overflow channel where applicable. Check whether the model you select includes a waste fitting or requires a separate purchase, as this varies across the range.

Standard 40mm outlet connection means compatibility with existing Australian drainage fittings, so retrofitting the sink into an existing kitchen typically does not require drain relocation.

Pairing with a kitchen mixer

Phoenix produces sink mixer taps designed to work dimensionally with the 5000 Series, with tap hole diameters at 35mm standard. Single taphole sinks suit a single-lever mixer, while models with two or three tapholes accommodate separate hot and cold taps or an integrated filtered water outlet. Browse the full kitchen sinks range or the Phoenix tapware collection to find compatible mixer options across the Cromford, Axia, and Vivid Slimline ranges.

Warranty and compliance

Phoenix backs its 5000 Series sinks with a manufacturer warranty covering defects in materials and workmanship. As an Australian brand, Phoenix products are manufactured to meet Australian and New Zealand plumbing standards, and the sinks are designed for compatibility with Australian cabinet sizing and drainage configurations. Retain your purchase receipt and product documentation for warranty claims.

Frequently Asked Questions