Caroma Contura II Toilet Suites
1 products
-
$406Caroma Contura II Invisi Series II Round DC Dual Flush Button Panel - Brushed Bronze
Experience the sleek and modern design of the Caroma Contura II Invisi Series II® Round DC Dual Flush Button Panel in Brushed Bronze, adding a touc...
View full detailsIn StockIn Stock SAIn Stock QLD
Caroma Contura II toilet suites bring the updated second-generation Contura range to the bathroom, combining Caroma's Cleanflush rimless flushing technology with a refined silhouette that suits contemporary and transitional spaces alike. All suites carry WELS certification and are designed and tested to Australian standards.
What sets the Contura II range apart from the original Contura
The Contura II is the updated generation of the original Contura range, with refinements to pan geometry, cistern proportions, and seat integration. The defining difference is the full adoption of Cleanflush technology across the toilet suite line. Cleanflush uses a fully rimless bowl with a directed water flow that flushes the entire interior surface, reducing residue build-up compared to rimmed designs.
Cleanflush technology: how it works
Cleanflush is Caroma's rimless flushing system in which water enters through a single directed inlet at the back of the bowl and travels around the full circumference rather than dripping from a concealed rim. The result is more consistent surface coverage per flush, with fewer areas that are missed by the water flow. All Contura II toilet suites use a 4.5/3 litre dual-flush cistern, which meets the WELS 4-star standard.
Configuration options: wall faced, back to wall, and close coupled
Contura II toilet suites are available in wall faced, back to wall, and close coupled configurations. Wall faced suites are the most common residential choice — the pan sits flush against the wall, concealing plumbing and making cleaning easier. Back to wall suites suit rough-in setups where the cistern is in-wall or concealed in a unit. Close coupled suites have a visible cistern sitting directly on the pan and are well suited to renovations where in-wall plumbing is not practical.
Dimensions and rough-in requirements
Most Contura II wall faced and back to wall suites have a standard 200mm rough-in (centre of outlet to finished wall), though specific models vary — confirm the rough-in measurement before ordering. Pan heights typically sit at 400–410mm rim height, within the standard comfort range for most adults. Seat-to-floor height with the seat fitted is approximately 430–440mm depending on the model. Overall projection from wall to front of pan is generally 670–680mm.
Seat and finish details
Contura II toilet suites are supplied with a soft-close seat as standard. Seats are manufactured from durable polypropylene in white to match the vitreous china pan. The suites are available in white only — Contura II does not extend to matte or coloured pan finishes. The cistern lid and seat are both replaceable as separate components if required.
Where Contura II fits in the Caroma range
Caroma positions Contura II as a mid-to-upper residential offering, sitting above the entry-level Opal and Liano lines and alongside Urbane II and Luna II in the premium tier. It suits bathrooms where a clean geometric profile matters and the Cleanflush feature is a priority. The Contura II toilet suite is part of a broader Contura II bathroom range that includes basins and tapware, making it straightforward to coordinate across fittings.
For the full Caroma range including other toilet suites, basins, and accessories, browse the Caroma hub. If you are comparing toilet suite options across brands, the full toilet suites collection covers all ranges stocked. For a complete bathroom fit-out using Contura II, pair with tapware and bathroom vanities to coordinate the space.
Frequently Asked Questions
What is the flush rating on Caroma Contura II toilet suites?
Caroma Contura II toilet suites use a 4.5/3 litre dual-flush cistern rated at WELS 4 stars. The 3-litre half-flush is the more commonly used cycle for liquid waste, while the 4.5-litre full flush handles solid waste. Both volumes meet the Australian standard for water efficiency in residential applications.
What rough-in measurement do Caroma Contura II toilet suites require?
Most Contura II wall faced and back to wall suites use a 200mm rough-in, measured from the centre of the outlet to the finished wall surface. Some models may differ, so check the specification sheet for the specific SKU before purchasing, particularly if you are replacing an existing suite with a non-standard rough-in.
Do Contura II toilet suites come with a soft-close seat?
Yes. All Caroma Contura II toilet suites include a soft-close seat as standard. The seat is polypropylene in white and fits the pan via a top-fix or side-fix hinge depending on the model. Replacement seats are available as separate accessories through Caroma's parts network if needed down the track.
What is the difference between Caroma Contura and Caroma Contura II?
Contura II is the second-generation redesign of the original Contura range. The primary change is full adoption of Cleanflush rimless bowl technology across all toilet models, which was not standard in the original Contura line. Cistern and pan proportions were also refined in the II update, and the range was extended to include a broader set of bathroom products including basins and tapware.
Are Caroma Contura II toilets available in colours other than white?
No. Caroma Contura II toilet suites are manufactured in white vitreous china only. Matte black, matte white, or other coloured pan finishes are not part of the Contura II toilet offering. If a non-white toilet finish is required, alternative Caroma ranges or other brands in the TBS toilets collection would need to be considered.
