1500mm to 1700mm bath buying guide
The 1500mm to 1700mm band is where most baths sit. It covers freestanding, back to wall, corner, inset, island and spa baths in acrylic, stone and solid surface, from Decina, Caroma, Bao, Turner Hastings, Fienza, BelBagno, Kaskade, ADP and Otti. The names 1500mm bath, 1600mm bath and 1700mm bath are rounded: the lengths on the baths include 1520mm, 1525mm, 1555mm, 1675mm and 1680mm as well as 1500mm, 1600mm and 1700mm. The sections below cover what each length means for a room and whether a 1500mm bath is too small. They also cover weight and the floor, each installation type, and what to check on waste before ordering.
What the band covers
Standard baths are about 1500mm to 1700mm long and 700mm to 800mm wide. A standard bath fits most Australian bathrooms, and layout matters as much as size. The baths here run wider than that range. Widths run from about 700mm to 860mm, and outer heights from about 400mm on inset baths to about 600mm on freestanding baths. This is the common range, and it is where most people choose between a short bath and a long one.
Lengths are not always exact. A 1500mm category includes baths at 1525mm, 1550mm, 1560mm, 1620mm and 1740mm, so the category name is a guide and the dimensions on the product page are the fact. Read the specification line of the bath you are considering, not the length in its title.
Is a 1500mm bath too small
For most people it is not, and for some it is. A 1500mm bath is not too small to lie down in unless you are on the taller side, and it is the best compromise for mixed households. The room numbers are firmer: a 1500mm bath can work in a room 1650mm or longer, depending on tapware and clearances, and a 1700mm bath generally needs a wall of at least 1800mm.
The better question is how deep and how wide the bath is. Depth matters more than length in a small bathroom, and about 450mm to 480mm of internal depth is a good middle. The inner depths here are 430mm on the Caroma Contura II and Urbane II, 450mm on the Otti Hampton, 456mm on the Bao, 470mm on the Decina Regent and 410mm on the Decina Aurora. Straight baths come in 700mm or 750mm widths for compact spaces, and a 1500mm by 800mm bath gives extra shoulder room. The Bao 1500mm baths are 750mm wide, and the Caroma Contura II 1500mm is 780mm. A 1500mm bath with a deep body can be a better soak than a longer, shallower one.
Choosing between 1500, 1600 and 1700mm
Length is a trade between floor space and the stretch of the soak. A 1700mm bath suits a larger ensuite, or a bath used by two people, and 1675mm to 1700mm is comfortable for an adult when a shower will share the bath. A 1500mm bath suits a short wall. The in-between lengths, 1525mm to 1680mm, give a little extra over 1500mm without taking the full wall of a 1700mm bath. If you are tall, check whether 1500mm would feel cramped.
The size pages hold each length across makers: 1500mm baths, 1600mm baths and 1700mm baths. For shorter walls, baths under 1500mm and small baths hold the compact options, and baths over 1700mm covers the longest.
Measuring the room
The wall decides the bath more than the floor does. A freestanding bath needs at least 50mm on each side, and 50mm to 100mm around it for cleaning and plumbing access. Measure the wall, then the door swing, the window, the vanity and the toilet. Check that the bath does not block doors, drawers or walkways, and remember that an extra five centimetres matters in a small room. Leave access to the waste and taps and use a licensed plumber when plumbing or drainage has to move. A thick rim reduces the usable space inside a bath, so check the internal dimensions as well as the outer ones.
Weight and the floor
Acrylic baths here weigh from about 37kg to 75kg empty, with the Bao Fluted 1500mm freestanding at 37kg and the Decina Regent at 52kg. Stone and solid surface baths weigh much more, up to about 154kg. The weight of a heavy bath must be properly supported during and after installation, so the floor needs checking. Acrylic is lighter, which matters on upper floors, and solid surface baths may need floor reinforcement above ground level. Timber floors usually need reinforcement for heavy baths, and a structural engineer should assess the floor where the combined load is high. Ask the builder before ordering a stone bath, and add the water to the weight.
Freestanding, back to wall, corner and built in
Each installation type has its own page. Freestanding baths stand clear of the walls and need floor around them. Back to wall baths give the freestanding look with a flat side against a wall, so there is no gap behind to clean, and a back to wall bath needs less clearance because it sits against the wall. Corner baths fit two walls and come in left and right hand versions. Built in baths and tile flange baths are tiled over or boxed in, and an inset bath needs more tiling and waterproofing than a freestanding bath but suits tight layouts. Island baths sit inside a built hob. Spa baths add jets and a pump to an acrylic shell.
Spa baths in the band
Spa baths add jets and a pump to the same acrylic shell, and several Decina spa baths fall inside this band. The Turin comes in 1520mm and 1665mm lengths, the Uno in 1530mm and 1700mm, and the Shenseki in 1395mm and 1515mm. Capacity is given 200mm below the rim, so the litres show the water with a bather in the bath and not the volume to the overflow. A spa bath also needs access to the pump for servicing, which a back to wall or freestanding bath handles differently from an inset one, so plan the access before the tiling. The Decina spa baths page lists the maker's range.
A shower over the bath
If a shower will sit over the bath, the band is the right place to look. A bath for a shower over it should be at least 1500mm long and at least 700mm wide, and 1600mm to 1700mm is better if the room allows it. The shower baths page holds the baths made for that. A freestanding bath is not the right choice for a shower over it, because the bath is not fixed to a wall and cannot securely support a screen.
A width below 700mm is too narrow for a shower bath and a width above 800mm adds little for a combination. Check the internal dimensions, because a thick rim reduces the usable space. Depth of 400mm to 500mm is typical. Leave 900mm of clear floor in front of the bath where the room allows, and 600mm at the least. A fixed or folding glass screen works better than a curtain in a small room.
Overflow, waste and plug
Most baths here are sold with the plug and waste separate, so the bath, the waste and the tapware are three decisions. Some baths have an integrated overflow, such as the Decina Aurora, Regent and Prezzo. Others are non-overflow only, such as the Bao baths and the Caroma Contura II. Pop-down wastes are recommended for their safety, service and maintenance qualities, and the bath wastes page holds them. Australian building codes require fully removable bath wastes in some situations, so confirm with the plumber which waste suits the installation.
Models in the band, one by one
The Decina Prezzo is a classic oval with minimal clean lines and a thin bath lip, in 1500mm and 1700mm, 800mm wide and 530mm high. It has reclining lumbar areas at both ends that accommodate two bathers comfortably, adjustable self-supporting feet, an internal steel support frame and a centre waste. The 1500mm holds 121 litres at 37kg and the 1700mm holds 150 litres at 41kg, both measured 200mm below the rim, and both meet Australian Standard AS 1172.5:2019.
The Decina Regent is a freestanding oval with a classic traditional look, panel style details and a flared skirt around the base, in a high gloss white finish with an integrated overflow. It suits a Hampton or farmhouse inspired bathroom. The Otti Hampton is 1700mm by 800mm by 560mm in gloss white, with an elegant stepped rim and base, good heat retention and an integrated overflow, and it is also made in 1500mm. The Decina Aurora is a matte white back to wall bath in 1500mm and 1700mm with a premium pop-up plug and waste and an integrated slot overflow included.
The Bao Elegant has a shadowline detail around the base so the bath appears to lift slightly off the tiles, and its acrylic surface is non-porous and simple to wipe over. It comes in 1500mm and 1700mm, in gloss white and matte white, as a freestanding bath, a back to wall bath and a back to corner bath, with an inbuilt steel support frame and adjustable steel legs to assist with uneven surfaces. The Bao baths have no overflow and the plug and waste are sold separately.
Choosing a length
Start with the wall. Measure it, and subtract the clearances. Pick the installation type, then the material the floor can carry. Choose the length next: 1500mm for a short wall, and 1600mm to 1700mm where the room allows, the bather is tall or the bath is shared. Check width and inner depth against the length, because they change the soak as much as the length does. Finish with the waste and the tapware.
For the full range across sizes, shapes and materials, return to bathtubs.