Skip to content

300x450mm Tiles

0 Items

Whoops, there are none available in your area

View all products

300x450mm tiles: what this collection holds

This collection holds two tiles, and they are the same tile in two finishes. Thredbo is a white ceramic wall tile in 300 x 450mm, in satin and in gloss. Both have a cushioned edge, a non-rectified body, 8mm thickness and a wall only application, so the choice between them is the finish and nothing else.

A size with two products is best served by saying exactly what those two tiles are and what the format is for. The sections below cover what the size means, why a wall tile has no slip rating, how to lay a rectangle of this proportion, and what to check before you order. If you'd rather start wider, the main tiles collection sorts every tile by room, size, colour and material.

The size, written both ways

300 x 450mm and 450 x 300mm are the same tile. Shoppers search for it in either order, and as 300x450, 300*450 or 450*300, and we write it as 300 x 450mm, a rectangular tile. The first number is the width and the second is the height when the tile is hung upright, which is the way these tiles are usually set on a wall.

Each tile covers 0.135m2 on its printed size. The box covers 1.485m2 and carries no piece count, so the box works out at 11 tiles. If you are measuring a wall, divide the wall area by the box coverage, and then add an allowance for cuts that your tiler agrees.

The proportion is 2 to 3. It is shorter than a 300 x 600mm tile and a rectangle where a 450 x 450mm tile is a square. If you're comparing formats, the 300mm x 600mm tiles collection, the 450mm x 450mm tiles collection and the 300mm x 300mm tiles collection list the neighbouring sizes.

Thredbo, the range

Thredbo is a classic white ceramic, and white tiles suit any room and any style. The specifications that matter are: tile size 300x450mm, tile thickness 8mm, a box coverage of 1.485m2, a ceramic material, a non-rectified edge, a V1 pattern variation and a wear rating of Wall Category 0.

V1 is the uniform end of the appearance scale. Tiles installed will have a uniform overall appearance with minimal texture and colour variation. That is the reason a white tile of this kind is easy to order: a box from one batch matches the next, and the wall reads as one plain surface.

Why no slip rating

AS 4586 classifies the slip resistance of new pedestrian surface materials, and its wet pendulum test uses ratings from P0 to P5. The rating applies to floors people walk on, and it does not matter for a feature wall. A wall tile prints no P rating, and the Wall Category 0 line is its equivalent. If you need a floor to go with these walls, choose a tile that prints a P rating and a floor wear rating.

The wall tiles collection sorts every wall tile in the catalogue. For floor formats that sit well beside a plain white wall, the 300 x 300mm and 300 x 600mm size pages linked above are the usual place to start.

Ceramic for walls

Thredbo is ceramic, and ceramic differs from porcelain in the firing. The two share raw materials. Porcelain is baked at higher temperatures and for longer, and ceramic at lower temperatures for less time, which gives a softer, more lightweight tile. Ceramic is most popular on bathroom walls because it is light and easy to drill, which makes towel rails and shelves easier to fit.

Ceramic is a practical option for most bathrooms because it is easy to maintain and comes in many styles. Ceramic wall tiles are not rated for floors unless marked as suitable, which holds for the Thredbo tiles. The ceramic tiles collection covers the material across the catalogue.

Both porcelain and glazed ceramic suit shower walls, because neither needs sealing, which makes clean-up simple. Thredbo carries no care line, so confirm the care with the store before you use the tile in a wet area.

Laying a 300 x 450mm rectangle

The rectangle can be laid upright, on its side or offset, and each reads differently. Rectangle tiles laid vertically can make a shower feel taller and draw the eye upward, while a brick pattern gives a softer, more relaxed look, especially on a full-height wall. A vertical stack can also make walls appear taller.

An offset layout, sometimes called brickwork, staggers each row from the row above, usually by 50 percent. You can also stack tiles vertically or horizontally for a modern look, or offset them slightly for subtle movement.

In small bathrooms, smaller rectangles can make the room feel taller or wider depending on how they are laid, and vertical layouts often help a compact room. For more on the shape, the rectangle tiles collection and the subway tiles collection cover the narrower formats, and the vertical stack tiles collection shows that layout across the catalogue.

Setting out the wall

The tile is 450mm tall, so three upright tiles stack to 1,350mm before the grout lines are added, and four reach 1,800mm. Measure the wall from the floor or the tray and work out where the cuts fall. A joint of 3mm or more adds a little to every course, so measure with the joint included.

A bathroom wall is usually broken by a window, a niche or a fixture, and each one changes where the cuts land. Set out the wall on paper first, or ask the tiler to dry lay a few rows. The tiler will also tell you what the substrate needs, which the tile itself cannot.

White in a room

White ceramic is the easy partner for other finishes in the room. A timber vanity, a stone benchtop, black tapware or brushed brass fittings all show up against it. Satin Thredbo keeps a calm backdrop beside patterned floor tiles, and gloss Thredbo suits a room with a window where it can bounce the daylight across the wall. Hold a sample next to the vanity and the paint before you commit.

White is a classic tile choice, and white tiles work in any room and suit any style. The practical test is simple: a tile reads differently in each room's light, so compare it with your benchtop, cabinets and paint before you commit. The white tiles collection sorts every white tile by finish and material, which makes it easy to compare Thredbo with the other whites in the catalogue.

Choosing the size

Tile size makes a noticeable difference to a wall. Smaller rectangles fit neatly around fixtures, and longer formats give wider walls a cleaner finish. Large tiles are not necessarily better for small rooms, but they can reduce grout lines and create a cleaner look that often makes a small room feel more open.

A worked example for this size: a splashback 2.7m wide and 0.6m high is 1.62 square metres. A 300 x 450mm tile covers 0.135 square metres, so it takes 12 tiles before cuts. Laid with the 450mm side horizontal, each course is 300mm tall and the splashback takes two courses; with the 450mm side vertical, a 0.6m splashback takes a course and a half, which means a cut. Choose the orientation that lands on a whole course.

The 300 x 450mm tile sits in the middle. It has fewer joints than a 300 x 300mm tile on the same wall, and more flexibility around a niche or a window than a 300 x 600mm tile. If the wall is narrow or broken up by fixtures, a smaller rectangle is easier to cut around. If the wall is wide and plain, a longer tile gives fewer interruptions.

The 300mm x 600mm tiles collection and the 300mm x 300mm tiles collection are the nearest sizes either side. Compare the same wall with each before you commit.

Bathrooms, kitchens and laundries

For a bathroom wall, the Thredbo tiles are wall only, which suits a wall. Ceramic is the most popular choice for bathroom walls, and the bathroom tiles collection shows the floor options to go with it.

For a kitchen splashback, a gloss finish brightens a kitchen with limited natural light, and a satin finish is the calmer choice. Ceramic wall tiles are commonly used for splashbacks because they wipe clean easily and come in plenty of colours and shapes. The kitchen tiles collection has more options.

For a laundry, ceramic's lighter weight suits walls and splash zones, handles moisture well and is easy to clean. The floor needs a different tile with a slip rating.

Ordering and matching

Measure once and order the whole quantity together. The V1 appearance means little variation, but a later order from a different batch can still differ slightly, even in a plain white tile. Ask your tiler how much to allow for cuts and breaks, since the box carries no allowance.

If you are pairing gloss and satin in one room, order both finishes together, since the Thredbo finishes sit next to each other in the same range and are meant to be seen side by side. A satin wall with a gloss feature strip, or the reverse, is a design option and not a recommendation.

What to check before you order

With two products, the differences are small and the checks are short. Confirm these before you add to cart.

  • The finish: satin or gloss.
  • The wall only line and the Wall Category 0 wear rating, so the tile does not end up on a floor.
  • The cushioned, non-rectified edge and the grout line of 3mm or more.
  • The box coverage of 1.485m2, and the area you measured.
  • The thickness of 8mm, if you are matching an existing wall.

Thredbo is a plain white ceramic wall tile in a 300 x 450mm rectangle. Pick the finish, set out the wall, plan the joint, and use the linked collections to match the floor and the rest of the room.

Frequently Asked Questions

What is the best tile finish for a bathroom, matte or gloss?

Matte tiles are trending strongly in Australian bathrooms for their contemporary look and practical ability to hide water spots and fingerprints. Gloss tiles reflect light and can make a bathroom feel brighter and larger, but show water marks and smudges more readily. For shower recesses and wet floors, matte or satin finishes with good slip resistance are generally preferred.

How many tiles do I need to order for my bathroom?

Measure your total wall and floor surface area in square metres, then add a 10–15% wastage allowance for cuts, breakages, and future repairs. For complex layouts with diagonal patterns or feature inserts, increase the wastage to 15–20%. Always order all tiles from the same batch (check the shade lot/batch number) as tiles from different batches can vary slightly in colour.

How do I choose between floor tiles and wall tiles?

Floor tiles must have an adequate slip resistance rating (P3 minimum for domestic bathrooms) and be durable enough for foot traffic. Wall tiles can be glazed ceramic, porcelain, or natural stone, they don't need to carry load but should be moisture-resistant. Many Australian renovators choose matching or coordinating floor and wall tiles from the same range for a cohesive look.

What tile size is best for a small bathroom in Australia?

For small bathrooms, tiles between 300 x 300mm and 600 x 300mm often work well on both walls and floors. Smaller mosaic or subway tiles (75 x 150mm or 100 x 200mm) are a classic choice for shower walls. While large format tiles can also work in small spaces, they require a very level substrate and expert installation. Avoid tiles that are too small on floors (like 50 x 50mm mosaics) in large quantities, as the increased grout lines can make a space feel busier.

How do I incorporate feature tiles without over-designing the bathroom?

The most effective approach is to choose one feature zone and use your feature tile there, a full-height shower wall, the bath surround wall, or the vanity splashback area. Keep the remaining surfaces in a neutral or complementary field tile. This creates impact without visual clutter. Limit your palette to two or three complementary materials for a cohesive result.

What is the slip resistance rating I need for bathroom floor tiles?

Australian Standards (AS 4586) require bathroom floor tiles to have a minimum slip resistance rating of P3 for domestic bathrooms and P4 or P5 for wet areas like shower recesses. The Blue Space recommends checking the slip resistance rating of any tile you're considering for floor use, particularly in the shower. Matte and textured porcelain tiles generally offer better slip resistance than polished or gloss finishes.

What is the difference between ceramic and porcelain tiles?

Porcelain tiles are fired at higher temperatures and are denser, less porous, and harder than ceramic tiles. This makes porcelain more water-resistant, more durable, and suitable for both indoor and outdoor applications, including high-traffic floors. Ceramic tiles are lighter and easier to cut, making them a practical choice for bathroom walls and splashbacks. For bathroom floors and wet areas, porcelain is generally the preferred option in Australia.

What proportion is a 300mm x 450mm tile?

It's a rectangular mid-size format at roughly a 1:1.5 ratio, more elongated than a square tile but noticeably shorter and less dramatic in proportion than 300mm x 600mm tiles, which run to a 1:2 ratio. That gentler proportion makes 300 x 450mm a common middle-ground choice for anyone who wants a rectangular laying pattern without the more pronounced directional pull of a longer plank.

How many 300mm x 450mm tiles do I need per square metre?

A single 300mm x 450mm tile covers 0.135 square metres, so just over 7 tiles cover one square metre before wastage. Add the standard 10 to 15% allowance for cuts and breakages on a simple rectangular room, and closer to 15 to 20% for a room with diagonal cuts, a feature border or an offset pattern.

What rooms suit 300mm x 450mm tiles?

This size works well on bathroom and laundry floors, kitchen floors and shower walls, where its rectangular shape gives more coverage per tile than a square 300mm x 300mm tile while still being manageable to cut around drains, fittings and room edges. It's a practical choice for a room that's a little larger or more rectangular in shape, where a square tile would need more cutting to fit cleanly.

What laying patterns suit 300mm x 450mm tiles?

The rectangular shape suits a straight stack, an offset brick bond, or a herringbone layout, though at this gentler 1:1.5 proportion the directional effect reads more subtly than it would with a longer plank format. A straight grid running the tile's length along the room is a common, lower-wastage default if you want the coverage benefit without a more complex pattern.

Can 300mm x 450mm tiles be used on both floors and walls?

Yes, depending on the specific range, this size is available in both floor-rated and wall-only finishes. A floor tile needs an appropriate slip resistance rating under Australian Standards (AS 4586) for the room, especially a wet area, while a wall tile only needs adequate moisture resistance since it doesn't carry foot traffic.

Is 300mm x 450mm tile more affordable than a larger format?

Generally it costs less per tile than a larger format from the same range, though price per square metre depends more on material and finish than on the exact size. Where this size can save on labour is in handling: it's lighter and easier to cut than a genuine large-format tile, which can keep installation time, and therefore total job cost, a little lower.