316mm x 316mm tiles at a glance
This collection holds one range: Alicante, a set of patterned porcelain tiles in a 316 x 316mm square. It is a collection of federation style tiles in six different patterns and colour palettes, each with a unique blend of colours and geometric shapes. The tiles are made in Spain, and they bring the old world charm of traditional tessellated mosaics together with the practicality of glazed porcelain.
Each tile is 9mm thick, glazed, matte, and finished with a cushioned edge. The six patterns are Heathcote, Kirkham, Eton, Derby, Shrewsbury and Brighton. The sections below cover the Alicante specification, how porcelain differs from cement, how to use a patterned square, and what to check before you order.
The wider category sits in the patterned tiles collection, the shape in the square tiles collection, and every other category in the tiles hub.
The Alicante specification
All six patterns share one specification block. The dimensions are 316mm x 316mm x 9mm. The material is glazed porcelain and the finish is matte. The slip rating is P3/R10, moderate to high slip risk and suitable for flooring in dry areas. The application is walls and floors. The area line reads indoors dry and covered outdoor areas.
The wear rating is 4, suitable for floors in normal use areas with a low risk of scratching. The edge is non-rectified and cushioned. The texture is low with smooth contours, the appearance rating is V1, which means a uniform appearance, and the maintenance line is easy to clean. A box holds 10 pieces and covers 1.00m².
The two slip lines are worth reading together. The slip rating describes the tile as suitable for dry areas, and the area line adds covered outdoor areas, so the tile suits places such as a living area, an entry, a verandah under a roof or a dry bathroom floor. It doesn't suit a wet outdoor surface or a pool surround. The P value comes from the wet pendulum test in Australian Standard AS 4586, which grades surfaces from P0 to P5, and the R value comes from the ramp test. Neither is a substitute for checking the rating against the zone.
Porcelain, not cement
Encaustic tiles are traditionally made of cement. They are wet dyed cement pressed with stencils, porous, and they need sealing before installation and resealing every couple of years. Avoid cement tiles on shower bases and in fully exposed outdoor areas, and choose a porcelain encaustic look tile for those places.
Spanish pattern tiles in porcelain replicate the encaustic look, and because they are fired and non-porous, they do not need sealing. Alicante is a glazed Spanish porcelain, and the maintenance line is easy to clean.
That is the practical gain of the range. You get a patterned floor without the upkeep of a cement tile. The limit is the rating: the tile is rated for dry areas and covered outdoors, so a shower base or an exposed terrace is outside what it supports.
The six patterns
Each pattern has its own colour palette. Heathcote is a blue pattern, suited to bathroom floors, bathroom walls and living areas. Kirkham is a brown pattern. Eton and Brighton are both black patterns. Derby is a grey pattern, suited to feature walls, kitchen floors and living areas. Shrewsbury is a terracotta pattern.
Four of the six are a diamond pattern with a vertical stack layout: Heathcote, Kirkham, Eton and Brighton. Derby and Shrewsbury are not. The range also carries Moroccan style, mosaic, mid century and patterned tags, and Kirkham, Eton and Brighton carry Hamptons and heritage tags as well. Those are the store's own labels for the look.
The descriptions are the same across all six, so the pattern and colour are what separate them. Order a sample of the ones you like and lay them side by side, because the same geometry reads differently in blue, black and terracotta. The blue tiles, black tiles, grey tiles, brown tiles and terracotta look tiles collections show each colour across other ranges.
Using a patterned tile well
Patterned tiles are a feature choice, not a whole-room default. They work well on bathroom floors, in powder rooms, as splashbacks, in entries and in semi-outdoor areas, and they need care across large open-plan areas and in rooms with a busy benchtop. For balance, pair a pattern with plain tiles that share one of its colours.
That advice suits a 316mm square. A square this size gives a fine repeat, so a small room or a defined zone shows the pattern clearly. In a powder room or a small entry the pattern is the point. In a very large floor, the same pattern becomes a lot of busy surface, so hold back there.
A plain neighbour helps. For Eton or Brighton in black, a plain warm tile in the adjoining room keeps the pattern from competing. For Derby in grey, a soft white wall lets the floor lead. Lay samples flat and upright, because a pattern reads differently on a floor than on a wall.
Bathrooms, kitchens and living areas
Heathcote suits bathroom floors and walls and living areas, and the range suits walls and floors. In a bathroom, the dry-area rating means the tile suits a dry floor outside the shower, a feature wall or a vanity surround, and the shower base is outside what the rating supports. The bathroom tiles collection shows tiles chosen for the room, including wet-area floors.
Derby suits kitchen floors and feature walls. A kitchen floor of Alicante suits a dry, covered kitchen, and the easy-to-clean line helps with spills. The kitchen tiles collection shows other kitchen options.
Living areas suit several patterns. A patterned square in an entry or a sunroom is a classic use, echoing the hallway and verandah tessellation covered in the history above. The floor tiles and wall tiles collections let you compare the range with plain alternatives.
Layout and the one third rule
Set the pattern out before the first tile is fixed. Mark the centre of the room or the centre of the doorway, dry lay a row of tiles along it, and move the line until the cuts at the two walls are equal and no cut is thinner than half a tile. A tile with a pattern shows an uneven cut more than a plain one, so spend the time on the layout.
People searching for this tile often ask what the one third rule is. It is a layout rule: offset each row by roughly a third of the tile length, not a half. Longer and larger tiles can bow slightly, and a half offset puts the low ends beside the raised centres of the next tile, which creates lippage. The rule matters most for longer or larger tiles, and smaller tiles show little difference.
A 316mm square is a small tile, so the rule has little effect on it. A pattern like Alicante is designed to be read as a grid, and four patterns carry the vertical stack tag. Laying the squares in a straight grid keeps the geometry aligned, which is how a tessellated floor is meant to read. Ask your tiler how they plan to set out the first row, because the pattern should centre on the room or the doorway.
The edge is non-rectified and cushioned, which means a slightly softened, irregular edge. That suits an old-world look, but it affects the joint. Plan for a joint wide enough to absorb the variation, and confirm the figure with your tiler, because Alicante carries no recommended gap.
For a smaller square for comparison, the 300mm x 300mm tiles collection shows other patterned squares, and the St Kilda tiles collection shows an octagon and dot mosaic.
Where a pattern works, and where to hold back
A pattern suits a small room and can overwhelm a large one. Take care across large open-plan areas, in rooms with a busy benchtop, and where resale is a concern. A busy floor beside a busy benchtop leaves the eye nowhere to rest.
Alicante works best where the pattern is the hero: an entry, a hallway, a powder room, a sunroom or a covered verandah. It also works as a defined zone, such as a breakfast nook, a bar area or a laundry. Outside those zones, a plain tile next to it gives the pattern room. Pair a pattern with plain tiles that share one of its colours, so a Derby floor sits well with a plain grey, and a Shrewsbury floor with a plain warm terracotta tone.
If you are unsure, start smaller. A narrow border or a single room costs you less if your taste changes, and the same tile can later extend to the next room. The patterned tiles collection shows other ranges with a smaller repeat or a plainer palette, if Alicante feels too strong for the whole room.
Ordering Alicante
Order an extra 15% over the exact quantity, to cover breaks and offcuts. Colour, size and texture may vary from batch to batch, so order everything for one area together and keep a few spares.
A box holds 10 pieces and covers 1.00m², so the quantity is simple: measure the area in square metres, add the allowance, and round up to whole boxes. A pattern that needs to line up across a floor makes careful setting out more important than usual, so ask your tiler to plan the layout from a centre line before you order.
Is Alicante the right tile?
Alicante suits you if you want a heritage-inspired patterned floor in porcelain, you are tiling a dry or covered area, and you want a surface that is easy to clean without sealing. The six patterns give you a choice of palette, from blue and grey to black, brown and terracotta.
Look elsewhere if you want a shower base, an exposed terrace or a pool surround, because the tile is rated for dry areas and covered outdoors. Look elsewhere too if you want a rectified edge for a very fine joint, or a plain surface that doesn't need planning around a pattern. The outdoor tiles collection covers the exposed case.