Three piece basin tap sets buying guide
A three piece basin tap set has a spout in the middle and a separate hot handle and cold handle either side. It is also called a basin set, a basin tap set, a bathroom tap set or a 3 piece tap set, and this page holds all of them. The sets here run from classic cross handle and lever styles to knurled and quarter turn designs, in chrome, brushed nickel, matte black, bronze, gold, brass and gunmetal. Below you will find when a set is the right choice over a single lever mixer, how to check the holes in your basin, and what to measure, fit and look after.
What a three piece set is
The three pieces are the spout and two taps, each fitted to its own hole in the basin or the bench. Hot and cold are controlled separately, and the water mixes in the spout. This is the older arrangement, and it has come back in renovations because it gives a symmetrical, finished look on the vanity and suits period, Hamptons, art deco and mid century rooms. The set also gives you the temperature you want by hand, with no lever to find in the dark.
Three piece set or single lever mixer
Choose the set when the look of the room calls for it, or when the basin already has three holes. Choose a single lever mixer when you want one-handed control and a small footprint. This table sets out the difference.
| Question | Three piece set | Single lever mixer |
|---|---|---|
| Tap holes needed | Three | One, usually 35mm |
| Control | Separate hot and cold handles | One lever sets flow and temperature |
| Bench space | Needs width for two handles and the spout | Compact |
| Style | Classic, symmetrical, period and Hamptons | Modern, minimal |
| Where to look | This page | Basin mixers |
If you want to compare every basin tap type before you decide, the bathroom basin taps page lays them out together.
Will a three piece set fit your basin
The holes decide it. A three piece set needs three tap holes, and the spacing between the handle holes and the spout hole has to match the set. A basin with a single hole takes a mixer, not a set, and a mixer is not a direct replacement for a three piece set unless the holes are changed. A basin with three holes can take a set, or a three hole mixer, or a single mixer with a cover plate that hides the unused holes.
A basin with no tap hole takes a wall mounted set or a bench mounted tap through a hole cut in the vanity top. Measure the hole spacing on your basin before you order, and read the product page for the spacing the set needs. For a new vanity, choose the basin and the set together so the holes line up. Our bathroom basins show their tap hole layouts.
Handle styles
The handles set the character of the set. A lever handle is easy to grip with wet hands, and suits a modern or transitional room. A cross handle reads as traditional and suits a heritage or Hamptons bathroom. A knurled handle has a textured grip and suits a mid century or industrial look. Some sets use a quarter turn handle, which moves from off to full flow in a short turn and is simple to use for children and older people. Pick the handle by how the room feels, then check the spout and handle height against the basin.
Spout reach and height
Most spouts on this page reach about 135mm from the base, with shorter spouts near 110mm and longer ones up to about 224mm. The height to the spout runs from about 110mm to 165mm. The stream should land near the centre of the bowl, not on the rim, and the spout should clear the basin edge with space for your hands under it. A swivel spout can be turned aside to rinse the basin or fill a jug. Check the handles will not clash with the splashback, the mirror or a wall at the side of the basin.
Replacing an old set
A like-for-like swap is the simplest job: a three piece set replaces a three piece set in the same holes. Measure the spacing between the handle holes and the spout hole, and compare it with the new set on the product page, because a small difference in spacing stops the pieces lining up. Look under the basin at the supply connections, the tee piece and the hoses, since old sets often use a different arrangement from a new one. Fitting from below the vanity is the quickest route, and a plumber can usually do it without touching the wall.
Three piece sets in small bathrooms and powder rooms
A set needs more width than a mixer, so measure the bench or the basin deck before you order. A powder room basin with three holes suits a set, because the room is seen more than it is used hard, and a cross handle or knurled set gives the room a clear style. In a compact ensuite, check that the handles clear the mirror and the wall, and that the handle swing does not touch the spout.
Hob mounted or wall mounted
Most three piece sets on this page are hob mounted, which means the spout and handles stand on the basin or the vanity top. A hob mounted set is the easier fit in a renovation, because the plumbing comes up from under the vanity and a plumber can get at it. A wall mounted set puts the spout and the handles on the wall above the basin. It leaves the bench clear, and it needs the plumbing roughed in before tiling, so the decision is made early. For wall mounted pairs and mixers, see wall basin and bath mixer sets.
Cartridges, spindles and the body
Three piece sets use a ceramic disc spindle or cartridge in each tap, which uses two ceramic plates to control the water and resists wear and drips. We recommend a solid brass body, and most of the sets here are lead-free brass. A quarter turn spindle opens and closes the water in a short turn, and a standard spindle takes a longer turn. Ask a plumber to confirm that spare spindles and washers can be sourced for the range you choose.
Lead-free tapware and water use
The National Construction Code limits lead in plumbing products that touch drinking water to 0.25 percent from 1 May 2026, and lead-free brass is the way most sets meet it. WELS is the Australian water efficiency label, and more stars means the set uses less water. Most sets on this page carry 5 stars. Check WaterMark approval on the product page, because it affects legal installation, and use a licensed plumber to fit the set.
Choosing a finish
Choose the finish to match the other metal in the room, and use the same finish on the spout and both handles so the set reads as one piece.
- Chrome suits white tiles and classic rooms. See chrome taps.
- Matte black gives contrast with white basins and pale tiles. See black taps.
- Brushed nickel is soft and muted, and pairs with natural stone. See brushed nickel tapware.
- Brushed brass and gold are warm against timber and marble. See brushed brass taps and gold taps.
- Bronze and gunmetal are deep and suit dark cabinetry. See bronze taps and gunmetal tapware.
The finish process differs by colour. Chrome and matte black are mostly electroplated, while brushed nickel, brushed gold, bronze and gunmetal are mostly PVD, which bonds the colour to the metal and resists scratching and tarnish. Check the product page for the process of the exact set you want.
Caring for a three piece set
Wipe the spout and handles with a soft microfibre cloth and warm water, and add a little mild soap if needed. Dry them so water does not set on the surface, which matters most in hard water areas. Knurled and cross handles hold dust and soap in the grooves, so a soft brush now and then keeps them clean. Avoid bleach, harsh sprays and abrasive pads. A tap that drips at the spout usually needs a new spindle or washer, and it is worth fixing early.
What comes in the box
The box depends on the set. A typical three piece set comes with the spout, two handles or handwheels, a copper tee piece, two inlet bodies and an installation kit. Some sets come with a hot tap, a cold tap and a spout, plus a warranty card. A wall set comes with the trim and fixing kit, and the in-wall parts may be sold separately. Read the product page for the exact list before you order.
Three piece sets by brand
The sets on this page come from Nero taps, Phoenix taps, Modern National tapware, Fienza taps, Caroma taps, Clark taps and Meir taps. Buying the basin set and the shower and bath taps from one range keeps the handles and finish matched across the room. If you need a separate spout, see spouts.