Black Towel Rails Buying Guide
A black towel rail is a fixed, unheated rail in a matte black or antique black finish. Buying one is mostly a matter of bar count and length, then height on the wall, then matching the black to the tapware already chosen. The sections below follow that order. If you are still comparing finishes, the full range of towel rails and racks shows them all; stay here to compare black rails by form, length and fixing.
The rails on this page are made by Caroma, Clark, Fienza, Meir, Nero, Phoenix and Modern National. Each product shows its own material, length, projection and fixing details, and the sections below use those figures.
Single, double or hand towel rail
One bar holds the towels of one or two people, and a second bar lets two towels dry side by side without overlapping. A double rail is the better call when more than one person uses the bathroom every day. A single rail fits a short wall, or a rail with one job, such as holding a bathrobe beside a basin.
Hand towel rails (also called guest towel rails) are the short version. Sizes run from 220mm for the Fienza Empire Slim to 300mm for the Meir Round and Meir Curvaé, 300mm for the Caroma Luna and 430mm for the Clark Square. They sit beside a basin or in a powder room, where a full rail would crowd the wall.
The two form pages split the same range by bar count: single towel rails and double towel rails. If you want rungs rather than bars, towel ladders are the form to look at.
Choosing the length
Length decides how many towels hang without crowding. A rail of 800mm or 900mm is wide enough for two large towels to dry side by side, which is why those lengths suit family bathrooms. Shorter rails of 600mm to 640mm suit ensuites and the end of a vanity run, where one or two towels are enough.
| Length range | Where it suits | Examples in black on this page |
|---|---|---|
| 220mm to 430mm | Hand towel beside a basin or in a powder room | Fienza Empire Slim 220mm, Meir Round 300mm, Clark Square 430mm |
| 600mm to 640mm | Ensuite, short wall, one or two towels | Nero Mecca 600mm, Caroma Liano II 640mm, Meir Round 600mm |
| 700mm to 760mm | Mid-size bathroom, a wall between a door and a shower | Nero Dolce 700mm, Phoenix Nostalgia 760mm in antique black |
| 800mm to 840mm | Family bathroom, two large towels side by side | Nero Bianca 800mm, Fienza Tono 810mm, Caroma Liano II 840mm |
| 900mm and over | Long wall, shared bathroom | Fienza Kaya 900mm, Meir Round 900mm |
Measure the wall first, then allow clearance at each end so the rail does not sit against a door frame or a tiled corner. Some rails are sold at a fixed length. The Fienza Tono and Fienza Empire Slim are fixed length, so the length you order is the length you hang. The Fienza Lillian, Phoenix Cromford and Phoenix Nostalgia can be cut down to size.
How high to fix a towel rail
Most towel rails go between about 900mm and 1200mm above the finished floor. Heights of 900mm to 1100mm, 1000mm to 1200mm and a flat 1200mm are all in common use. The spread exists because the rail has to suit the person who uses it every day.
Our advice is to set the top bar at a height where the tallest user can hang a towel without lifting their elbow above the shoulder, then check the lower bar still clears the floor tiles and any vanity beneath it. Hand towel rails sit higher than bath towel rails, at about the height of a basin tap handle or a little above it.
Where the rail goes
The most useful spot for a full-size rail is close to the shower or bath, so the towel is within reach when you step out. A hand towel rail belongs at the vanity or in a powder room. A longer wall away from the shower works as a drying station in a larger bathroom, where the rail has room to hold several towels.
Fix the position before tiling and rough-in, not after. Planning the rail at framing stage lets the builder set in-wall blocks at rail height, and the tiler can leave the fixing points clear.
Spacing when you use more than one rail
Grouped rails need about 270mm to 300mm between bars, so a towel on the upper bar clears the one below. A bathroom with two users works well with three grouped rails, and a household of two or more adults can take four or five. The third bar has a second use: it dries a bath mat.
Fixings, projection and what comes in the box
Every rail on this page ships with a fixing kit, and the Nero rails add printed installation instructions to the box. Fixing methods differ by range.
- The Caroma Luna, Urbane II and Contura II rails use dual fixings, one at each end. The Caroma Liano II uses three points of fixing.
- The Fienza Kaya double rail has a five-point wall mount with fully concealed fixings.
- The Phoenix Cromford uses a dual fixed concealed bracket.
- The Meir Curvaé double rail is fixed with a dual wall fixing.
- The Fienza Lillian is a no-spin design, so the rail does not turn on its bracket once it is tightened.
Projection tells you how far the rail stands out from the wall, and it matters beside a door or in a narrow walkway. These are the figures for the double rails.
| Rail | Overall length | Projection or depth | Material line |
|---|---|---|---|
| Nero New Mecca double 800mm | 800mm | 110mm | 304 stainless steel |
| Fienza Tono double 810mm | 800mm | 115mm | Stainless steel |
| Fienza Kaya double 900mm | 900mm | 112mm depth | Stainless steel |
| Caroma Liano II double 840mm | 843mm | 120mm | 304 stainless steel |
| Meir Curvaé double 800mm | 828mm | 114mm depth | 304 stainless steel |
| Nero York double 600mm | 607mm | 126.5mm | Brass |
| Phoenix Cromford double 800mm | 850mm | 137mm | Brass |
The fixing distance is shorter than the overall length on most rails, so mark the wall from the fixing distance, not from the length in the product name.
Materials behind the black finish
Black on a towel rail is an electroplated or coated surface over a metal body, and the body material changes from range to range. The Phoenix Radii, Vivid Slimline, Gloss and Cromford rails are brass. The Meir Round is solid brass, and the Nero York and the Modern National Mirage, Eva and Luxe rails are brass too. The Caroma Liano II and Urbane II, the Meir Curvaé and the Nero Mecca, Bianca and Celia rails are stainless steel, with with Nero and Meir naming 304 grade. The Fienza Tono, Empire Slim and Kaya rails are stainless steel as well. The Phoenix Lexi MKII is zinc alloy, and the Clark, Caroma Contura II and Caroma Cosmo rails carry a metal construction line.
For a bathroom near the coast, Nero's Zen range is the one to look at, which is made from marine grade stainless steel and comes in all of Nero's colours.
Which black
Matte black is the finish on almost every rail here. The Phoenix Nostalgia is the exception: its antique black finish suits a period or heritage bathroom with an old-world tap and basin. If you are matching a tap, shower or accessory that is already chosen, check the name of the black on that product. Brands name their blacks differently, and a rail from the same range as the tapware is the safest way to get an exact match.
Against white tiles or pale stone the rail stands out and gives the wall some structure. In a dark bathroom it recedes and keeps the wall calm. Black also anchors a mixed-metal scheme, so a bathroom with brushed nickel, gunmetal, brass and chrome can take one black rail without it looking out of place.
Black towel rails by brand
A rail from the same range as the tapware is the simplest route to a cohesive set. The links below go to each brand's full range of rails in every finish.
- Nero: the Mecca, New Mecca, Bianca, Celia, Dolce and York rails in matte black, in single, double and hand towel sizes. See Nero towel rails.
- Caroma: Luna, Urbane II, Liano II, Contura II and Cosmo in matte black or black. See Caroma towel rails.
- Phoenix: Radii in round and square plate, Vivid Slimline, Gloss, Lexi MKII, Cromford and the antique black Nostalgia. See Phoenix towel rails.
- Fienza: Lillian, Kaya, Tono and Empire Slim. See Fienza towel rails.
- Meir: Round and Curvaé. See Meir towel rails.
- Clark: Round and Square rails in matte black. See Clark towel rails.
Modern National's Mirage, Eva and Luxe rails sit on this page too, each in matte black with brass construction and a fixing kit. The Mirage and Eva are round styles and the Luxe is square.
Completing the set in black
A towel rail is rarely the only fixture on the wall. A consistent finish across the rail, the paper holder and the hooks reads as one decision rather than three. Black toilet roll holders and black robe hooks cover the other two fixtures in this finish, and black bathroom accessories gathers every black accessory type in one place. For a narrow hand towel position, the hand towel holders page shows the rings and short rails together.
When you choose across brands, match the shape language as well as the colour. A round plate rail beside a square tap looks deliberate in some rooms and accidental in others, so keep the profile consistent where the rail, tap and shower arm sit close together.
Checking fit before you order
Most fitting mistakes come from reading the wrong number. Compare the wall length with the fixing distance rather than the overall length, check the projection against any door swing or shower screen nearby, and set the height for the tallest regular user. These are fixed, unheated rails, so there is no power or plumbing to plan. What needs attention is a solid wall behind the fixing points and, on a tiled wall, where the tile joints fall.

