Brick bond tiles use a staggered offset lay pattern — each tile sits halfway across the one below it — to create the look of traditional brickwork on any tiled surface. The result is a horizontal rhythm that suits bathrooms, kitchens, laundries, and feature walls equally well. Because the pattern is defined by how the tiles are laid rather than the tile shape itself, you can achieve it with most rectangular formats, from slim subway planks through to large-format 600 x 300 mm tiles.
What is brick bond and how does it differ from other patterns?
Brick bond, also called running bond, offsets each row by 50 per cent of the tile length. This differs from stack bond, where tiles align in straight vertical columns, and herringbone, which sets tiles at 45 degrees. The 50 per cent offset distributes grout lines evenly and gives walls a classic, low-visual-noise result that reads well in both small and large spaces.
Horizontal versus vertical brick bond
Horizontal brick bond — rows running across the wall — is the standard orientation and suits most wall heights. Vertical brick bond rotates the pattern 90 degrees so the offset runs up the wall rather than across it. Vertical laying visually raises a ceiling in rooms with low soffits or short wall runs, and it has become common on bathroom feature walls and shower niches. The tile format and grout choice stay the same; only the laying direction changes.
Sizes and formats that suit brick bond
The most practical formats for brick bond are tiles with a 2:1 length-to-width ratio, because the 50 per cent offset then produces a clean, even pattern without awkward cuts at the edges. Common sizes include:
- 75 x 150 mm — the classic subway format, tight grout lines, works in small bathrooms and splashbacks
- 100 x 200 mm and 100 x 300 mm — slightly larger, fewer cuts on bigger walls
- 200 x 400 mm — a mid-format option that scales well in open-plan kitchens and laundries
- 300 x 600 mm — large format that reduces grout frequency; popular in wet areas and floor-to-ceiling shower walls
Non-2:1 rectangles can be laid in brick bond but the offset will not be exactly half the tile length, so check cut calculations with your tiler before ordering.
Finishes and materials available
Brick bond tiles are available across a wide range of surfaces and finishes. Gloss white ceramic remains the most common choice for bathroom walls because it reflects light and is easy to clean. Matte and satin finishes show fewer water marks in wet areas and suit contemporary interiors. Textured surfaces, including concrete-look and stone-look porcelain, add depth to feature walls without requiring natural stone maintenance. For floors, use a tile rated R10 or above for slip resistance in wet zones — most porcelain options in a 300 x 600 mm format meet this rating.
Where brick bond tiles work well
Brick bond is one of the most versatile laying patterns because it works on walls, floors, and splashbacks without looking forced. In bathrooms, it appears on shower walls, behind freestanding baths, and as full-height feature walls alongside bathroom vanities. In kitchens, a 75 x 150 mm gloss white tile in brick bond behind a cooktop is a proven, long-lasting choice that does not date quickly. In laundries, larger 300 x 600 mm formats cut down on installation time on utility walls.
How to choose between brick bond and stack bond
Choose brick bond when you want a traditional, widely recognised pattern that hides minor wall irregularities — the staggered grout lines disguise unevenness better than straight stack columns. Choose stack bond when you want a more graphic, geometric result with strong vertical and horizontal lines. For most renovation and new build projects, brick bond is the lower-risk option because it suits a broader range of tile sizes, tiler skill levels, and room proportions.
Grout width and colour considerations
Grout joint width affects how the pattern reads. A 1.5–2 mm joint with matching or tone-on-tone grout keeps the focus on the tile surface and creates a subtle, almost seamless look. A 3–5 mm joint in a contrasting colour — charcoal grout with white tiles, for example — emphasises the brick bond grid and adds graphic contrast. For large-format tiles (300 x 600 mm and above), check the tile manufacturer's recommended joint width, as most rectified porcelain tiles require a minimum 2 mm joint to allow for thermal movement. Browse the full tiles range for formats and finishes that complement brick bond applications.
