Skip to content

Caroma Liano II Bathroom Accessories

0 Items

Whoops, there are none available in your area

View all products

Caroma Liano II bathroom accessories

Liano II is the classic, minimalist accessory range from Caroma. It is built in 304 stainless steel, fixed with a three-point mount behind a 43mm round plate, designed and engineered in Australia and covered by a 20 year warranty line. Every piece comes in six finishes. This page lists each Liano II piece with its size, explains how the finishes differ and gives the figures you need to plan a full set on the wall.

Liano II pieces and sizes

Piece Length or size Projection Fixing distance
Single towel rail, 640mm 643mm overall 75mm 600mm
Single towel rail, 840mm 843mm overall 75mm 800mm
Double towel rail, 640mm 643mm overall 120mm 600mm
Double towel rail, 840mm 843mm overall 120mm 800mm
Hand towel rail 293mm overall 75mm 250mm
Towel ring 180mm diameter, 197mm high 50mm Not given
Robe hook 50mm high 57mm Not given
Large wall hook 90mm diameter 50mm Not given
Toilet roll holder 155mm long 75mm Not given
Double toilet roll holder 278mm long 76mm Not given
Spare toilet roll holder 326mm high 100mm Not given
Soap dish 193mm long 100mm 150mm
Soap bottle holder 50mm long, 100mm high 75mm 48mm
Bathroom shelf 493mm long 100mm 450mm

One rule runs through the long pieces: the overall length is the fixing distance plus 43mm, the width of the round plate. The 640mm rail is fixed at 600mm and measures 643mm, the hand towel rail is fixed at 250mm and measures 293mm, the soap dish is fixed at 150mm and measures 193mm, and the shelf is fixed at 450mm and measures 493mm. Mark the drill holes from the fixing distance and plan the wall from the overall length.

The six finishes

Finish Process Collection to compare
Chrome Chrome plated Chrome bathroom accessories
Matte Black Electroplated Black bathroom accessories
Brushed Nickel PVD Brushed nickel bathroom accessories
Gunmetal PVD Gunmetal bathroom accessories
Brushed Brass PVD Brass bathroom accessories
Brushed Bronze PVD Bronze bathroom accessories

Four of the six finishes are PVD, a coating chosen for striking colour and durability. Chrome is plated and Matte Black is electroplated. Every piece in the range is offered in all six, so a full Liano II set can be built in any one of them without gaps.

Towel rails

The rails are sold as singles and doubles in two lengths, 640mm and 840mm. The double stands 45mm further from the wall than the single, 120mm against 75mm, and it is the figure to check beside a door or a shower screen. The 840mm rail is 200mm longer than the 640mm, nearly a third more bar, and a double carries two bars. The hand towel rail is the 293mm piece for a basin wall, and the towel ring is the round alternative at 180mm across and 197mm high.

For rails in the same finish from other makers, see chrome or brushed nickel accessories.

Hooks and toilet roll holders

The robe hook stands 57mm from the wall and the large wall hook 50mm, so the wall hook is the shallower choice behind a door. The toilet roll holder is 155mm long and stands 75mm out, the double holder is 278mm long, 123mm longer than the single, and the spare holder is the tall piece, 326mm high and 100mm deep. Choose the double for two rolls side by side and the spare holder when you want a reserve roll standing above the one in use.

Soap dish, bottle holder and shelf

The bottle holder is the smallest piece in the range at 50mm long, and it is fixed at only 48mm, so it needs a narrow strip of wall. The soap dish is 193mm long and 100mm deep, the bottle holder is 100mm high and 75mm deep, and the shelf is 493mm long and 100mm deep. The shelf and the dish stand the same 100mm from the wall, so they line up in a shower. See Caroma soap holders for the dishes and holders across the Caroma ranges and soap dishes and dispensers for every maker.

Liano II against Riviere and Contura II

Figure Liano II Riviere Contura II
Single rail projection 75mm 75mm 83mm
Double rail projection 120mm 123mm 123mm
Shelf 493mm long, 100mm deep 475mm long, 112mm deep 450mm wide, 115mm deep
Toilet roll holder 155mm long, 75mm deep 194mm long, 55mm deep 167mm wide, 83mm deep
Robe hook projection 57mm 97mm 23mm
Warranty line 20 years 20 years Not given

Liano II shares its rail depth with Riviere and sits between the other two ranges on most figures. Its double rail is 3mm shallower than either, its shelf is the longest and shallowest of the three, and its robe hook is neither the slimmest, Contura II at 23mm, nor the deepest, Riviere at 97mm. Choose Liano II when you want the stainless steel build and the 20 year line behind a mid-depth piece, Riviere for a deeper hook and shelf and Contura II for the slimmest hook.

A Liano II set room by room

Room Pieces Sizes to start with
Ensuite Single rail, robe hook, toilet roll holder 640mm rail, 57mm hook, 155mm holder
Powder room Hand towel rail or ring plus a toilet roll holder 293mm rail or 180mm ring
Family bathroom Double rail, hooks, double holder, shelf, soap dish 840mm double, 278mm holder, 493mm shelf
Shower Shelf, soap dish, bottle holder 493mm shelf, 193mm dish, 100mm bottle holder

A 840mm double rail carries two bars of 800mm between the fixing points, 1,600mm of bar in all, and the 640mm double carries 1,200mm. A family bathroom that needs towel space for several people should start from the 840mm double, and a narrow room from the 640mm single.

Build and fixing

Liano II is 304 stainless steel, the grade suited to a general home bathroom, and the pieces fix at three points for added strength behind a round plate 43mm across. Each rail arrives with its fixing kit and installation instructions. If your bathroom is by the sea and you want 316 stainless steel, look at stainless steel bathroom accessories for the ranges built in that grade.

Because the mount has three points, a rail needs a wall that can take all three fixings, so check the backing before you drill. Tile, plasterboard and timber each need the right fixing, and the plate covers the screw heads once the rail is up. Hold the rail level, mark the three points through the plate and drill from those marks.

Choosing the Liano II finish

Finish How it looks Suits
Chrome Bright and reflective, with a cool undertone Chrome taps and a classic bathroom
Matte Black Flat black Black tapware and white or light walls
Brushed Nickel Matte, soft silver-grey Brushed nickel taps and a quiet scheme
Gunmetal Very dark metallic grey, between steel and black Dark tapware and stone or concrete tones
Brushed Brass Warm and muted Warm tapware and timber
Brushed Bronze The bronze tone Bronze tapware, see Caroma brushed bronze

Match the finish name to the tap, because the same name sits in the same tone. A coloured finish is a coating over the stainless steel beneath it, so the choice of colour does not change the metal underneath. All six come with the same 20 year warranty line on the spec.

What Liano II does not include

This collection has no towel rack, no toilet brush holder and no glass shelf. If your bathroom needs one of those, take it from another range in the same finish name, and keep the plate shape in mind, because a round plate beside a square one shows two outlines on the wall. For other Caroma ranges, see Caroma bathroom accessories.

Planning heights and clear space

Put a towel rail's lowest bar between 900mm and 1200mm above the finished floor, and let the tallest user choose within that range. Hang a robe hook at 1500mm to 1700mm, rising to 1800mm for a robe that touches the floor, and a hand towel rail or ring at 1200mm to 1400mm. For the toilet roll, set the centre of the roll 660mm to 760mm up and 200mm to 300mm ahead of the front of the pan.

Allow 75mm clear in front of a single rail, hook or holder, 100mm in front of the shelf, dish or spare holder and 120mm in front of a double rail. The three-point fixing is made for added strength, so mark all three points from the piece itself before you drill. Draw the layout in masking tape on the wall first.

Liano II across the bathroom

Liano II accessories are made to match the Liano II bathroom collection in the same finish, so the taps, basin and accessories can share one colour. See Caroma Liano II for the range, Caroma bathroom accessories for the other Caroma ranges and bathroom accessories for every maker.

Fit check before you order

  • Choose the finish first, because every piece comes in all six.
  • Plan the wall from the overall length and drill from the fixing distance.
  • Allow 120mm for a double rail and 100mm for the shelf and dish.
  • Check the process: PVD, plated or electroplated, to suit your taps.
  • Take each height from the tiled floor.

Choose the finish, then the pieces, then the layout.

Frequently Asked Questions

How do I match bathroom accessories to my tapware?

The simplest approach is to buy your accessories from the same brand range as your tapware, many brands such as Phoenix, Caroma Urbane II, and Meir offer coordinated tap and accessory collections. If mixing brands, focus on matching the finish (e.g. brushed nickel or matte black) rather than the exact product range. Small variations in tone between brands are often barely noticeable in a finished bathroom.

What is the most popular finish for bathroom accessories in Australia?

Matte black has been the dominant finish for bathroom accessories in Australia for the past several years and remains very popular. Brushed nickel, brushed gold, and brushed brass are also strong choices for warmer or more luxurious interiors. Chrome remains the most versatile and classic option. For coastal homes, PVD-finished accessories offer the best long-term corrosion resistance.

What bathroom accessories do I need for a complete bathroom?

A fully equipped bathroom typically includes a towel rail or heated towel rail, a toilet roll holder, a robe hook (or hooks), a soap dish or soap dispenser, and a toothbrush holder. In the shower, a shower shelf or niche is essential. For a cohesive look, choose all accessories from the same range and finish, most Australian accessory brands like Nero, Phoenix, Meir and Caroma offer complete coordinating sets.

What is the difference between a towel rail and a heated towel rail?

A standard towel rail is an unheated, wall-mounted rail for hanging and airing towels. A heated towel rail incorporates an electric or hydronic heating element that warms the rail surface. Standard towel rails are more affordable and simpler to install, while heated towel rails add warmth and faster drying. Both are available in a wide range of finishes and sizes to match bathroom accessories.

What length towel rail do I need for a bathroom?

A single towel rail of 600mm suits a single person or couple. For family bathrooms, 750mm or 900mm rails or a multi-bar rail, provide more hanging capacity. Double bars allow two towels to be hung side-by-side without overlap. Measure the available wall space carefully and allow clearance on either side for a neat installation.

At what height should a toilet roll holder be installed?

The standard installation height for a toilet roll holder in Australia is approximately 650–700mm from the finished floor level, positioned to the side of the toilet at a comfortable reach. It should be installed 200–300mm in front of the toilet bowl. Always follow any specific recommendations from the manufacturer.

Where should robe hooks be installed in a bathroom?

Robe hooks are typically installed on the back of the bathroom door or on an adjacent wall near the entry. In an ensuite, hooks are often positioned inside the shower recess or near the towel rail area. Install at a height of approximately 1600–1700mm from the floor for adult use. Choose a number of hooks appropriate for the household, two hooks per user is a practical guideline.