Skip to content

Electronic Sensor Taps

28 Items

There are no products matching your search

View all products

Sensor taps buying guide


A sensor tap, also called a hands free tap, an automatic tap or a touchless tap, starts the water when your hands are under the spout and stops it when they leave. This page holds sensor basin mixers, sensor pull out sink mixers and sensor basin spouts, in chrome, matte black, brushed nickel, brushed brass, gold, bronze and gunmetal. The guide below explains how a sensor tap works, how it is powered, who it suits, and what to check about the fit before you order.

How a sensor tap works

An infrared sensor in the spout detects your hands. When it does, a small solenoid valve opens and the water runs. When your hands move away, the solenoid closes fully, so the tap does not drip and does not run on. There is no lever to touch, which is why these taps are popular where hygiene or ease of use matters.

Most sensor taps set the temperature before the water reaches the spout. You choose the temperature once, at installation, and the tap holds it. Some models also hold a fixed flow. That suits a basin you use for washing hands and rinsing, and it is worth knowing before you buy for a kitchen, where you may want to change the temperature as you work.

Battery or mains power

A sensor tap needs power for the sensor and the solenoid, and there are two ways to supply it. A battery model has a battery box that holds AA batteries, and it needs no power point under the basin. A mains model has a power adapter and a control box, and it needs a socket within reach of the cabinet. Both types have a control box or solenoid fixed under the basin, connected to the inlet and outlet hoses and to the sensor cable.

Choose battery power when there is no socket near the vanity, or when you want the simplest install. Choose mains power when the tap will be used heavily, because you will not have to change batteries. Check the product page for the power source of the exact tap, because it differs between ranges, and keep the manual for the battery type.

Who sensor taps suit

Sensor taps suit a few clear situations. Households with young children benefit, because small hands do not need to turn a lever, and because the water stops by itself if a child walks away. People with limited grip or movement find them easier to use than a lever. A busy kitchen suits one for rinsing hands while handling food. A powder room or guest bathroom suits one because visitors do not touch the tap. If you want a lever-based option for the same needs, see accessible taps.

Water use

Water runs only while your hands are in the sensing area, so no water flows while you soap your hands or brush your teeth. Fixed flow and a fixed temperature mean you do not waste water adjusting the tap. Most sensor taps on this page carry a 6 star WELS rating, and the label means a higher star count uses less water. Check the rating on the product page for the exact tap.

Sensor tap or lever mixer

Choose a sensor tap when touch-free use matters more than adjusting the temperature by hand. Choose a lever mixer when the basin is used for tasks that need changing temperature or flow, such as shaving, washing a baby or filling a bucket. A sensor tap also runs only while something is in the sensing zone, so it is less suited to filling a basin or a jug, and a basin with a plug and a lever mixer does that job better. For most households, the sensor tap works best on the powder room or guest basin and the lever mixer on the main vanity.

Sensing zone and placement

The sensor looks at a small area just below the spout. Position the tap so that area sits over the basin and not over the bench behind it, or the tap will react to anything near the spout. A tap too close to a wall or a mirror can also switch on by reflection, so leave a small gap behind the spout. Dark or shiny basins can change how the sensor reads, so test the tap before you fix the control box in place.

Sensor basin mixers

Most of the taps on this page are basin mixers, and they fit the single 35mm tap hole found on most Australian basins. They stand on the basin or the vanity top, and a few are wall mounted. Reaches run from about 118mm on compact spouts to about 235mm on long ones, and the height to the spout runs from about 105mm to 186mm. The water should land in the centre of the bowl, so match the spout height to the basin: a standard height for an undermount or inset basin, a tall spout for a bowl that sits on the bench. If you want a hand lever as well, see basin mixers.

Check the clearance to the mirror, shelf or splashback behind the tap, and leave room under the basin for the control box and the hoses. A cabinet with a drawer needs more planning, so measure the space before you order.

Sensor pull out sink mixers

A sensor pull out sink mixer brings hands free control to the kitchen, with a spout that also draws out on a hose for rinsing. It suits cooks who handle raw food and want to start the water without touching the tap. Check the spout height against any overhead cabinet and the reach against the sink, and see pull out sink mixers for the lever version of the same style.

Sensor basin spouts

Some sensor taps are outlet spouts only, set into the vanity top with the control box hidden below. They suit a clean, minimal basin and a modern vanity. Check the spacing from the back of the basin and the angle of the spout. If you want to compare other outlet styles, see spouts.

Hob mounted or wall mounted

Most sensor taps are hob mounted, which means they sit on the basin or the vanity top, and the plumbing comes up from under the vanity. This is the easier installation, because a plumber can reach the control box and hoses from below. A wall mounted sensor tap keeps the bench clear, and it needs the in-wall plumbing and the power or battery access planned before the tiles go on. Wall models are more complex to install, and a plumber should handle them.

Installation and the plumber

Replacing an existing basin tap is the simplest job: turn off the water supply, run the taps to drain the pipes, remove the old tap, pass the new tap's hoses and sensor cable through the hole, connect the control box and test the sensor. The old tap is often the fiddly part to remove, so allow time under the vanity. A licensed plumber should fit any tap, and a sensor tap with a mains adapter needs the power connection made safely. Read the instructions for the exact model before you begin.

Finishes and how they are made

Finish is the last decision, and it should match the other metal in the room. The finish process differs by colour. Chrome and matte black are electroplated, brushed nickel, brushed brass, gold, bronze and gunmetal are PVD, which bonds the colour to the metal and resists scratching and tarnish, and white is powder coated.

Keep one finish through the room, and limit it to two finishes at most, with one leading.

Body, lead-free rules and compliance

We recommend a solid brass body, and the sensor taps here are brass, with lead-free brass on some ranges. The National Construction Code limits lead in plumbing products that touch drinking water to 0.25 percent from 1 May 2026. Check WaterMark approval on the product page, because it affects legal installation in Australia. For the lead-free group across brands, see lead-free taps.

Caring for a sensor tap

Wipe the tap with a soft microfibre cloth and warm water, and keep the sensor window clean, because soap film or water marks on it can make the tap react late or not at all. Avoid bleach, harsh sprays and abrasive pads. If the tap starts to run weakly, replace the batteries first on a battery model. If the tap runs on or does not start, check the control box connection under the basin before you call a plumber.

What comes in the box

The contents depend on the model. A sensor basin mixer comes with the mixer tap, flexible hoses, a battery box or a power adapter and control box, installation instructions and an installation kit. A sensor pull out sink mixer comes with the mixer body, a base ring, a counterweight and a stabiliser. A sensor spout comes with the outlet and its control box. Read the product page for the exact list before you order.

Sensor taps by brand

The sensor taps on this page come from Nero taps and Caroma taps. Staying with one brand keeps the spout shape and finish consistent with the basin, shower and bath taps. For the wider group, see taps and bathroom taps and mixers.

Frequently Asked Questions

How does a sensor tap work?

A sensor tap uses an infrared sensor built into the spout or body to detect when a hand is placed underneath it. The sensor triggers a solenoid valve that opens to let water flow, and closes it again once your hand moves away, so there's no handle or lever to touch. Most units let you set a maximum run time so the tap shuts off automatically even if something is left underneath it.

Do sensor taps need a power source?

Yes. Sensor taps need power to run the sensor and solenoid valve, either from a battery pack (commonly AA batteries) or a mains-powered transformer, depending on the model. Battery-operated units are easier to install anywhere since they don't need a power point nearby, but the batteries do need periodic replacement, usually every one to two years depending on how heavily the tap is used.

What are the disadvantages of sensor taps?

The main drawbacks are the added complexity and cost compared with a standard mixer, since there's a sensor and valve to maintain rather than just a cartridge. Battery-operated units need the batteries changed periodically, and if a battery dies unexpectedly the tap stops working until it's replaced. Sensor taps can also occasionally trigger on nearby movement rather than a hand underneath, though this is uncommon on a well-calibrated unit.

Are sensor taps any good for home use, or are they mainly for commercial bathrooms?

Sensor taps are most common in commercial and public bathrooms because they reduce cross-contact on shared fittings, but they suit home use too, particularly in households where hygiene or accessibility is a priority, such as kitchens during food prep or bathrooms used by people with limited hand strength or dexterity. For a typical home bathroom or kitchen, they're a genuine option rather than a purely commercial fitting.

What are the hygiene and water-saving benefits of sensor taps?

Because there's no handle to touch, sensor taps reduce the spread of germs between users, which is the main reason they're standard in commercial and healthcare settings. They also tend to save water in everyday use, since the tap only runs while a hand is actually underneath it and shuts off automatically rather than being left running, which can happen with a manual tap.

Can a sensor tap be installed by a home plumber, or does it need a specialist?

A licensed plumber can install a sensor tap, the plumbing connection itself is the same as any other tap. The main extra consideration is the power supply, running a mains transformer needs an accessible power point or cabling run, while a battery-operated unit avoids that but needs the battery compartment to stay accessible for future replacement. Confirm which power option suits your bathroom or kitchen layout before choosing a model.