Skip to content

Fienza Eleanor

0 Items

Whoops, there are none available in your area

View all products

Fienza Eleanor modern vintage tapware, mixers and bath filler


Eleanor is the Fienza range for a bathroom that wants a vintage look with the controls of a modern mixer. The handle has a classic lever shape, the spouts curve like a gooseneck or a Shepherd's Crook, and the body is brass with a European cartridge inside, so the tap works smoothly with one hand. It is made in chrome, matte black and brushed nickel, with a white ceramic handle or a matching metal handle.

People search for the range as Fienza Eleanor, Fienza Eleanor tapware, Eleanor tapware and Fienza modern vintage. This page covers the mixers, the wall controls and the floor mounted bath filler, with the sizes and ratings that decide whether each piece fits your room.

The modern vintage style

A vintage bathroom usually means separate hot and cold taps. Eleanor keeps the period look but combines the controls in one lever, so there is one handle to lift and turn, and the water temperature is set in a single movement. The spout is the old-fashioned part: it is tall and curved, and it swivels. The result suits a heritage bathroom, a Hampton bathroom, a farmhouse room, or a modern room that needs one softer feature.

Because the lines are curved, the tap looks best with a round or oval basin, a framed mirror and soft, plain tiles. A square basin and flat panels fight the curves, and a square range would sit better in that room.

Handles and finishes

Every finish comes with a choice of handle. The white ceramic handle is the traditional look and gives the tap a two-tone appearance against the metal body. The metal handle matches the body, so the tap reads as one colour. Choose ceramic for a heritage room and metal for a cleaner, more modern one.

Finish Handle options Coating Works with
Chrome White ceramic or chrome Electroplated White tiles, classic and heritage rooms
Matte black White ceramic or matte black Electroplated, which makes it more resilient Pale walls, timber and farmhouse rooms
Brushed nickel White ceramic or brushed nickel PVD, a coating bonded to the brass in a vacuum chamber Stone, warm white and grey tiles

Keep the metal the same on every piece in the room. If the basin mixer has a ceramic handle, give the wall mixer a ceramic handle too, so the whole bathroom reads as one set. The wider brand is in Fienza taps.

Basin mixers

Eleanor has two basin mixer shapes. Both are single lever mixers in brass with a swivel spout, rated WELS 5 star at 5.5 litres a minute.

Mixer Projection Height Width Shape
Gooseneck basin mixer 200mm 264mm 105mm A tall arch that rises, then falls into the basin
Shepherd's Crook basin mixer 209mm 233mm 105mm A curved crook that reaches out over the bowl

The brushed nickel gooseneck has a 161mm spout reach and a 168mm height to the spout, on a 264mm overall height and a 200mm depth. These are the numbers to check against the basin. The water must land inside the bowl, so compare the reach against the distance from the tap hole to the centre of the plug. The height to the spout must clear the rim of the basin and leave room for a hand under the spout, which on an inset basin is easy and on a vessel basin needs a taller mixer.

Both spouts swivel, which helps when you wash a larger item in the basin or fill a jug. The mixers use a European ceramic cartridge in lead free brass, and the gooseneck has a 40mm cartridge and PEX split-resistant flexible hoses. They are suitable for mains pressure, with a maximum of 500 kPa, which is the normal supply in most Australian homes. A gravity-fed or tank supply needs a plumber's advice before the mixer is chosen. The mixer needs one tap hole in the basin or the bench.

Wall mixers

The Eleanor wall mixers are made for a shower or a bath. Each is a two part design: an in-wall kit that goes behind the tile and a handle and dress plate that fit on the front. The in-wall kit is in the box, so the plumber and the tiler have everything they need.

Wall mixer Projection Height Width Controls
Wall mixer 85mm 136mm 115mm One outlet, such as a shower or a bath spout
Wall mixer with diverter 85mm 183mm 160mm Two outlets, such as a shower head and a bath spout

A diverter lets one mixer feed two outlets, and the lever on the diverter sends the water to the shower head or to the spout. Choose the plain wall mixer when the wall carries one outlet, and the diverter mixer for a shower over a bath. The diverter plate is taller and wider, so it needs more clear wall around it.

Shower and bath taps do not need a WELS rating under the standard, so the rating sits on the shower head instead. The body goes into the wall before the lining, so decide the position and the finish while the wall is still open. A plumber should install the in-wall kit, and the handle and plate go on last. See wall top assemblies for other wall controls and Fienza showers for the heads and rails.

Floor mounted bath mixer

The floor mounted basin and bath mixer is for a freestanding bath. It stands 1042mm tall, with a 920mm height to the spout and a 287.5mm depth, and the spout swivels. It is rated WELS 3 star at 8.5 litres a minute, and it comes with a free-flow aerator for use on a bath, so the bath fills quickly. It uses a 35mm cartridge in lead free brass.

The mixer stands on the floor beside the bath, so the pipework must come up through the floor at the right place. Plan the bath position and the pipe position before the slab or the sub-floor is finished. The spout reach must land inside the bath, so check the distance from the mixer to the centre of the bath. A taller bath needs a taller spout, and a wide bath needs a longer reach.

What the ratings mean

The WELS star rating shows how much water a tap uses. A 5 star basin mixer at 5.5 litres a minute uses less water than a 3 star fitting at 8.5 litres, so the basin mixers save water at the basin, where the tap runs often and briefly. The floor mounted bath filler is rated lower because a bath needs a fast flow, and the free-flow aerator in the box lets it fill at that rate. Wall mixers for a shower or a bath carry no rating, because the standard does not require one for shower taps, and the shower head carries it.

What is in each box

Piece In the box
Basin mixers The mixer, an installation kit and installation instructions
Wall mixer A handle, a dress plate, an in-wall kit and installation instructions
Wall mixer with diverter The shower and bath mixer, a handle, a dress plate, an in-wall kit and installation instructions
Floor mounted mixer The bath filler, with a free-flow aerator for a bath

Check the contents against the parts list before the plumber starts. The wall mixers need the in-wall kit to be fixed before the tiles, and the handle and the dress plate go on afterwards.

Choosing the mixer

Your room Choose Why
Vanity with an inset basin Shepherd's Crook basin mixer A lower profile at 233mm that reaches out over the bowl
Larger basin or a deeper bowl Gooseneck basin mixer A taller arch at 264mm with more clearance under the spout
Shower only Wall mixer One outlet and a small plate
Shower over a bath Wall mixer with diverter Two outlets on one lever
Freestanding bath Floor mounted mixer A tall spout at 920mm that stands clear of the bath

Planning an Eleanor bathroom

Start with the basin and the bath, because they set the mixers. Choose the basin mixer for the basin, then the wall mixer for the shower or bath, and then the floor mixer if there is a freestanding bath. Choose the finish and the handle once, and use it for every piece. If the room has a heated towel rail, a hook or a shelf, match its finish to the tapware.

The in-wall bodies and the floor pipework are the parts that cannot be moved later. Settle the positions with the plumber before the tiles go on. Keep the basin mixer's tap hole in the middle of the basin or the bench, and leave room behind it for the lever to lift.

Because the range is curved and traditional, give it room. A small bathroom with a lot of fittings can look crowded, and a plain wall behind the basin lets the spout stand out. Pair it with a shelf or a rail in the same finish. See Fienza bathroom accessories for matching pieces from the same brand.

Fitting and care

A plumber should install every mixer. The basin mixers come with an installation kit and the wall mixers with an in-wall kit, so check the box against the parts before the plumber starts. Wipe the finishes with a soft cloth and warm soapy water, then rinse and dry. Avoid abrasive pads, bleach and harsh cleaners. Wipe a brushed finish along the grain, and wipe the ceramic handle with the same soft cloth. In a hard water area, dry the tap after use, because water left on the surface leaves marks. Clean the aerator if the spray turns uneven.

The matte black finish is electroplated, which makes it more resilient than a painted black, but it still shows wear faster than chrome. Treat it gently, and wipe it with a damp cloth rather than a cleaner.

Before you order

Check the supply is mains pressure, and check the tap hole count in the basin. Compare the spout reach and height against the basin or the bath. Decide between a ceramic handle and a metal handle. Confirm the finish for every piece in the room, and settle the position of the wall mixer and the floor pipework with the plumber before the walls and floors are finished.

Frequently Asked Questions

How do I know which basin mixer is right for my basin type?

The key factor is the height and style of your basin. For standard inset or semi-recessed basins, a regular deck-mounted basin mixer with a spout height of around 100–140mm works well. However, if you have an above-counter or vessel basin, where the bowl sits on top of the benchtop, you will need a tall basin mixer with a spout height of 180mm or more, otherwise the spout will sit below the basin rim and water will splash onto the benchtop. Wall-mounted mixers offer another option for above-counter basins, with the height controlled by your rough-in position. Always confirm basin rim height before purchasing your tapware.

What is a WELS rating and does it matter when choosing a basin mixer in Australia?

The Water Efficiency Labelling and Standards (WELS) scheme is a mandatory Australian government rating system that measures how water-efficient a tapware product is. Ratings run from 1 to 6 stars, the more stars, the less water the tap uses per minute. For basin mixers, a 5 or 6-star WELS rating is considered excellent and translates to meaningful long-term savings on water bills, particularly important in drought-prone Australian states. All tapware sold in Australia must carry a WELS rating, and most reputable brands now offer basin mixers rated 4 stars or higher as standard. Look for the WELS label on the product or packaging before you buy.

What is the difference between a bath mixer and a basin mixer?

While bath mixers and basin mixers may look similar, they are not interchangeable. The key technical difference is the water supply connection size. This difference matters because filling a bathtub requires a significantly higher flow rate, a basin mixer simply cannot deliver water fast enough to fill a bath in a reasonable time. Always use tapware specified for bath applications when fitting out a bath, and consult your plumber if you are unsure.

What is a shower mixer and how does it work?

A shower mixer (or shower tap) is the control valve that regulates the flow and temperature of water to your shower. A single-lever mixer controls both temperature and flow with one handle. A thermostatic mixer maintains a pre-set water temperature even if pressure changes elsewhere in the system, a safer and more convenient option, particularly for households with children. Shower mixers in Australia must comply with AS 3718 standards.

What is a rail shower and why is it popular in Australian bathrooms?

A rail shower (also called a slider rail shower or shower rail kit) includes a hand shower mounted on an adjustable rail, allowing users to slide the shower head up or down to their preferred height. Rail showers are among the most practical and versatile shower options available, they suit users of different heights, are ideal for bathing children, and are easy to use for rinsing down shower walls. They are widely used in family bathrooms across Australia.

What is a rail shower with overhead and how does it work?

A rail shower with overhead shower combines a fixed overhead shower head at the top of the rail with a sliding hand shower below. A diverter valve (either integrated into the rail or fitted separately at the mixer) allows you to switch water flow between the overhead and the hand shower. This combination delivers the best of both worlds, the immersive feel of a rain shower with the flexibility of a hand shower.

What is the Fienza Eleanor range?

Eleanor is a named tapware range within the Fienza brand, built around a soft, rounded design with simple, clean detailing rather than the more ornate styling of some of Fienza's other traditional-leaning ranges. It typically spans basin mixers alongside matching bath and shower tapware designed in the same line. For Fienza's tapware range as a whole, see Fienza taps.

How does Eleanor differ from Fienza's Lillian range?

Both sit toward the classic end of Fienza's design range, but Lillian leans into more detailed, traditional-style handles and a rounder body, while Eleanor keeps a plainer, more understated silhouette. Neither is a straight substitute for the other, the choice comes down to how much detail you want the tapware to carry. See Fienza Lillian for that range specifically.

What finishes does the Eleanor range come in?

Ranges like Eleanor are typically offered across Fienza's standard finish set, polished chrome as the baseline, with matte black and warmer metallic options such as brushed nickel or brushed gold often available depending on the specific product. Check current stock for the exact finish you need.

What should I check before buying an Eleanor basin mixer?

Confirm the spout height suits your basin type, a standard inset basin needs a regular height mixer, while an above-counter or vessel basin needs extra height to clear the rim. Also check the mixer carries a WELS water efficiency rating and that the single tap hole configuration matches your benchtop or basin.

Does the Eleanor range include bath and shower tapware as well as basin mixers?

Named ranges are generally offered across multiple applications, basin mixers, and often bath and shower mixers too, sharing the same design language so the look can be carried consistently through a bathroom. Check which specific products within Eleanor are available for the fixture you're fitting out, since coverage can vary by category within any one range.

Is Fienza Eleanor tapware suitable for a full bathroom renovation?

Its coordinated basin, bath and shower tapware makes it straightforward to keep one consistent look across a bathroom's core fixtures. As with any range, it's worth checking WELS rating, finish availability and warranty terms on the specific products before committing a full renovation to it.