Skip to content

Fienza Kaya Heated Towel Rails

0 Items

Whoops, there are none available in your area

View all products

Fienza Kaya heated towel rails buying guide

The Fienza Kaya is a round bar heated towel ladder in 304 stainless steel, in three sizes and five finishes. For most bathrooms the right call is to choose the size from the wall first, then the finish from the tapware. The 4 bar suits a small space, the 6 bar a standard wall and the 9 bar a tall wall. Every Kaya is 600mm wide, rated IP55, SAA approved and wired concealed. This guide sets out the sizes, the power each one draws, the wiring, the finishes and how to look after them.

The three Kaya sizes

Kaya ladder Size Power Suits
4 bar 600mm wide, 450mm high, 100mm deep 230V, 47.5 watts, IP55 An ensuite or powder room, and one towel
6 bar 600mm wide, 800mm high, 100mm deep 230V, 75 watts, IP55 A standard bathroom wall
9 bar 600mm wide, 1200mm high, 100mm deep 230V, 110 watts, IP55 A tall wall in a shared bathroom

A ladder gives a towel more contact with the heated bars than a single bar does, so it dries and warms a towel more evenly. The surface temperature runs between 35 and 60 degrees, which is enough to dry a towel and keep it warm. A heated towel rail is not a room heater, so a bathroom that needs warm air also needs a ceiling heater or underfloor heating. The bathroom heating and ventilation collection covers both.

Choosing the size

More bars means more hanging space and more output, and the Kaya output rises with the bar count: 47.5 watts for 4 bars, 75 watts for 6 and 110 watts for 9. The width stays at 600mm on every size, so the choice is the height of the wall.

  • A short wall of about 450mm: the 4 bar, for one towel.
  • A standard wall about 800mm high: the 6 bar, for two or three towels.
  • A tall wall about 1200mm high: the 9 bar, for a family or shared bathroom.

Measure the wall before you choose the ladder. Leave clear wall above and below the rail so air moves around the towels, and leave room for the connection at the top right or bottom left corner.

Because every size is 600mm wide, two Kaya rails side by side take 1,200mm of wall, whichever sizes you pick. A 9 bar next to a 4 bar is 1,200mm wide, and so are two 6 bars. A pair suits a shared bathroom where each person wants a rail of their own, and the wattage simply adds up: a 6 bar and a 4 bar together draw 122.5 watts. The heated towel ladders collection compares ladders across the full range, and the round heated towel rails collection groups the round bar styles.

How much heat per bar

Divide each size's wattage by its bar count and the answer is almost the same every time: 47.5 watts over 4 bars is 11.9 watts a bar, 75 watts over 6 is 12.5 watts a bar, and 110 watts over 9 is 12.2 watts a bar. A bar on the 9 bar ladder heats the towel about as strongly as a bar on the 4 bar. That settles the choice between sizes. You are buying hanging space and wall height, not a warmer rail, so choose the size that holds your towels and fits the wall, and do not step up in size for extra warmth.

The wattage of a Kaya is the total the whole rail draws when it is on, not the figure for each bar. Use the table further down to turn that total into kilowatt-hours for the hours you run it.

Electrical load for your electrician

Current in amps is watts divided by volts. At 230 volts a 4 bar Kaya draws 0.21 amps, a 6 bar draws 0.33 amps and a 9 bar draws 0.48 amps. These are small loads, and a pair of rails on one circuit adds up to well under one amp: a 9 bar and a 6 bar together draw 0.8 amps. Your electrician sizes the circuit and the protection for the whole bathroom, so give them the rail sizes you have chosen before the walls are lined. If you plan a timer or a controller, tell them as well, because the timer sits in the supply to the rail.

Wiring

Every Kaya has concealed wiring and is hardwired. The wiring position is at the top right or the bottom left mounting point, so the cable has to reach one of those corners. A licensed electrician makes the connection, because a hardwired rail has no plug. Decide which mounting point the cable will use before the wall is set out, and have the cable positioned in the wall at that corner. If the supply comes up from below the rail, the bottom left corner is the natural choice. If it comes down from above, use the top right corner. Either way, mark the corner on the plan so the cable is not run to the wrong side before the wall is lined. Ask your electrician where in the bathroom a rail rated IP55 can be placed. The 240V heated towel rails collection explains which mains-powered rails plug in and which are hardwired only, and the Kaya is hardwired only.

Finishes

The Kaya comes in five finishes, so the rail can match the tapware already in the room. They are applied three different ways, which is worth knowing before you choose.

Finish How it is made Sizes Finish collection
Brushed nickel PVD coating 4, 6 and 9 bar Brushed nickel heated towel rails
Chrome Electroplated 4, 6 and 9 bar Chrome heated towel rails
Gun metal PVD coating 4, 6 and 9 bar Gunmetal heated towel rails
Matte black Powder coated 4, 6 and 9 bar Black heated towel rails
Urban Brass PVD coating 4, 6 and 9 bar Brass and gold heated towel rails

Brushed nickel, gun metal and Urban Brass are PVD coatings on the stainless steel, chrome is plated, and matte black is a powder coat. Each needs the same gentle care, set out below. If the finish on the rail is the one your tapware uses, the rail will sit with it as part of one set. If the finishes are close but not the same, choose the finish that already dominates the room, because a heated rail is the largest piece of metal on the wall.

When you match a rail to an existing room, the Fienza product code for the 9 bar in each finish is a quick check: 82860120 in chrome, 82860120BN in brushed nickel, 82860120UB in Urban Brass, 82860120MB in matte black and 82860120GM in gun metal. Colour on a screen varies from the product, so compare the finish name and code against the tapware you already have, and match the finish to a sample in daylight if you can.

What a Kaya uses

Divide the rail's wattage by 1,000, then multiply by the hours it runs to get kilowatt-hours.

Kaya ladder 3 hours 6 hours 24 hours
4 bar, 47.5 watts 0.14 kWh 0.29 kWh 1.14 kWh
6 bar, 75 watts 0.23 kWh 0.45 kWh 1.8 kWh
9 bar, 110 watts 0.33 kWh 0.66 kWh 2.64 kWh

A rail left on for 24 hours uses four times as much as one on a six hour timer. Most households need heat in two windows, a morning shower and an evening one. Take a 6 bar running 2 hours in the morning and 3 hours in the evening: that is 5 hours a day at 75 watts, or 0.375 kWh a day and 2.63 kWh over a week. The same routine on a 9 bar is 0.55 kWh a day and 3.85 kWh a week, and on a 4 bar it is 0.24 kWh a day and 1.66 kWh a week. A timer keeps the running hours to the ones that count, and the controllers and thermostats collection holds timers for heated rails.

Caring for the finish

Clean a Kaya with mild soapy water and a microfibre cloth, using light pressure and wiping in one direction only. Do not use harsh detergents, bleach, cream cleaners or citrus based cleaners. These are abrasive and damage the surface, whichever finish you chose. In a highly polluted or coastal location, clean the rail two to three times a week, because the finish needs more frequent cleaning there. Switch the rail off and let it cool before cleaning it.

A rail is hot to the touch at the top of its range, so supervise young children near it.

Matching the rest of the Kaya bathroom

The Kaya name runs through more than the towel rail. If you are fitting out a bathroom in the same style, the Fienza Kaya range groups the whole line, Fienza Kaya bathroom accessories holds the matching accessories that are not heated, Fienza Kaya taps covers the taps, and Fienza Kaya showers covers the shower fittings. Check that the finish on each piece is the one you chose for the rail, since the same finish name should be used across the room for a set that matches.

Where to go next

The heated towel rails collection compares every brand, size, finish and voltage together.

Frequently Asked Questions

What is Fienza Kaya, and does it include a heated towel rail?

Kaya is one of Fienza's named ranges, generally recognised for its rounded, softer profile across tapware and accessories. A heated towel rail styled to the Kaya range sits within that broader collection, designed so its finish and form coordinate with other Kaya-range tapware and accessories chosen for the same bathroom, rather than being a standalone accessory line.

Do I need to buy other Kaya products to use the Kaya heated towel rail?

No, a Kaya heated towel rail works as a standalone fitting and doesn't require other Kaya-range products to function. Buyers typically choose it alongside Kaya tapware or accessories for a coordinated look, but there's no functional requirement to purchase the wider range if the towel rail is all you need.

What finishes is the Fienza Kaya heated towel rail available in?

Finish availability changes over time, so it's worth checking the current Kaya heated towel rail listing directly rather than assuming a specific finish is in stock. In general, Fienza designs its named ranges, Kaya included, across a consistent set of finishes so tapware and accessories can be matched within the one range.

Does a Fienza Kaya heated towel rail need a licensed electrician to install?

It depends on the connection type rather than the range. A plug-in rail that connects to a standard power point can usually be installed without an electrician, provided the point is correctly placed for the bathroom's wet zones. A hardwired rail, wired directly into the mains with no visible plug, must be installed by a licensed electrician under Australian electrical safety rules, the same requirement that applies to any hardwired towel rail regardless of range.

How much does it cost to run a Fienza Kaya heated towel rail?

Running cost depends on the specific model's wattage and how many hours a day it's switched on, not the range name. Most electric heated towel rails, Kaya included, draw somewhere between 60W and 150W, broadly comparable to a household light bulb, so running one for a couple of hours a day is a modest addition to a power bill. Fitting a timer so it only runs when needed is the simplest way to keep that cost down.

Is Fienza Kaya a budget or premium range?

Kaya generally sits within Fienza's mid-range positioning, offering a considered design profile without the price point of a premium designer range. As with any range, it's worth checking the specific wattage, IP rating and warranty terms of the heated towel rail itself rather than judging quality purely on where the range sits in the catalogue.