Skip to content

Freestanding Baths

0 Items

Whoops, there are none available in your area

View all products

Freestanding baths buying guide


A freestanding bath stands clear of the walls and is finished on every side, which is the whole appeal and most of the planning. It can sit under a window or in the middle of a room, and it can move if the layout changes. It also needs more floor than an inset bath, more care with the plumbing, and a floor that can carry it. This page covers the freestanding baths at The Blue Space in oval, rectangular and round shapes, in acrylic, solid surface and stone. Below, the room, tapware, waste, floor and comfort questions are taken in the order they come up when you choose one.

Does the room suit a freestanding bath?

Room width decides this before style does. A bathroom under about 2.4m wide usually rules out a true freestanding bath with proper clearance, and a freestanding bath is at its best in a bathroom 2.8m wide or more. In an en suite 2.3m wide, a freestanding bath can narrow the walkway to under 500mm. For a narrower room, back to wall baths keep the shape and sit flush to one wall, and the bathtubs page compares every installation type.

Ease of cleaning matters more than looks. A freestanding bath is worth considering only if there is room to mop around it and wipe every external side.

Clearance around the bath

Plan clearance by what you need to do. Leave 200mm to 300mm clear on three sides and 600mm at the entry end for walking past and stepping in and out. Leave 50mm to 100mm around the bath for cleaning, with 700mm to 900mm of clear floor in front. Leave at least 100mm around the edge where a freestanding mixer stands, and 100mm to 150mm behind the bath. The figures answer different questions: reaching a cloth behind the bath, walking past it, and fitting a mixer beside it. Plan on the larger figure where the room allows, and treat the smaller ones as the least you can live with. Keep the bath from blocking doors or windows.

Sizes, shapes and depth

The freestanding baths here run from 1300mm to 1800mm long. Widths run from about 700mm to 900mm, and round baths are wider still. Heights run from about 420mm for a low solid surface bath to 750mm for a tall acrylic one, and inner depth runs from 410mm to 490mm. Most are oval, with a smaller group of rectangular baths and a few round ones. The round baths page gathers those, and the corner baths page covers baths shaped to fit a corner.

Several shapes are worth knowing by name. The Kaskade Naomi is a slipper bath with a raised backrest, 1700mm long, 780mm wide and 660mm high. The Fienza claw foot bath is a traditional slipper shape with a roll top edge. The Kaskade Alice is egg shaped with a thin 15mm rim, 1700mm by 860mm. The Turner Hastings Claremont is double ended, with an overall length of 1704mm and a bottom length of 1475mm, which tells you the usable floor of the bath is shorter than the headline length. The Decina Cosmo is a Japanese style soaking bath only 1300mm long, with a raised backrest and a deeper interior, and its smaller internal surface area helps the water stay warm.

Depth matters more than length for comfort. About 450mm to 480mm of internal depth is a good middle. Look for a gentle backrest and wider edges that can work as armrests or a ledge. If two people share, choose a centred waste with even slopes at both ends. Compare those numbers with the inner depth of the bath, and ignore the overall height, which includes the rim and the feet.

Materials and what they weigh

Acrylic is the most common material on this page. It has a non-porous surface that wipes clean, a steel support frame in many of them, and adjustable legs for levelling. Acrylic weights run from the high 30s in kilograms to about 75kg. The BelBagno Palermo has an acrylic thickness of 3.8mm and is reinforced with fibreglass in five layers, which is the kind of detail worth comparing between acrylic baths.

Solid surface and stone baths are heavier and hold heat longer. Kaskade, Fienza and Turner Hastings baths weigh from about 50kg up to 154kg empty, with capacities up to 602 litres. Browse stone baths for the heavy end and acrylic bathtubs for the lighter one. Fienza stone baths weigh in excess of 150kg, while the Kaskade baths run from about 96kg to 154kg, so read the weight from the bath's own page and not from the material.

Acrylic freestanding baths in practice

Three acrylic baths show how much the details differ. The Caroma Contura II 1700mm bath has a thin rim, an inner depth of 430mm, a 338 litre capacity, a 40mm waste size and no overflow, and its box holds footlocker fittings, installation instructions and a fixing kit. The Decina Caval is a different shape, with a sloped profile and a high reclining backrest, and it stands 680mm high. Its waste is at the end of the bath where the others have it in the centre, and it meets Australian Standard 1172.5:2019. The Decina Oxford is a freestanding bath made to stand against a tiled wall. It has an integrated overflow, a full internal steel frame with height adjustable legs and a 1700 by 800 by 600mm body holding 174 litres, and it suits two bathers.

Solid surface, stone and mineral composite baths

The stone group is more varied than the name suggests. Kaskade stone baths are made from pure resin and sedimentary rock, with a thin 15mm rim on the Alice and Lucia models and a 95mm void under the bath for plumbing. The Kaskade Lucia 1400 weighs 86kg with a 314 litre capacity and a 420mm inner depth, and the 1700mm Alice weighs 116kg with a 510 litre capacity and a 450mm inner depth. Fienza cast stone is moulded in one piece with no joins, does not yellow or crack and can be sanded and refinished. TitanCast is solid surface that is non-porous and solid throughout, so scratches can be buffed out, and the 1800mm Camden is 137kg and 250 litres. The Turner Hastings Claremont is made of a different material, MagnaCast mineral composite, and weighs 150kg.

Models that suit different rooms

The Decina Valentina is a smooth oval in high gloss white in 1500mm and 1700mm, both 800mm wide and 600mm high, made to Australian Standard AS1172.5:2019 with adjustable self-supporting feet. The Otti Hampton is 1700mm by 800mm by 560mm in gloss white with an integrated overflow. The Otti Attica Bondi is a 1700mm matte white bath, 800mm wide and 580mm high, with an overflow and a finish that resists watermarks, and its back to wall style helps reduce hard-to-clean gaps. The Clark Round is a 1600mm freestanding bath in sanitary grade acrylic, with or without an overflow and with footlocker fittings included for stability, and a back to wall version has a shelf where you can rest a glass.

Floor load

A freestanding bath puts a lot of weight on four small feet. Water adds roughly 1kg per litre, and the load with a bather can reach 400kg to 500kg. Timber floors usually need reinforcement for heavy baths, such as blocking between joists, a secondary frame or a manufacturer's steel support frame. A structural engineer should assess the floor where the combined load goes above about 300kg. Acrylic is lighter, which matters on upper floors, and solid surface may need floor reinforcement upstairs.

Where the pipes go

Water supply has two routes. A floor mounted mixer takes its pipes up through the floor, and a wall mounted spout takes them through a wall. Floor flanges should be fixed to the structural floor, not just the tile, and the supply pipes should be pressure tested before the floor finish goes on. A floor mounted spout needs precise positioning before tiling, which is why tapware is chosen before the bath is fixed. Confirm the tap hole position matches the chosen tap before ordering, because changing it after delivery is costly. The freestanding bath mixers collection shows the floor mounted options.

Overflow, waste and plug

The overflow line decides which waste you need. A bath with an overflow takes an overflow waste, and a non-overflow bath takes a waste without one. The Turner Hastings Kirkham Ball needs a 40mm waste with overflow, and the Turner Hastings Claremont needs a 40mm waste without overflow. Many baths are sold with the plug and waste separate, while some include a chrome pop-up waste, such as the BelBagno Berg and the Fienza claw foot bath.

Many freestanding baths here include an integrated overflow, and others are non-overflow only. An overflow that is included is built into the bath body, so read that line before ordering the waste. Australian building codes require a fully removable bath waste in some situations, so ask a plumber before purchase. The bath wastes collection has the pop-up and pop-down options.

Tapware for a freestanding bath

A freestanding bath needs a floor mounted spout or mixer, or a wall mounted set if the bath sits close enough to a wall. Leave at least 100mm clear around the bath edge for a freestanding mixer. A wall mounted spout with a long reach can work if the bath is positioned close enough. A bath near a wall can need a spout arm of nearly 350mm, so check the reach against the spout before choosing the position.

Care

Care follows the material. Rinse after each use, wipe with a soft sponge or microfibre cloth and a pH neutral cleaner, and avoid bleach, ammonia, abrasive powders and steel wool. Give the bath a weekly deeper clean and a monthly look at the waste, overflow and silicone seals. A freestanding bath has more surface to dry, so a quick wipe of the sides after use keeps soap marks from setting. Fienza cast stone does not yellow or crack and can be sanded and refinished, which is worth knowing for a scratch.

Choosing between the options

Start with the room: measure the width, then the clearance you want, then the floor. If the room is wide enough and the floor can carry it, pick the material for the soak and the weight, and read the product page for depth, overflow and waste. If the room is not wide enough, a back to wall bath gives the same look with less floor, and the full range of bathtubs covers the other types.

Frequently Asked Questions

Is a freestanding bath a good idea?

It's a good option if the bathroom has the floor space and the plumbing can be routed to suit, but it's not automatically the right choice for every layout. The main practical trade-offs against a back-to-wall or built-in bath are that a freestanding tub needs floor clearance on all sides, doesn't need any tiled surround, and its plumbing (tap set and waste) has to be finalised before the floor is laid rather than hidden in a wall cavity. If the room is tight, a back-to-wall bath often gives a similar look with fewer planning constraints.

What should I look for when choosing a freestanding bath?

Material, internal depth and floor plan are the three practical factors, more than brand. Acrylic is lighter, cast stone or stone resin is heavier and feels more substantial but adds real weight the floor needs to support. Internal depth affects how much water covers you when seated, and the external footprint needs to be checked against your bathroom's actual clear floor space, including a walking margin on the sides that will be visible.

What makes a freestanding bath comfortable to use?

Internal depth and backrest angle matter more than external shape. A deeper internal profile means more of your body sits below the waterline, and a sculpted or angled backrest section supports reclining better than a flat vertical wall. These specifications are listed per model, so it's worth comparing internal depth and seat angle directly rather than judging comfort from the outside dimensions alone.

How does material change a freestanding bath?

Material is the biggest factor. Acrylic freestanding baths are lighter, while cast stone, stone resin and composite stone versions are heavier and are made differently. Two freestanding baths of the same length can differ substantially depending purely on what they're made from, so compare finish and construction, not just length.

Does a freestanding bath need special plumbing?

Yes, this is the main planning difference from a wall-based bath. Because there's no wall cavity behind it, tapware is either wall-mounted at a confirmed position or floor-mounted, supplied through pipework brought up through the floor before it's finished. A floor waste (rather than a wall-concealed waste) is typically required directly under or near the bath. All of this needs to be set out with a licensed plumber at the framing stage, since moving it later means cutting into a finished floor.

Do freestanding baths need extra floor support?

It's worth checking, especially upstairs or on a suspended timber floor. A full bath of water plus a person is genuinely heavy, often well over 200kg combined, and because a freestanding bath isn't braced against a wall, that weight sits as a more concentrated point load on the floor structure rather than being partly carried by wall framing. For upper-storey installations or older subfloors, get a builder or engineer to confirm the floor can take a filled bath before installing a heavier stone or stone resin model.