Skip to content

Martec Polo Ceiling Fans

0 Items

Whoops, there are none available in your area

View all products

Martec Polo ceiling fans buying guide


The Martec Polo is a 1320mm (52 inch) DC ceiling fan in matt white, matt white with walnut-look blades, or nickel with driftwood-look blades, with or without an integrated LED light. Shoppers who find this page often arrive from searches such as "martec flush ceiling fan", so one point comes first: the Polo is not a flush fan. Its overall height is 335mm, which makes it a standard-mount fan. The rest of this guide covers the specification and ceiling clearance, then the light, the controls and care.

Is the Polo a flush fan?

No. A hugger or flush fan sits tight to the ceiling with no rod, and the Martec fan built that way is the Metro, at 210mm to 222mm on a flat ceiling only. The Polo hangs 335mm below the ceiling and takes up to 12 degrees of pitch. Anyone with a low ceiling should start with Martec Metro ceiling fans or low profile fans. The Polo suits a standard ceiling with a little headroom to spare.

Polo specification

  • Span: 1320mm, or 52 inch.
  • Motor: brushless DC, 36 watts at maximum.
  • Construction: steel body and canopy with ABS blades, and a 150mm canopy.
  • Ceiling pitch: up to 12 degrees.
  • Overall height: 335mm.
  • Settings: eight, among them comfort sleep, breeze and reverse modes.
  • Light version: a dimmable LED of 2,500 lumens with adjustable colour temperature.
  • Control: a remote and receiver in the box, with Wi-Fi control through the Smart Life app.
  • Weight: about 6.2 kilograms. Usage line: indoor.

Finishes and the look

Matt white blends into a light ceiling, and the walnut and driftwood blade finishes bring a timber tone to the white or nickel body. Both are finishes on ABS blades. Many wood-look blades are plastic, and the Polo has ABS blades. Check the tone against the floor and furniture in the room, because mismatched wood tones can clash, and note that colour has no effect on airflow. See white ceiling fans and woodgrain ceiling fans.

Ceiling height and clearance

Blades must hang at least 2.1 metres above the floor, and blade tips should stay at least 50 centimetres from walls. Arithmetic from the height: on a 2.4 metre ceiling the blades hang at about 2.07 metres, just under the minimum. A ceiling of about 2.45 metres clears it, and 2.5 metres or more leaves a margin. The electrician should confirm the figure. Low and standard ceilings are better served by a hugger, and a high ceiling suits a fan on a rod. See ceiling fans for ceilings under 2.7m and ceiling fans for high ceilings.

Sloped ceilings

Fans generally handle about 10 degrees of ceiling tilt without a kit, and 20 to 40 degrees usually needs a raked ceiling kit and a longer rod. The Polo takes 12 degrees, which covers a gentle slope. The same 12 degrees appears against the canopy and also against the blade pitch, so confirm which figure applies to the ceiling before relying on it.

Choosing the size

The standard fan size is 52 inch (132cm), with 48 inch (122cm) for smaller rooms and over 54 inch (137cm) for larger square rooms of about 5 by 5 metres or more. By area, 12 to 20 square metres pairs with a 52 to 60 inch fan. The 1320mm Polo therefore fits a bedroom or a standard living room, and a long room takes several 52 inch fans rather than one very large fan. See medium size ceiling fans.

Light or no light

The light version has a dimmable LED of 2,500 lumens with adjustable colour temperature. Warm white of about 2700K to 3000K suits bedrooms and lounges and neutral white of about 4000K suits task areas. A fan light near downlights can cause a strobe effect as the blades pass in front of them, and many models are sold as light or no-light versions only. Decide before buying, since the light adds to the height. See ceiling fans with lights and ceiling fans without lights.

DC motor, speeds and the app

DC motors are now the most common type and are more efficient than AC. They offer up to seven speeds and run on a normal supply through an internal rectifier. DC fans use less electricity than AC on average. The Polo is DC with eight settings, and the breeze mode varies the speed over time. A phone app depends on the home Wi-Fi, so the remote is the fallback. See DC motor fans and smart ceiling fans.

Airflow and blades

The Polo moves about 10,862 cubic metres an hour at top speed, and a large fan usually runs at its lowest speed most of the time. No blade material improves airflow. Design, shape and motor quality drive it, and blade count does not matter. A fan's airflow figure and span are the fair comparison between models.

Indoor use and the covered outdoor wording

The Polo is for indoor use. Other wording describes it for indoor and covered outdoor applications. Those statements do not match, so treat indoor as the figure to work from and ask us before fitting a Polo on a patio. Covered does not mean dry: sideways rain and sea air can reach a fan near the edge of a roof, and so can mist. Fans made for outdoors are under outdoor ceiling fans.

Noise, balance and common faults

For a bedroom, listen at the lowest speed. Clicking or knocking irritates more than steady air noise. Humming can come from ripple control signals on the supply and is usually not a fault in the fan, and a conventional dimmer on a fan light can also hum. A wobbling fan is louder and less efficient, and a balance kit corrects it. A firm fixing, a compatible control and a licensed install avoid most of these problems.

Placing the fan

Centre the fan over the seating or the middle of the room, away from tall walls, because air thrown at a wall is wasted. In a bedroom, centring it over the bed puts the air where people sleep, and the lowest speed and sleep mode are the settings to judge. A fan with a light can serve as the room's main fitting, so settle the light before the electrician wires it, and check that nothing hangs below the blades.

The Polo beside Martec's other 1320mm DC fans

Martec lists several 1320mm DC fans, and it is height and pitch that separate them. The Polo is 335mm tall and takes 12 degrees. The Hampton is 295mm to 320mm at 10 degrees, the Triumph 288mm to 298mm at 15 degrees, and the Elite 310mm to 340mm at 10 degrees. The Metro is the low one, at 210mm to 222mm on a flat ceiling. On a standard 2.4 metre ceiling the Triumph and Hampton clear the 2.1 metre minimum by a small margin and the Polo does not, so ceiling height can decide between them. See Hampton and Triumph.

Matching nickel and driftwood to the room

The nickel and driftwood version pairs a silver-toned body with a pale timber-look blade. Finishing pages describe nickel finishes as a warm silver and brushed versions as hiding fingerprints, and driftwood is a light, weathered timber tone. Match the other metalwork in the room, tapware and door handles for example, since mixed metals can look unplanned. A white or light ceiling shows the fan clearly, and a darker ceiling lets it fade back. See brushed nickel ceiling fans.

Reverse mode and winter use

Warm air collects at the ceiling, and a fan in reverse at a low speed moves it back down gently. Reversing from anticlockwise to clockwise pulls air upward without a direct draught, and a slow speed in the normal direction can also help. On a standard ceiling the effect is modest, and it grows with ceiling height. The remote switches direction.

Remote and wall control

The Polo comes with a remote and receiver, and a fan generally cannot run from a wall control and a remote together without a specific adapter. Pick one control for the room before the electrician wires it. A remote suits a bedroom, and a wall switch left on power suits a fan nobody wants to hunt a remote for. Add-on remote kits name the Martec ranges they suit, so check any kit against the Polo before buying; see fan accessories.

Installation and care

A hard-wired ceiling fan needs a licensed electrician, and wall-switch fans cannot legally be fitted without one. The electrician checks the ceiling support, the wiring, the switch position and the circuit protection. Wipe the blades every few weeks, and avoid abrasive pads on a matt finish. Check that the canopy and blade screws stay tight, since a loose fitting adds a knock.

Quick answers on the Polo

  • Is it flush? No, it is 335mm tall. The Metro is the Martec flush fan.
  • DC or AC? DC, 36 watts at maximum.
  • Does it have a light? It is sold with and without one, at 2,500 lumens on the light version.
  • Can a phone control it? Yes, through the Smart Life app, and every version has a remote.
  • Will it fit a 2.4 metre ceiling? The blades would hang at about 2.07 metres, just under the 2.1 metre minimum.
  • Is the walnut real? No. The blades are ABS and the walnut is a finish.

Choosing a version by room

  • A bedroom with a ceiling above 2.5 metres: the version without a light, or with a light and a warm colour temperature, using the sleep mode.
  • A living room where the fan is the main fitting: the version with a light.
  • A room with downlights: the version without a light.
  • A room with a light timber floor: the white and walnut version.

Related collections

For every style see ceiling fans. By brand, Martec ceiling fans. Close relatives in the Martec line are Hampton and Triumph, with Riviera alongside.

Frequently Asked Questions

Should I choose a DC or AC motor ceiling fan?

This choice comes down to what you value most: upfront cost or long-term efficiency. AC motor fans are the traditional, more affordable option and remain reliable workhorses. DC motor fans, by contrast, use up to 70% less energy, run quieter, and offer finer speed control, an investment that tends to reward those who value comfort and lower running costs over the years ahead.

What size ceiling fan do I need for my room?

The right fan size is determined by the dimensions of the room, not personal preference alone. As a general guide, rooms up to 12m² suit a blade span of 900–1200mm, rooms up to 20m² call for 1200–1400mm, and larger open-plan living areas often benefit from 1400mm or above. Ceiling height also plays its part, for ceilings under 2.4m, a low-profile or hugger-style fan is the wiser choice to maintain safe clearance while still delivering effective airflow.

Should my ceiling fan spin clockwise or anticlockwise?

There is wisdom in the seasons here. In summer, fans should rotate anticlockwise (when viewed from below) to push air straight down, creating a cooling breeze. In winter, reversing the fan to spin clockwise draws warm air that naturally rises back down into the room, helping redistribute heat more evenly.

Are outdoor ceiling fans different from indoor ones?

They are, and the distinction matters. Outdoor fans are built to endure the elements, rated as either "damp" (suitable for covered, sheltered areas like alfresco spaces) or "wet" (able to withstand direct rain and moisture). Installing an indoor-rated fan outdoors risks premature wear and safety issues, so it's worth confirming the rating aligns with where the fan will ultimately live.