Martec Seaforth ceiling fans buying guide
The Martec Seaforth is a 33 watt DC ceiling fan with Wi-Fi control, sold in two spans, 1320mm (52 inch) and 1420mm (56 inch). It comes in matt white, matt black, or matt black with teak-look blades, with or without an LED light. People who search for the Seaforth usually want to know how high it hangs, what the light does, how it is controlled and whether it can go outside. This guide answers those from the specification of each version, with general advice about fans alongside. Airflow and blade pitch are not published for the Seaforth, so they are not stated here. Where figures differ, the text says so and names what to confirm.
Seaforth specification
- Spans: 1320mm and 1420mm.
- Motor: brushless DC, 33 watts at maximum on both spans.
- Construction: steel body and canopy with ABS blades, and a 155mm canopy.
- Ceiling pitch: up to 10 degrees.
- Overall height: 315mm on every version, with or without a light.
- Settings: eight, among them a comfort sleep mode, a breeze mode and a reverse mode.
- Control: Wi-Fi through the Smart Life app. The box holds a remote with its cradle and batteries, and a receiver.
- Weight: about 5.5 kilograms on the 1320mm and 5.8 on the 1420mm.
- Light version: a dimmable LED of 1,415 lumens with adjustable colour temperature.
- Usage line: indoor.
Choosing between 1320mm and 1420mm
A 52 inch (132cm) fan is the standard size, 48 inch (122cm) suits smaller rooms and more than 54 inch (137cm) suits larger square rooms of about 5 by 5 metres or more. The 1320mm Seaforth is therefore the standard size and suits a bedroom or a standard living room. The 1420mm is just over the 54 inch line, which puts it in the larger-room group. By area, 12 to 20 square metres pairs with a 52 to 60 inch fan, and anything above 20 square metres takes 60 inch and larger, so the 1420mm covers the upper part of that band.
Two refinements help. A slightly larger fan on a lower speed can move the same air as a smaller fan on high, and can be quieter. A long room does better with several 52 inch fans than with one very large fan. Both Seaforth spans share one motor, one wattage and one height, so the choice comes down to the room and not the build. See medium size ceiling fans and large fans.
Ceiling height and clearance
Blades must hang at least 2.1 metres above the floor, and blade tips should stay at least 50 centimetres from walls. The arithmetic from the height is direct. At 315mm, the Seaforth needs a ceiling of about 2.42 metres to leave 2.1 metres under the blades. On a 2.4 metre ceiling the blades hang at about 2.085 metres, just under the minimum, and on a 2.5 metre ceiling they hang at about 2.19 metres. The electrician should confirm the figure, because the real blade height depends on the fan's geometry. Because the height is the same lit and unlit, the light version should not need extra room, though that is worth confirming too.
A standard 2.4 metre ceiling is therefore marginal for a Seaforth. For a lower ceiling see low profile fans or ceiling fans for ceilings under 2.7m. For a high ceiling, ceilings of about 2.7 to 3 metres or higher may need an extension rod, which is sometimes included, sometimes sold separately and not available for every model. See ceiling fans for high ceilings.
Sloped ceilings
Fans generally handle about 10 degrees of ceiling tilt without a kit, and 20 to 40 degrees usually needs a raked ceiling kit and a longer rod. The Seaforth takes 10 degrees, so it covers a gentle slope and not a steep one. A steeper roof line needs a raked kit and the electrician's advice.
The light
The lit versions have a dimmable LED of 1,415 lumens with adjustable colour temperature. 800 to 1,500 lumens is a guide for lighting a whole room, so 1,415 lumens suits a bedroom or a small living room, and the dimming brings it down for the evening. Warm white of about 2700K to 3000K suits bedrooms and lounges and neutral white of about 4000K suits task areas. A fan near downlights can strobe as the blades pass in front of them, and many models are sold as light or no-light versions only, so decide before you buy. The colour temperature range is not published, so check the product page for the stages. See ceiling fans with lights and ceiling fans without lights.
DC motor, speeds and the app
DC motors are now the most common type and are more efficient than AC. They offer up to seven speeds, and they run on a normal supply through an internal rectifier. DC fans use less electricity than AC on average. The Seaforth is a DC fan with eight settings, and the breeze mode varies the speed over time while the sleep mode suits a bedroom. A phone app depends on the home Wi-Fi, so the remote is the fallback, and the Seaforth comes with one. See DC motor fans and smart ceiling fans.
Finishes
The Seaforth comes in matt white or matt black, or in matt black with teak. The teak is a finish on ABS blades, and many blades that look like wood are plastic. White blends into a light ceiling while black contrasts, and matte finishes hide fingerprints better than gloss. A teak tone suits timber floors and furniture, though mismatched wood tones can clash, so check the tone against the room. Colour does not change how much air a fan moves. See white ceiling fans, black ceiling fans and woodgrain ceiling fans.
Indoor use
The Seaforth is for indoor use and makes no claim for covered outdoor areas. That is the wording to follow. Covered does not mean dry: sideways rain and sea air can reach a fan near the edge of a roof, and so can mist. A fan on a patio needs a stated outdoor use. See outdoor ceiling fans for the fans that have one.
Noise and balance
For a bedroom, listen at the lowest speed, because clicking or knocking irritates more than steady air noise. Humming can come from ripple control signals on the supply and is usually not a fault in the fan, and a conventional dimmer on a fan with a light mount can also hum. The motor is quiet and efficient, and no decibel figure is given, so judge the fan on the DC motor and the speed setting. A wobbling fan is louder and less efficient, and a balance kit corrects it. See quiet operation fans.
The Seaforth beside Martec's other DC fans
Martec lists several DC fans at similar spans, and it is height and pitch that separate them. The Seaforth is 315mm tall at 10 degrees on both its sizes. The Hampton is 295mm to 320mm at 10 degrees, the Triumph is 288mm to 298mm at 15 degrees, and the Metro is 210mm to 222mm on a flat ceiling. In the 1420mm size, the Newport is 272mm tall, which is lower than the Seaforth. On a standard 2.4 metre ceiling the Seaforth is the tightest of these, so ceiling height can decide between them. See Hampton and Triumph for the same span, Newport for the larger one, and Metro for the lowest.
Blade count, blade material and airflow
The Seaforth has a steel body with ABS blades and no stated blade count or airflow figure. That leaves two common questions open. Blade count is not a factor in performance, and high-performing fans have two, three or four blades. Fewer blades move air faster and more blades are often quieter, though that is a tendency and not a tested result. No blade material has been shown to improve airflow, and blade shape and motor quality are what count. So a count, once known, would not decide the purchase. The airflow figure and the span are the fair comparison between models, and the specification sheet linked from the product page is where to ask for them.
Remote or wall control
The Seaforth comes with a remote and receiver, and a fan generally cannot run from a wall control and a remote together without a specific adapter. Pick one control for the room before the electrician wires it. A remote suits a bedroom, and a wall switch left on power suits a fan nobody wants to hunt a remote for. A wall-switch fan needs a licensed electrician, and apps and voice assistants can replace wall switches or remotes on some models. Add-on remote kits name the Martec ranges they suit, so check any kit against the Seaforth before buying; see fan accessories.
Installation and care
A hard-wired ceiling fan needs a licensed electrician, and wall-switch fans cannot legally be fitted without one. The electrician checks the ceiling support, the wiring, the switch position and the circuit protection. Wipe the blades every few weeks, and avoid abrasive pads on a matt finish. Check that the canopy and blade screws stay tight, since a loose fitting adds a knock, and have the fan inspected early if it hums, wobbles or runs slowly.
Quick answers on the Seaforth
- DC or AC? DC, 33 watts at maximum.
- Which sizes? 1320mm and 1420mm.
- Is there a light? Some versions have one, at 1,415 lumens, dimmable.
- Can a phone control it? Yes, through the Smart Life app, and every version has a remote.
- Will it fit a 2.4 metre ceiling? The blades would hang at about 2.085 metres, just under the 2.1 metre minimum, so a ceiling of about 2.5 metres is the safer choice.
- Can it go on a patio? The Seaforth is an indoor fan, so keep it inside.
Related collections
For every style see ceiling fans. By brand, Martec ceiling fans.