Skip to content

Meir Harrington

0 Items

Whoops, there are none available in your area

View all products

Meir Harrington: traditional tapware, showers and accessories in brushed nickel

Meir Harrington is a traditional bathroom range with arched spouts, quarter turn lever handles and a solid brass body, finished in PVD brushed nickel. The shapes suit Hamptons, Provincial and Country Farmhouse rooms and sit just as well in a classic bathroom with modern fittings. The range covers basin mixers, wall taps and spouts, a freestanding bath mixer, a kitchen mixer, showers and towel rails, so one design can run from the basin to the bath to the shower.

People search for it as Meir Harrington, Meir Harrington range and Meir Harrington tapware. This page sets out each piece with the sizes and ratings that decide whether it fits, and which pieces are designed to be paired. Meir tapware from other ranges is in Meir taps.

What is in the Harrington range

Group Pieces
Basin tapware Short basin mixer, tall basin mixer, 3-hole basin set
Wall tapware Wall spout, wall mount swivel spout, quarter turn wall tap set, wall mixer, diverter mixer
Bath and kitchen Freestanding bath mixer, kitchen mixer with swivel spout
Showers Combination shower rail set, 200mm shower head, hand shower on a swivel bracket, 400mm shower arm
Accessories Double towel rail 750mm, guest towel rail, robe hook, toilet roll holder

Finish

Harrington is made in PVD brushed nickel, which is a hard coating bonded to the brass in a vacuum chamber. Brushed nickel is a soft silver with a fine grain, and it is easy to wipe over with a cloth. Because the whole range is one finish, every tap, shower and accessory matches without checking, which is the main reason to choose Harrington as a set and not piece by piece.

Basin mixers

There are three ways to put a Harrington tap on a basin. The short mixer is a single lever mixer for an inset or undermount basin, where the spout sits low. The tall mixer is made for an above counter basin, where the spout must clear the rim and the water must land inside the bowl. The 3-hole basin set uses two quarter turn lever handles and a gooseneck spout on a three hole basin, with flexible hose connections between the handles and the spout.

Basin tap Spout height Spout reach Overall height WELS rating
Short basin mixer 61.08mm 126.31mm 158.7mm 5 star, 5.5 L/min
Tall basin mixer 191.18mm 146.05mm 279.95mm 5 star, 5.5 L/min
3-hole basin set 115.04mm 146.05mm 205.75mm 5 star, 6 L/min

The spout height is the number to check against the basin. A short mixer with a 61mm spout height cannot serve an above counter basin, because the water would hit the rim. The tall mixer has a 191mm spout height, so the water clears the rim of a vessel or above counter bowl, and the 146mm reach lets it land near the centre. Choose the 3-hole set when the basin already has three tap holes, or when you want separate hot and cold handles with a spout between them, which is the traditional layout.

Wall spouts and the quarter turn wall tap set

Wall tapware keeps the bench clear and suits a wall hung basin, a bath or a pair of basins. The Harrington wall spout has a 200mm reach and is rated WELS 5 star at 5.5 litres a minute. The wall mount swivel spout is longer at 210mm reach and 188mm spout height, projects 317.1mm from the wall and swings, which suits a kitchen or a laundry or a bath with a wide rim.

The quarter turn wall tap set is the control for the wall spout. It has two lever handles that turn a quarter of a turn from off to full on, so you set the flow with a short, precise movement. The set is 358mm long and 85mm deep with a fixing distance of 200mm and a round plate 64mm across. It is designed to pair with the wall spout or with the shower, so one set of handles can serve a basin or a bath.

Piece Key sizes
Wall spout Reach 200mm, overall length 212.5mm, WELS 5 star
Wall mount swivel spout Reach 210mm, spout height 188mm, projection 317.1mm, overall height 329mm
Quarter turn wall tap set 358mm long, 85mm deep, fixing distance 200mm, plate 64mm across
Wall mixer, full kit Overall height 119.5mm, projection 70.5mm
Diverter mixer, full kit Overall depth 52.5mm

The wall mixer and the diverter mixer are sold as full kits. The wall mixer is a single lever control that pairs with a spout or a shower, and the diverter mixer sends water to either the shower or a spout. Both have a body that sits in the wall, so settle the spout reach, the handle position and the plate before the tiles go on. A spout that reaches 200mm should land its water on the centre of the basin or the bath outlet, so measure from the finished tile surface and choose from the reach.

Bath and kitchen

The freestanding bath mixer is a floor standing spout with an integrated mixer and a single lever. It stands 951.25mm high, with a 859.46mm spout height and a 210.47mm reach, and it is rated for a flow of 19 litres a minute at 3 bar pressure, which fills a bath quickly. A mixer that stands on the floor needs the pipework to come up in the right place, so plan the bath position before the floor is finished.

The kitchen mixer has a swivel spout and a single lever. It is 373.6mm tall with a spout height of 250.46mm and a reach of 210.47mm, rated WELS 4 star at 6.5 litres a minute. That height gives room to fill a tall pot, but check the sill and any cupboard above the sink before you choose it.

Showers

The Harrington shower pieces are built to work together. The combination shower rail set has an adjustable rail and an in-built diverter that switches between a hand shower and an overhead rain shower. It fits a standard G1/2 inch fitting, stands 1315.5mm high, projects 562.5mm and fixes at 650mm centres. The 200mm shower head, the hand shower on a swivel bracket and the combination set are all rated WELS 3 star at 9 litres a minute.

Shower piece Key sizes Rating
Combination shower rail set 1315.5mm high, 562.5mm projection, 650mm fixing distance 3 star, 9 L/min
Shower head, 200mm 227.5mm long, 94.7mm high 3 star, 9 L/min
Hand shower on swivel bracket 139mm projection, works at 150 to 500 kPa 3 star, 9 L/min
Shower arm 400mm Not rated

Pair the shower set with the wall mixer or the quarter turn wall tap set. A rail with a diverter suits a shower where more than one person uses the shower, because the hand shower slides to a child or an adult. Check the supply pressure against the 150 to 500 kPa working range. See Meir showers for shower pieces from other Meir ranges.

Towel rails and accessories

The accessories carry the same arched, traditional line. The 750mm double rail is 794mm long overall with a fixing distance of 749mm and a projection of 120.5mm, so a towel hangs front and back. The guest towel rail is 241.06mm long, the robe hook is 56mm long and projects 64.8mm, and the toilet roll holder is 194.6mm long and projects 65mm.

The fixing distance is the number to measure on the wall, not the overall length. Mark it, level it, then drill, and check the backing behind the wall before you fix. The double rail projects further than the single pieces, so leave clear wall beside it. All of the accessories are in the same brushed nickel as the taps. See Meir bathroom accessories for accessories from other ranges.

How the pieces pair

Some Harrington pieces are made to work as a pair, and getting the pair right avoids a mismatch at rough-in. The table shows which control goes with which outlet.

Control Pairs with Result
Quarter turn wall tap set Wall spout or wall mount swivel spout Two lever handles with a spout between or beside them, for a basin or a bath
Quarter turn wall tap set Combination shower rail set Handles that switch the shower on, with the rail diverter choosing hand or overhead
Wall mixer, full kit Wall spout or shower set One lever for flow and temperature
Diverter mixer, full kit Spout and shower Sends the water to the bath spout or the shower
Tall or short basin mixer Nothing extra A complete basin tap on one hole
3-hole basin set Nothing extra Two handles and a gooseneck spout on three holes

The two control styles feel different. A single lever mixer sets flow and temperature with one hand and is quick to use. Two quarter turn handles give separate hot and cold control, which is slower but is the traditional look and the one many Hamptons and farmhouse bathrooms use. Decide which you prefer before you choose the spouts, because the wall control and the spout are separate purchases and the handles set the rough-in.

The WELS ratings follow the use. The basin mixers sit at 5 star and 5.5 litres a minute, the 3-hole set at 5 star and 6 litres a minute, the kitchen mixer at 4 star and 6.5 litres a minute and the showers at 3 star and 9 litres a minute. A lower star count on a kitchen mixer or a shower is expected, because those fittings need a larger flow to do their job. The wall mixers, the diverter and the bath mixer are not given a rating of their own in this range.

Planning a Harrington room

Start with the basin. It sets the mixer height and the tap hole count, and it points to the tall mixer, the short mixer or the 3-hole set. Then choose the wall pieces, because the bodies go into the wall before the lining. Add the shower rail and the towel rails last, in the same finish.

Harrington suits a room with traditional lines: panelled walls, a pedestal or a furniture style vanity, white tiles and warm timber. In a very modern room with flat panels and square fittings, the arched spouts and the lever handles will look out of place, and a plain range would sit better.

Before you order

Confirm the basin type and the tap holes, then choose the mixer by its spout height. Confirm the spout reach for any wall spout. Check the 150 to 500 kPa working range against your supply. Read the rating on the exact piece, because the flow differs between a basin mixer at 5.5 litres a minute, a kitchen mixer at 6.5 and a shower at 9. Harrington is made in brushed nickel only, so choose it when brushed nickel is the finish you want across the room.

Frequently Asked Questions

How do I know which basin mixer is right for my basin type?

The key factor is the height and style of your basin. For standard inset or semi-recessed basins, a regular deck-mounted basin mixer with a spout height of around 100–140mm works well. However, if you have an above-counter or vessel basin, where the bowl sits on top of the benchtop, you will need a tall basin mixer with a spout height of 180mm or more, otherwise the spout will sit below the basin rim and water will splash onto the benchtop. Wall-mounted mixers offer another option for above-counter basins, with the height controlled by your rough-in position. Always confirm basin rim height before purchasing your tapware.

What is a WELS rating and does it matter when choosing a basin mixer in Australia?

The Water Efficiency Labelling and Standards (WELS) scheme is a mandatory Australian government rating system that measures how water-efficient a tapware product is. Ratings run from 1 to 6 stars, the more stars, the less water the tap uses per minute. For basin mixers, a 5 or 6-star WELS rating is considered excellent and translates to meaningful long-term savings on water bills, particularly important in drought-prone Australian states. All tapware sold in Australia must carry a WELS rating, and most reputable brands now offer basin mixers rated 4 stars or higher as standard. Look for the WELS label on the product or packaging before you buy.

What is the difference between a bath mixer and a basin mixer?

While bath mixers and basin mixers may look similar, they are not interchangeable. The key technical difference is the water supply connection size. This difference matters because filling a bathtub requires a significantly higher flow rate, a basin mixer simply cannot deliver water fast enough to fill a bath in a reasonable time. Always use tapware specified for bath applications when fitting out a bath, and consult your plumber if you are unsure.

What is a shower mixer and how does it work?

A shower mixer (or shower tap) is the control valve that regulates the flow and temperature of water to your shower. A single-lever mixer controls both temperature and flow with one handle. A thermostatic mixer maintains a pre-set water temperature even if pressure changes elsewhere in the system, a safer and more convenient option, particularly for households with children. Shower mixers in Australia must comply with AS 3718 standards.

What is a rail shower and why is it popular in Australian bathrooms?

A rail shower (also called a slider rail shower or shower rail kit) includes a hand shower mounted on an adjustable rail, allowing users to slide the shower head up or down to their preferred height. Rail showers are among the most practical and versatile shower options available, they suit users of different heights, are ideal for bathing children, and are easy to use for rinsing down shower walls. They are widely used in family bathrooms across Australia.

What is a rail shower with overhead and how does it work?

A rail shower with overhead shower combines a fixed overhead shower head at the top of the rail with a sliding hand shower below. A diverter valve (either integrated into the rail or fitted separately at the mixer) allows you to switch water flow between the overhead and the hand shower. This combination delivers the best of both worlds, the immersive feel of a rain shower with the flexibility of a hand shower.

What is Meir Harrington?

Harrington is a named tapware range within the Meir brand, built around a more traditional design than Meir's contemporary lines, rounded bodies and cross or lever handles that suit a classic or heritage-style bathroom. It's typically offered across basin mixers alongside matching bath and shower tapware in the same design language. For Meir's tapware range as a whole, see Meir taps.

What style of bathroom suits the Harrington range?

Its traditional detailing suits a period home, a Hamptons-style renovation, or any bathroom built around softer, classic lines rather than sharp contemporary edges. It pairs naturally with freestanding baths, furniture-style vanities and classic-profile basins, rather than a squared-off, minimalist fitout.

What finishes is the Harrington range available in?

Traditional-style ranges like Harrington are generally offered across finishes suited to a classic look, polished chrome as the standard, with warmer metallic options such as brushed nickel or brushed gold sometimes available depending on the specific product. Check current stock for the finish you need before finalising a bathroom plan.

What spout height do I need for a Harrington basin mixer?

This depends on your basin's mounting type rather than the Harrington name itself. A standard inset or semi-recessed basin suits a regular height mixer, while an above-counter or vessel basin needs a taller mixer so the spout clears the raised rim. Confirm your basin's rim height before choosing a specific mixer.

Does the Harrington range include bath and shower tapware as well as basin mixers?

Named ranges like Harrington are typically offered across multiple applications, basin mixers, and often matching bath and shower mixers, sharing the same traditional design language so the look carries through the whole bathroom. Check which specific products within Harrington are currently available for the fixture you're fitting out, since coverage can vary within any one range.

Does Meir Harrington tapware meet Australian standards?

Yes. Regardless of style or finish, all tapware sold in Australia, Harrington included, must carry a WELS water efficiency rating and WaterMark certification. Installation should be carried out or checked by a licensed plumber to meet local plumbing code and keep the product's warranty valid.