Skip to content

Meir Shadow

85 Items

  • Lifetime Warranty
    Meir Round Wall Shower Arm 400mm Shadow

    Meir Round Wall Shower Arm 400mm Shadow

    Checking delivery...
    $299
    $0 (-0%) off RRP of $299
  • Lifetime Warranty
    Meir Round Hand Shower on Bracket - Shadow

    Meir Round Hand Shower on Bracket - Shadow

    Checking delivery...
    $436
    $0 (-0%) off RRP of $436
  • Lifetime Warranty
    Meir Round Tall Shadow Basin Mixer with Curved Spout

    Meir Round Tall Shadow Basin Mixer with Curved Spout

    Checking delivery...
    $849
    $0 (-0%) off RRP of $849
  • Lifetime Warranty
    Meir Round Basin Mixer - Shadow

    Meir Round Basin Mixer - Shadow

    Checking delivery...
    $549
    $0 (-0%) off RRP of $549
  • Lifetime Warranty
    Meir Round High-Rise Swivel Wall Spout Shadow

    Meir Round High-Rise Swivel Wall Spout Shadow

    Checking delivery...
    $411
    $0 (-0%) off RRP of $411
  • Sale On Now!

    Sale On Now!

    Up to 70% off across the store, plus free towels and mirrors up for grabs on orders over $800*

    Shop the Sale
  • Lifetime Warranty
    Meir Gooseneck Shower Set with 300mm rose, Single-Function Hand Shower Shadow

    Meir Gooseneck Shower Set with 300mm rose, Single-Function Hand Shower Shadow

    Checking delivery...
    $2,124
    $0 (-0%) off RRP of $2,124
  • Lifetime Warranty
    Meir Gooseneck Shower Set with 300mm rose, Three-Function Hand Shower Shadow

    Meir Gooseneck Shower Set with 300mm rose, Three-Function Hand Shower Shadow

    Checking delivery...
    $2,124
    $0 (-0%) off RRP of $2,124
  • Lifetime Warranty
    Meir Gooseneck Shower Set with 200mm Rose, Three-Function Hand Shower Shadow

    Meir Gooseneck Shower Set with 200mm Rose, Three-Function Hand Shower Shadow

    Checking delivery...
    $1,874
    $0 (-0%) off RRP of $1,874
  • Lifetime Warranty
    Meir Paddle Round Freestanding Bath Spout and Hand Shower Shadow

    Meir Paddle Round Freestanding Bath Spout and Hand Shower Shadow

    Checking delivery...
    $3,749
    $0 (-0%) off RRP of $3,749
  • The surfaces you choose define the space you create

    The surfaces you choose define the space you create

    Shop All Tiles ->
  • Lifetime Warranty
    Meir Pinless Round Kitchen Sink Mixer Tap Shadow

    Meir Pinless Round Kitchen Sink Mixer Tap Shadow

    Checking delivery...
    $724
    $0 (-0%) off RRP of $724
  • Lifetime Warranty
    Meir Pinless Round Tall Basin Mixer - Shadow

    Meir Pinless Round Tall Basin Mixer - Shadow

    Checking delivery...
    $674
    $0 (-0%) off RRP of $674
  • Lifetime Warranty
    Meir Pinless Round Basin Mixer - Shadow

    Meir Pinless Round Basin Mixer - Shadow

    Checking delivery...
    $549
    $0 (-0%) off RRP of $549
  • Lifetime Warranty
    Meir Round Cross Jumper Valve Wall Top Assemblies Shadow

    Meir Round Cross Jumper Valve Wall Top Assemblies Shadow

    Checking delivery...
    $486
    $0 (-0%) off RRP of $486
  • Lifetime Warranty
    Meir Freestanding Round Bath Mixer with Hand Spray - Shadow

    Meir Freestanding Round Bath Mixer with Hand Spray - Shadow

    Checking delivery...
    $3,749
    $0 (-0%) off RRP of $3,749
  • The surfaces you choose define the space you create

    The surfaces you choose define the space you create

    Shop All Tiles ->
  • Lifetime Warranty
    Meir Round Basin Mixer with Curved Spout - Shadow

    Meir Round Basin Mixer with Curved Spout - Shadow

    Checking delivery...
    $624
    $0 (-0%) off RRP of $624

Meir Shadow: gunmetal tapware, showers, accessories and handles

Meir Shadow is a dark gunmetal finish, a PVD coating that sits between charcoal and black with a faint cool tone. It is applied across the Meir bathroom and kitchen: basin and kitchen mixers, wall mixers and spouts, rail and rose showers, towel rails and hooks, Oppen cabinet handles, floor drains, a door stop and a heated towel rail. This page sets out what is made in Shadow, with the sizes and ratings that decide fit.

People search for it as Meir Shadow. For Meir tapware in every finish, see Meir taps, for showers see Meir showers, for accessories see Meir bathroom accessories and for handles see Meir Oppen cabinet handles.

The Shadow finish

Shadow is PVD, which means the colour is bonded to the metal in a vacuum chamber. It resists scratches and tarnish better than ordinary plating. It is darker than brushed nickel and softer than matte black, so it suits stone, concrete, timber and plaster, and it works with white basins and pale tiles where a strong, quiet contrast is wanted. Because the finish is the same on every piece, a mixer, a rail and a handle match without checking, which is the main reason to choose Shadow as a set.

What is made in Shadow

Group Pieces Where to see more
Basin tapware Round basin mixers, tall and curved versions, Piccola basin mixer, paddle basin mixer, curved wall spouts Meir taps
Kitchen Round and Paddle gooseneck sink mixers, Piccola and Paddle pull out sink mixers Meir taps
Wall tapware Wall mixers, pinless and paddle wall mixers, diverter mixers, quarter turn wall tops, wall swivel spout Meir taps
Showers Rail showers, combination rail, shower roses, hand showers, wall and ceiling arms, glass fixing bracket Meir showers
Accessories Towel rails, hooks, toilet roll holder, soap dispenser, toilet brush, heated towel rail Meir bathroom accessories
Handles Oppen edge pulls, round pulls and T-pulls Meir Oppen cabinet handles
Drains and wastes Square floor grates, shower waste with tile insert, universal pop-up waste Meir wastes and traps

Basin mixers and spouts

The Shadow basin mixers use a 35mm ceramic cartridge in brass and are rated WELS 5 star. The Piccola basin mixer is a compact mixer rated 5 star at 5.5 litres a minute and weighs 0.95kg, and the Round mixers come standard, tall and with a curved spout, so there is a height for an inset basin and one for an above counter bowl. The curved wall spouts reach 130mm, rated 5 star at 5 litres a minute, and 200mm, rated 5 star at 5.5 litres a minute and 105mm high.

Piece WELS rating Key sizes
Piccola basin mixer 5 star, 5.5 L/min Compact, 0.95kg
Round curved spout 130mm 5 star, 5 L/min Reach 130mm
Round curved spout 200mm 5 star, 5.5 L/min Reach 200mm, 105mm high
Round, tall and paddle basin mixers 5 star Choose the height from the basin
If your basin Choose Reason
Sits in the bench, or is inset or undermount Standard basin mixer The spout is low and sits close to the bench
Stands on top of the bench Tall or vessel mixer The taller body lifts the spout above the bowl wall
Is fixed to the wall Wall basin set or wall spout The tap comes off the bench
Has no tap hole Wall set, or a bench mixer through a drilled hole The mixer comes from the wall or through the bench

Kitchen mixers

The Shadow kitchen mixers are rated WELS 5 star at 6 litres a minute. The Round gooseneck weighs 2.2kg and the Paddle Round gooseneck has the same weight, with a height to the spout that leaves room to fill a tall pot. The Piccola and Paddle pull out mixers weigh 2.9kg and have a hose that reaches the corners of the sink. Check the overall height against the window or the cupboard above the sink before you choose, since the pull out versions are the tallest.

Showers

The Round 3 function rail shower projects 70mm from the wall and the combination shower rail pairs a 200mm rose with a 3 function hand shower, both rated WELS 3 star at 9 litres a minute. The Round shower roses are 200mm, 42mm high, and 300mm, 58mm high, also 3 star at 9 litres a minute. The wall shower arm is 400mm and the ceiling arm is 300mm, and the hand showers come on a swivel bracket. A glass fixing U bracket in Shadow finishes a glass screen.

Setting shower heights

Shower heights are fixed at rough-in, before the tiles go on, so decide them early. A fixed wall head sits 2000mm to 2100mm above the finished floor, measured to the centre of the arm outlet, and a household taller than 190cm should go to 2100mm to 2200mm. The top of a rail is usually 1800mm to 1900mm, and the holder slides down to a comfortable height. A wall mixer sits 1000mm to 1100mm from the floor, centred in the shower space. Leave a margin of 15cm to 20cm above the head of the tallest user, and tell the plumber the heights before the linings are fixed.

Pressure, flow and head size

The supply decides how big a head can be. Round fixed heads usually run from 200mm to 300mm. On a low pressure supply, a smaller head of 150mm to 200mm gives a better spray, and a head larger than 250mm can feel weak unless a pump is fitted. A typical shower flow is 5 to 9 litres a minute, and a flow restrictor in the head keeps the use down. A simple test is to time how long a 10 litre bucket takes to fill. If it fills in under 60 seconds the pressure is good for a large rain head. A tank or gravity supply is usually best with a 3 star head.

Wall mixers

The Round wall mixers are 72mm long, with a pinless version and a paddle version and a short pin lever for a smaller plate. A diverter mixer sends the water to the shower or a bath spout, and the quarter turn wall tops are a pair of handles for a basin or a bath. Wall mixers carry no WELS rating of their own. The body goes in before the tiles, so settle the position and the spout reach while the wall is open.

Accessories and handles

The Shadow accessories are brass in the Round family and stainless steel in the Curvaé family. The Round robe hook projects 68mm and is 45mm wide, the toilet roll holder projects 80mm and is 147mm wide, and the guest towel rail is 258mm wide. The double towel rail comes in 600mm and 900mm, 645mm and 945mm overall, with a 115mm projection, and the single rail comes in 600mm and 900mm. The soap dispenser holds 500ml.

The Oppen cabinet handles are stainless steel with a PVD finish. The edge pulls come in 75mm, 150mm and 300mm lengths, the round pulls come in 200mm, 328mm and 520mm, with a knurled version of each, and there is a T-pull. The 150mm edge pull fixes at 134mm and the 200mm round pull fixes at 160mm, so match the fixing distance to the holes in the door, not the overall length.

Fixing rails and hooks

The fixing distance is the number to measure on the wall, not the overall length. Mark it, level it, then drill, and check the backing behind the wall before you fix. A double rail projects further than a single rail, so leave clear wall beside it. A rail that carries wet towels should be fixed to a stud or to blocking, or with heavy duty anchors in a hollow wall, because plasterboard alone will not hold the load.

Drains, wastes and door stop

The Square floor grate shower drain comes in 50mm, 80mm and 100mm outlets, and there is a shower waste with a tile insert. The universal pop-up waste is 67mm high and suits a basin or a bath. The round door stop is 84mm long and 19mm across. Choose the drain outlet by the pipe, and set the drain level and the fall before the tiles go on.

Caring for the tapware

Wipe the spout and handles with a soft microfibre cloth and warm water, and add a little mild soap if needed. Dry them so water does not set on the surface, which matters most in hard water areas. Keep bleach, harsh cleaners and abrasive pads away from the finish, since they dull plated and coated surfaces. Clean the aerator if the spray turns uneven, and wipe brushed finishes along the grain.

Reading the WELS rating

WELS is the Australian water efficiency label, and more stars means the fitting uses less water. A basin mixer can reach 6 star because a basin needs little water. A kitchen mixer sits at 4 or 5 star because a sink needs a larger flow to fill a pot, and a shower sits at 3 or 4 star because the flow has to be large enough to rinse. Wall mixers and shower taps do not require a rating of their own. Read the rating on the exact piece you are buying, and use a licensed plumber to fit it.

Before you order

Choose the pieces you need and keep Shadow across all of them, because Shadow beside matte black or brushed nickel reads as a near miss. Match the mixer height to the basin and the spout reach to the wall. Settle the shower and wall mixer positions at rough-in, and check the fixing distance on every rail and handle against the wall or the door.

Frequently Asked Questions

How do I know which basin mixer is right for my basin type?

The key factor is the height and style of your basin. For standard inset or semi-recessed basins, a regular deck-mounted basin mixer with a spout height of around 100–140mm works well. However, if you have an above-counter or vessel basin, where the bowl sits on top of the benchtop, you will need a tall basin mixer with a spout height of 180mm or more, otherwise the spout will sit below the basin rim and water will splash onto the benchtop. Wall-mounted mixers offer another option for above-counter basins, with the height controlled by your rough-in position. Always confirm basin rim height before purchasing your tapware.

What tapware finishes are most popular in Australian bathrooms right now?

Chrome remains the most timeless and widely used finish in Australian bathrooms due to its durability and versatility. However, matte black has become one of the most popular choices in contemporary renovations, offering a bold, sophisticated look that pairs well with white or light-toned vanities. Brushed nickel and brushed gold finishes are also trending strongly, adding warmth and a designer feel, particularly when paired with natural timber vanities and neutral stone benchtops. Gunmetal and brushed brass are gaining popularity for those seeking a more architectural or European-inspired aesthetic. Whichever finish you choose, consistency across all tapware and accessories in the same bathroom is important for a cohesive result.

What types of bath taps are available in Australia?

Wall-mounted bath mixers and spouts are fixed to the wall above or beside the bath, they create a clean, uncluttered look and suit most built-in and back-to-wall bath styles. Hob-mounted (deck-mounted) bath taps sit on the rim or surrounding ledge of the bath. Freestanding floor-mounted bath mixers are a statement option for freestanding baths, the tapware stands independently on the floor beside or behind the bath and is supplied through plumbing brought up through the floor. Finally, over-bath shower systems combine a bath filler spout with an integrated shower, offering versatility in smaller bathrooms.

What is a rail shower and why is it popular in Australian bathrooms?

A rail shower (also called a slider rail shower or shower rail kit) includes a hand shower mounted on an adjustable rail, allowing users to slide the shower head up or down to their preferred height. Rail showers are among the most practical and versatile shower options available, they suit users of different heights, are ideal for bathing children, and are easy to use for rinsing down shower walls. They are widely used in family bathrooms across Australia.

What is a rail shower with overhead and how does it work?

A rail shower with overhead shower combines a fixed overhead shower head at the top of the rail with a sliding hand shower below. A diverter valve (either integrated into the rail or fitted separately at the mixer) allows you to switch water flow between the overhead and the hand shower. This combination delivers the best of both worlds, the immersive feel of a rain shower with the flexibility of a hand shower.

What is a shower mixer and how does it work?

A shower mixer (or shower tap) is the control valve that regulates the flow and temperature of water to your shower. A single-lever mixer controls both temperature and flow with one handle. A thermostatic mixer maintains a pre-set water temperature even if pressure changes elsewhere in the system, a safer and more convenient option, particularly for households with children. Shower mixers in Australia must comply with AS 3718 standards.

What is a wall shower head?

A wall shower (or wall-mounted shower head) is a fixed shower head mounted to the shower wall via a shower arm. The shower head position is fixed, though some models have an adjustable arm allowing the angle and extension to be altered. Wall showers are a classic, simple, and practical choice for any bathroom.