Meir Toilet Roll Holders

Meir toilet roll holders are solid brass wall fixtures that hold a single roll, available in Meir's full finish range from matte black through to the brand's PVD Tiger Bronze and Lustre Bronze coatings. They're designed to match Meir tapware and accessories already in the bathroom, using the same round or square design language across the whole range.

What sets a Meir toilet roll holder apart

Most budget toilet roll holders are cast from zinc alloy and plated, which means the plating can wear through at the pivot point within a couple of years, especially in bathrooms with poor ventilation. Meir holders use solid brass for the arm and wall plate, so the base metal doesn't corrode even if the surface finish sees decades of daily use. The spring-loaded bar swings out for quick roll changes and holds standard Australian toilet paper widths without the roll sagging or spinning loosely. The extra weight in the arm also stops it swinging loosely when the roll is nearly empty, which is a common annoyance with lighter zinc holders.

Finish range

Matte black and brushed nickel are the two most requested finishes for new toilet builds, largely because they hide water spots and fingerprints better than polished chrome. Meir's PVD finishes, Tiger Bronze and Lustre Bronze, suit warmer colour schemes and are increasingly common in renovations that pair timber vanities with brass-toned tapware. Chrome remains available for matching existing fittings or for bathrooms where a brighter, reflective finish is preferred. Because every finish in the Meir range is produced across the full accessory line, choosing a toilet roll holder doesn't limit which finish is available for the robe hook or towel rail bought alongside it.

Mounting positions that actually work

The standard mounting height is 650 to 700mm from the floor, positioned so the holder sits slightly in front of and below the front edge of the toilet bowl, within easy reach without leaning forward. Leave at least 150mm of wall space either side of the toilet to avoid the arm knocking into a cistern lid or adjoining wall when it swings open. In tight ensuites, a holder with a shorter arm reduces the risk of catching a hip or knee when moving past. Where a toilet sits close to a side wall, mounting the holder on the opposite wall to the door swing usually gives the most comfortable reach.

Matching it to the rest of the room

If the bathroom already has Meir tapware, robe hooks or a towel rail, order the toilet roll holder in the same finish name at the same time. Because PVD finishes are applied in production batches, ordering together avoids any chance of a subtle tone difference between fittings bought months apart. This matters more with warm metallics like bronze than it does with matte black or chrome, where batch variation is barely noticeable. It's also worth checking the finish name carefully at checkout, since Tiger Bronze and Lustre Bronze look similar in product photography but read quite differently once installed under bathroom lighting.

Installation and upkeep

Fixing is straightforward. A concealed screw plate goes into the wall first, then the arm clips over it, so no visible screws show once it's mounted. Clean with a soft cloth and mild soap, avoiding bleach or ammonia-based bathroom cleaners that will dull a PVD finish faster than normal wear would. Every Meir toilet roll holder ships with Australia-wide delivery and can be returned within 60 days if it doesn't suit the space once installed.

Frequently Asked Questions