Skip to content

Momo Chelsea Solid Brass Lip Pull Handles

0 Items

Whoops, there are none available in your area

View all products

Chelsea Solid Brass Lip Pull by Momo: Buying Guide


The Momo Handles Chelsea is a lip pull with a solid brass body. It comes in two sizes, 120mm on a 96mm fixing distance and 300mm on 256mm, with a 45mm projection. Crafted entirely from solid brass, it has a minimalist profile and an ergonomic shape. Finishes run from Dark Brushed Brass and Brushed Satin Brass through Bronze, Dark Bronze and Dull Brushed Nickel to Gunmetal and Matte Black, and the specification names the finish process for each. That detail is easy to miss, because the process decides how a finish wears. The page covers what a lip pull is, what solid brass does, how each Chelsea finish is made, which size suits which front, and how to fit and clean it. For every type of handle, start at cabinet handles. For the wider family, see lip pull handles.

What a lip pull is

A lip pull is a U-shaped handle fixed to the top or side of a door, with one side shorter than the other. The short side forms a small lip, and the fingers hook under it. It is also sold as a finger pull or an edge pull. The half moon type sits flush with the bottom edge of the door or drawer, and lip pulls suit handleless and near-handleless designs such as fluted, Shaker and contemporary profiles.

What the Chelsea is made of

Every Chelsea has a brass construction. Brass is an alloy of copper and zinc, at about two thirds copper and one third zinc, with a density of 8.4 to 8.73 grams per cubic centimetre. Brass is heavier than zinc alloy or aluminium of the same size, and weight is the difference people notice first. Brass contains no iron, so it does not rust, and it performs best indoors or in moderate conditions.

Plenty of handles that look like brass are not. Brass-plated zinc alloy often loses its plating within months, and a scratch shows the difference: on plated zinc a deep scratch looks dull grey, while on a plated brass handle it shows the yellow brass underneath. With a brass body, a scratch on a Chelsea in any finish is more likely to show brass than grey. For the wider group, see solid brass cabinet handles.

The finishes and the process behind each

The Chelsea specification names the finish process for each colour, and reading it tells you more than the colour name does.

  • Dark Brushed Brass, Bronze and Dark Bronze are plated and lacquered.
  • Brushed Satin Brass is electroplated.
  • Dull Brushed Nickel is lacquered.
  • Gunmetal is PVD.
  • Matte Black is powder coated.

A clear lacquer coating protects brass from the air, so it keeps its colour longer than bare brass, and plated or lacquered options exist for owners who want a look that stays constant. Lacquer has a limit. The coating can eventually wear through where fingers touch most, and the spot then darkens. Lacquer can tarnish unevenly where it is scratched. A lacquered Chelsea therefore suits an even colour, with the grip area likely to show wear before the rest.

Bronze, and what it means on a brass body

The two bronze finishes are plated and lacquered over brass, and are not solid bronze. A dark bronze-coloured piece is not always solid bronze, since plating or a coating can give the same look. Brass is copper and zinc, while traditional bronze is copper and tin. In practice a bronze Chelsea behaves as lacquered brass, so it will not build a natural patina the way a solid bronze piece would, and the care steps below apply. See bronze cabinet handles.

Lip pull, cup pull or knob

Each shape is gripped differently. Knobs are gripped with the fingers, take a single screw and suit small to medium doors and drawers, while pulls are gripped with the whole hand and suit large or heavy fronts. A cup pull is a small pull shaped like a half cup that mounts flush to the face and is used mostly on lower drawers in Hamptons and farmhouse kitchens. A lip pull sits between the two. It suits handleless and near-handleless designs, and the lip still gives the fingers something to hook under. See cup pull cabinet handles if the cup shape suits the kitchen better.

Choosing a finish

Brushed brass is warm, and it pairs with white or navy cabinetry, while matte black is bold and modern. Bronze pairs with white or painted Shaker cabinets, walnut, oak and marble, and one finish across lighting and furniture helps coordination. Gunmetal is a dark grey, darker and moodier than brushed nickel, with cool undertones, and the dark tone helps conceal marks. A gunmetal handle suits gunmetal tapware without competing with it. For colour families, see brushed brass cabinet handles, gunmetal grey cabinet handles, black cabinet handles and brushed nickel cabinet handles.

The two sizes, measured

A lip pull is sold by overall length but fixed by its fixing distance, the gap between the two screw holes. The centre-to-centre figure is the key one, and ordering by overall length is the first mistake buyers make. The Chelsea comes as follows.

  • The short size is 120mm overall on a 96mm fixing distance.
  • The long size is 300mm overall on a 256mm fixing distance.
  • Both are 20mm wide with a 45mm projection, and screws are included.

Overall length always runs past the centre, so the short pull overhangs each hole by 12mm and the long pull by 22mm. Both centres, 96mm and 256mm, are standard centres, and 128mm is the most common in Australia. Neither Chelsea size is 128mm, so a cabinet drilled for 128mm will need new holes. The two sizes also scale differently: the long pull is 2.5 times the overall length of the short one, while its fixing distance is a little under 2.7 times as wide, so the long pull carries relatively more of its length between the screws. Width and projection stay the same on both, and at 45mm the projection is more than twice the 20mm width, which makes the Chelsea a deep pull compared with a flat bar. A deeper pull also stands further into the room, so allow for it beside a walkway, as the placement section notes and as the clearance advice above suggests.

Choosing a size by front

Applied to the Chelsea, the short size suits a vanity drawer, an upper door or a small cabinet. The long size suits a wide drawer, a wide pot drawer or a tall door, and two long pulls suit a pantry. A drawer between 450 and 600mm wide falls between the two sizes, because the table points to a 128 to 160mm centre, and the shorter Chelsea is the closer fit there. To be certain, test it: tape a strip the length of the handle to the cabinet for a day.

Placement

Centre the pull on a drawer front. On a base door, place it near the top corner on the side opposite the hinges, and on a wall door near the bottom corner. A lip pull is fixed to the top or side of a door, so decide which edge before you drill. 40 to 60mm in from the door edge is a starting point for the centre of a fixing. Handles should not hit each other when doors and drawers open side by side, which matters with a 45mm projection.

Fitting and replacing

Measure the distance between your existing holes and not the length of the old handle. A 128mm handle will not fit 160mm holes without drilling new ones, which can leave marks on a painted or veneered front. Plan the holes before you drill, since finishes are easy to change and holes are not.

The box holds one lip pull, a fixing kit and installation instructions, and screws are included. No screw length is given, and how the pull attaches is not described. A lip pull is generally fixed from the back with a small standard wood screw, but the Chelsea may differ. Read the instructions in the box against your panel thickness before you drill.

Brass in a bathroom or by the sea

Bathrooms are more humid, so solid brass, stainless steel or quality PVD suit, since thin electroplated zinc alloy can fail in splash zones. Brass and PVD both appear in the Chelsea range. Near the sea the advice changes. Within about five kilometres of the bay or ocean, salt corrodes standard metals, and 316 marine grade stainless steel is the choice there, as it is for salt air and pools. Lacquered satin and polished brass are not suitable for coastal areas. A coastal vanity is therefore a reason to choose the PVD Gunmetal and to wash and dry the handle often. See bathroom vanities.

Caring for each finish

One routine works for every Chelsea finish: warm water, a soft cloth, and drying afterwards. Dull handles are usually hand oil and cooking residue, and warm water with a soft cloth, followed by drying, clears them. Bathroom hardware needs wiping more often because steam leaves marks, and cleaner goes on the cloth and not on the hardware.

Two points are finish-specific. On polish, polish only a piece you know is solid unlacquered brass, since brass polish damages lacquered or coated finishes. Every Chelsea finish is plated, lacquered, PVD or powder coated, so none should be polished. On abrasives, keep pads, steel wool, bleach, ammonia and acids away from all of them, and from powder coated black in particular, because aggressive rubbing can burnish a matte surface and leave permanent shiny spots. Try an unfamiliar cleaner on the back of one handle first.

A short checklist before you order

  • Measure the fixing distance of your holes. The Chelsea fits 96mm and 256mm.
  • Choose the finish by its process as well as its colour, and keep one finish in the room.
  • Allow for the 45mm projection beside walkways and neighbouring doors.
  • Read the box instructions for screw length before drilling.

For another lip pull in stainless steel, see Ferrara lip pull cabinet pulls. For the whole brand, see Momo Handles premium cabinet handles.

Frequently Asked Questions

What hole centres does the Chelsea lip pull come in?

Listings show sizes such as 96mm and 256mm hole centres. Measure centre to centre between the screw holes on your door or drawer to find the size that matches.

How many Chelsea handles does a drawer need?

A narrow drawer usually takes one handle, and a wide drawer often looks and works better with two evenly spaced. Match the size to the drawer width so the pull feels balanced.

Does solid brass change colour over time?

Solid brass can develop a patina with handling and humidity, depending on the finish. Wipe it with a soft dry cloth and avoid abrasive cleaners.

Can I replace existing handles with a Chelsea lip pull?

Yes, if the new pull's hole centres match your existing holes. If they do not, the old holes need filling or the door needs redrilling, so measure before ordering.

Which Chelsea finishes are the darker tones?

Dark Bronze, Gunmetal, Matte Black and Dark Brushed Brass are the deeper tones in the range. Brushed Satin Brass, Bronze and Dull Brushed Nickel are lighter.