Skip to content

Moroccan Tiles

0 Items

Whoops, there are none available in your area

View all products

Moroccan tiles: handmade looks and traditional patterns

Moroccan tile covers a tradition and a style. At its centre is zellige, the handmade glazed tile with a soft shimmer and slight irregularity, along with its elongated cousin, bejmat. Around it sits a wider family of patterned tiles in the geometric, encaustic and tessellated style, which borrow the look without the handwork. This collection holds both: handmade-look glazed tiles in small squares and bricks, and patterned porcelain in squares sized for walls and floors.

The sections below set out what each kind is, where it belongs, how the tiles differ on slip and wall use, and what to plan for in grout, cleaning and ordering. For the handmade squares on their own, see the zellige tiles collection.

Three kinds of Moroccan look in this collection

The range sorts into three groups.

The first is patterned porcelain in the geometric and encaustic style. Tamarama is a modern take on a classic encaustic pattern, Australian made in 300 x 300mm and 6.3mm. Alicante is a federation-style range of six different patterns and colour palettes, Spanish made, in 316 x 316mm and 9mm, with the old-world charm of traditional tessellated mosaics. Airlie is a set of traditional patterned tiles in 200 x 200mm, in three colour mixes.

The second is the handmade-look glazed ceramic. Evelyn is handmade zellige ceramic, hand moulded and shaped, with the colour glaze applied by a skilled craftsman, in 100 x 100mm squares and 50 x 150mm bejmat. Malee is a Spanish made handmade-look range in 130 x 130mm, in gloss and matt satin finishes. Dianna is a Spanish made handmade-look subway at 75 x 150mm with a wavy structured gloss glaze. Sicily is Italian made and hand-crafted, with clear shade transitions and irregularities typical of artisan production.

The third is the plain small square. Soluna is a 150 x 150mm porcelain inspired by the Mediterranean coast, with warm natural tones and soft textures, in matte.

Walls or floors: read the Application line

Not every Moroccan pattern tile can go anywhere. Most patterned porcelain carries Walls and Floors in the Application line, while the handmade-look Evelyn and Dianna tiles carry Wall Tile. Soluna varies: most pages read Walls and Floors, while the Arc Cotto reads Walls and is not slip rated.

Where a tile suits floors, the slip line matters. Tamarama is P3, moderate slip risk, and P3 or greater is the right level for wet areas. Alicante is P3/R10, moderate to high slip risk and suitable for flooring in dry areas, and its Area line reads Indoors dry and covered outdoor areas. Airlie is P3. The Dianna is P2, and the Evelyn is Not rated, which is consistent with their wall-tile use.

The rule that follows is simple. For a bathroom floor or any wet floor, choose a tile whose line states P3 or higher and a wet-area use. For a feature wall, a splashback or a niche, the wall-tile ranges are the natural fit. For a dry living-room or entry floor, the patterned porcelain with a floor application is the choice. The floor tiles collection explains slip and wear ratings in more detail.

Colour

Traditional Moroccan palettes lean on deep blues, turquoise, greens, burnt orange and terracotta, paired with whites and earthy neutrals. If you are unsure about colour, soft earthy tones such as ivory, clay and sage green keep the look lasting and still clearly Moroccan. The colours tagged across this collection run from white and beige through green, blue, black, terracotta and grey, with smaller numbers in brown and orange.

For one colour across the store, the blue tiles collection, the green tiles collection and the terracotta look tiles collection gather tiles by shade.

Variation and imperfection

The Appearance line gives an honest picture. The patterned porcelain is V1, a uniform appearance with minimal to no variation in texture, which suits a repeating pattern. The handmade-look Evelyn is V3, moderate variation, and Soluna and Dianna are V2. Sicily goes further: strong shading, chipping and relief imperfections are part of the look, along with clear shade transitions and dripping rust and iron.

For crisp, even lines, choose patterned porcelain. For a tile that looks made by hand, choose a handmade-look range, which brings chips, shading and soft edges as part of the look. Variation in colour, glaze, texture and size are part of the beauty, and every installation is unique.

Handmade, handmade-look and patterned: choosing

The choice comes down to three questions. How much irregularity do you want? Where will the tile go? How much upkeep will you accept? Real zellige is naturally porous around the edges and benefits from sealing in wet zones, while ceramic and porcelain look-alikes are denser, less porous and generally fine in wet areas without sealing. The tiles in this collection that carry a Maintenance line read Easy to clean, or Easy to clean and maintain.

The patterned tiles collection and the diamond tiles collection cover geometric looks beyond the Moroccan group, and the mosaic tiles collection covers the small formats.

Covered outdoor areas

A few of the patterned porcelains suit rooms beyond the indoor room. The Tamarama Area line reads Indoors and covered outdoor areas, and the Alicante Area line reads Indoors dry and covered outdoor areas. That makes a verandah or a covered entry possible, with the slip line in mind. For open courtyards and paths, the outdoor tiles collection is a better starting point than any of the handmade-look ranges, which are wall tiles.

Formats

The Dimensions lines run from 50 x 150mm bejmat and 100 x 100mm squares through 130 x 130mm, 150 x 150mm and 200 x 200mm to 300 x 300mm and 316 x 316mm patterned squares. The bricks come in 75 x 150mm and 75 x 200mm. The 50 x 50mm or 100 x 100mm square is the most recognisable zellige format, suited to feature walls, niches and powder rooms. Bejmat is the elongated brick of roughly 50 x 150mm, laid horizontally for a linear look or vertically for height in a small space.

For other formats of the same family, the square tiles collection and the subway tiles collection hold the bricks and squares in plainer finishes.

Grout and joints

Grout changes how a Moroccan tile reads. For real zellige with uneven edges, the joint is part of the look, typically wider than for porcelain, at 2 to 4mm rather than 1 to 2mm. The Evelyn handmade tiles need over 3mm, while the Dianna subway needs 1.5mm to 3mm. A wider joint suits an uneven edge.

Avoid a high-contrast grout on a handmade tile, because it pulls every joint into focus and flattens the soft variation that makes the tile worth choosing. A grout one or two shades from the tile, in a soft neutral, lets the tile lead.

Cleaning and care

Most tiles in this collection are Easy to clean or Easy to clean and maintain. A routine for a glazed tile is simple: sweep or vacuum, mop with warm water and a mild detergent, and rinse.

Real handmade zellige asks a little more care. It is naturally porous around the edges and benefits from sealing in wet zones, and the specific tile decides whether sealing or a tighter grouting approach is needed in a shower or on a splashback. Check the product page and ask your installer, and use mild cleaners on a handmade glaze.

Ordering extra

Allow extra for cuts and breakage. Add 10 percent for offcuts and layout changes, or 10 to 15 percent on top of the order, rising to 20 percent for large formats. Allow 15 to 20 percent for real handmade zellige, because of the natural variation in each batch and the extra breakage from irregular edges, and 10 percent for look-alikes. A handmade batch can also be hard to match months later, so buying the extra up front avoids a patch of mismatched colour.

A worked example: a splashback 2.4m wide and 0.6m high is 1.44 square metres. A 100 x 100mm zellige-style tile covers 0.01 square metres, so the splashback takes 144 whole tiles, and with 15 percent for handmade variation the order is 166. A powder room wall 2.4m high and 1.5m wide is 3.6 square metres, which takes 360 tiles, and 414 with the allowance. Mix tiles from several boxes as you lay, so the glaze variation spreads across the wall.

Confirm quantities with your builder or tiler before ordering, and for any handmade-look tile ask the tiler about wastage before placing the order.

Handmade or look-alike

Handmade Moroccan tile asks for planning. Irregular edges produce more breakage when cutting, so allow more wastage. Chipping and shade variation are normal in the handmade ranges, which is the character of the tile. Seal it in a wet zone where the product page asks for it, and use the handmade lines on walls, where they belong.

The look-alikes bring different strengths: crisp, even lines, a repeating pattern, and ease of care. Let the tile lead and keep the other materials simple, which suits a feature wall, a floor panel or a small room.

Worked example for ordering

A patterned entry floor 1.8m by 1.2m is 2.16 square metres, or 2.48 square metres with 15 percent for cuts. A box of the 316 x 316mm Alicante covers 1.00 square metre, so the order is 3 boxes. A patterned tile asks for a dry lay before fixing, so the pattern is centred on the doorway and the cuts fall at the edges where they are least visible.

Choosing a Moroccan tile

Start with the surface you are tiling. For a wall, feature wall or splashback, choose the handmade-look ranges for texture or the patterned porcelain for a clean repeat. For a dry floor, choose patterned porcelain whose Application line says Floors and carries a slip rating. For a wet floor, check for P3 or higher and a wet-area use line, and expect fewer options than on a wall.

Then read the Appearance line, match the grout to the finish and order extra for cuts. The tiles collection sits above this one for the whole range.

Frequently Asked Questions

What is the best tile finish for a bathroom, matte or gloss?

Matte tiles are trending strongly in Australian bathrooms for their contemporary look and practical ability to hide water spots and fingerprints. Gloss tiles reflect light and can make a bathroom feel brighter and larger, but show water marks and smudges more readily. For shower recesses and wet floors, matte or satin finishes with good slip resistance are generally preferred.

How many tiles do I need to order for my bathroom?

Measure your total wall and floor surface area in square metres, then add a 10–15% wastage allowance for cuts, breakages, and future repairs. For complex layouts with diagonal patterns or feature inserts, increase the wastage to 15–20%. Always order all tiles from the same batch (check the shade lot/batch number) as tiles from different batches can vary slightly in colour.

How do I choose between floor tiles and wall tiles?

Floor tiles must have an adequate slip resistance rating (P3 minimum for domestic bathrooms) and be durable enough for foot traffic. Wall tiles can be glazed ceramic, porcelain, or natural stone, they don't need to carry load but should be moisture-resistant. Many Australian renovators choose matching or coordinating floor and wall tiles from the same range for a cohesive look.

What tile size is best for a small bathroom in Australia?

For small bathrooms, tiles between 300 x 300mm and 600 x 300mm often work well on both walls and floors. Smaller mosaic or subway tiles (75 x 150mm or 100 x 200mm) are a classic choice for shower walls. While large format tiles can also work in small spaces, they require a very level substrate and expert installation. Avoid tiles that are too small on floors (like 50 x 50mm mosaics) in large quantities, as the increased grout lines can make a space feel busier.

How do I incorporate feature tiles without over-designing the bathroom?

The most effective approach is to choose one feature zone and use your feature tile there, a full-height shower wall, the bath surround wall, or the vanity splashback area. Keep the remaining surfaces in a neutral or complementary field tile. This creates impact without visual clutter. Limit your palette to two or three complementary materials for a cohesive result.

What is the slip resistance rating I need for bathroom floor tiles?

Australian Standards (AS 4586) require bathroom floor tiles to have a minimum slip resistance rating of P3 for domestic bathrooms and P4 or P5 for wet areas like shower recesses. The Blue Space recommends checking the slip resistance rating of any tile you're considering for floor use, particularly in the shower. Matte and textured porcelain tiles generally offer better slip resistance than polished or gloss finishes.

What is the difference between ceramic and porcelain tiles?

Porcelain tiles are fired at higher temperatures and are denser, less porous, and harder than ceramic tiles. This makes porcelain more water-resistant, more durable, and suitable for both indoor and outdoor applications, including high-traffic floors. Ceramic tiles are lighter and easier to cut, making them a practical choice for bathroom walls and splashbacks. For bathroom floors and wet areas, porcelain is generally the preferred option in Australia.

What exactly is a Moroccan tile?

It's a tile that reproduces the look of traditional Moroccan zellige and encaustic cement tilework: bold geometric or floral motifs, often in a repeating pattern, usually with strong colour contrast between the pattern and the background. Most of what's sold under this name today is glazed porcelain or ceramic printed with that pattern, rather than the hand-cut zellige or poured cement original. That makes it far more affordable and consistent to install, at the cost of the handmade variation collectors look for in the real thing.

Are Moroccan tiles still in style, or are they on their way out?

They've held up well because the pattern reads as a considered design choice rather than a short-lived trend, and it works in both traditional and contemporary rooms depending on the colour palette chosen. Where the look has shifted is scale and placement: instead of tiling a whole bathroom floor, a lot of current use is a single feature zone (a splashback, a shower niche, a powder room floor) with plain tiles everywhere else. That approach ages better than full-room coverage, since it's cheaper to update later if tastes change.

What are the downsides of choosing a patterned Moroccan-style tile?

The main one is visual fatigue in a small space: a bold repeating pattern can overwhelm a room if it's used on every surface, so most bathrooms are better served by treating it as an accent rather than the whole scheme. Pattern-matching also adds cutting time and wastage on-site, since tiles need to line up across a wall or floor rather than being laid at random, so budget slightly more for installation labour and order a few extra tiles to allow for it. Grout colour matters more here too: the wrong grout shade can flatten a pattern that's meant to have contrast.

What's the difference between Moroccan tiles and zellige tiles?

They're often confused because both originate from the same region and design tradition, but they're different products. Zellige refers to individually hand-cut, glazed clay tiles with an irregular, slightly uneven surface and colour variation piece to piece. Moroccan-pattern tiles are usually machine-made porcelain or ceramic with a printed geometric or floral design applied evenly across a uniform tile. If it's the handmade, artisanal look with genuine tile-to-tile variation you're after, that's a job for zellige tiles rather than this range.

Where does this pattern work best in a bathroom?

A shower niche, a full feature wall behind a freestanding bath, or a powder room floor are the most common placements, since they contain the pattern to one zone without competing with tapware, joinery and mirrors elsewhere in the room. Splashbacks behind a vanity are another popular spot, partly because it's a small enough area that a bold pattern doesn't need to be rationed for cost. Keep surrounding tiles, benchtops and cabinetry simple where a Moroccan-pattern tile is the feature, so the eye has one clear focal point.

Do Moroccan-pattern tiles cost more than plain tiles?

Generally yes, because printing or moulding a detailed pattern accurately and consistently across a run of tiles is a more involved manufacturing process than a plain single-colour glaze. The gap narrows the more the pattern is used as an accent rather than across an entire floor or wall, since a smaller area needs fewer tiles. As with any patterned range, check a physical sample against your grout and fixture colours before ordering, since pattern and colour can both read differently under bathroom lighting than they do on a small sample chip.