Nero Mecca soap bottle holders
A soap bottle holder keeps a pump bottle on the wall instead of on the shelf or the floor of the shower. Nero makes four of them in the Mecca range, and each is 304 stainless steel: a single holder, a double, a triple and a triple with a shelf. This page gives the size of each, the bottle hole they share, the finishes and how each is applied, and the warranty lines, so you can choose the holder that matches the bottles you use.
The four Mecca holders
| Holder | Length | Projection | Bottles | Warranty line |
|---|---|---|---|---|
| Single | 52mm holder, 70mm high | 68mm | One | 10 years |
| Double | 165mm long, 23mm overall height | 75mm | Two, side by side | 25 years |
| Triple | 250mm long | 75mm | Three | 25 years |
| Triple with shelf | 410mm long | 90mm | Three, plus a shelf | 25 years |
The triple and the triple with shelf carry a bottle hole of 29.5mm and fit most large pump bottles. The double has cradles sized to suit most soap bottles rather than one brand, so you are not tied to a single refill. The single holder is the compact piece, for one bottle beside a basin or a bath. Each holder arrives with an installation kit.
Working out the space per bottle
The double holder is 165mm long for two bottles, which is 82.5mm for each, and the triple is 250mm long for three, about 83mm for each. The two holders give a bottle the same slice of wall, so the triple is simply a longer version of the double. The triple with shelf is 410mm long, 160mm longer than the plain triple, and stands 90mm from the wall against 75mm, so the shelf adds 160mm of length and 15mm of depth.
Allow room above the tallest bottle so it can be lifted out, about 30mm to 50mm, and measure the screw top of your bottle against the 29.5mm hole before you order. Check the cap of the bottle as well as the neck.
Finishes by holder
| Holder | Finishes |
|---|---|
| Single | Chrome, Matte Black, Brushed Bronze, Brushed Gold, Brushed Nickel, Gun Metal and Matte White |
| Double | Chrome, Matte Black, Brushed Bronze, Brushed Gold, Brushed Nickel, Gun Metal, Rome Bronze and Tumbled Antique Brass |
| Triple | Chrome, Matte Black, Brushed Bronze, Brushed Gold, Brushed Nickel and Gun Metal |
| Triple with shelf | Chrome, Matte Black, Brushed Bronze, Brushed Gold, Brushed Nickel and Gun Metal |
Matte White is offered only on the single holder, and Rome Bronze and Tumbled Antique Brass only on the double. If you want a three-bottle holder, the finish choice is the six common ones. For the finish across other makers, see chrome, black, brushed nickel, gunmetal, gold, bronze, brass and white accessories.
How each finish is applied
| Finish | Process |
|---|---|
| Brushed Bronze, Brushed Gold, Brushed Nickel, Gun Metal, Rome Bronze, Tumbled Antique Brass | PVD |
| Chrome on the triple holders | Electroplating |
| Matte White on the single holder | Powder coating |
PVD is a coating applied in a vacuum, chosen for colour and durability. The base metal is the same in every holder, so the choice of finish does not change the build. For a coastal bathroom, Nero's Zen range is the marine grade option, and it comes in the same colours.
Choosing a holder
| If you want | Choose |
|---|---|
| One bottle beside a basin or bath | The single, 68mm out |
| A shampoo and conditioner pair | The double, 165mm long |
| Shampoo, conditioner and body wash | The triple, 250mm long |
| Three bottles plus a shelf | The triple with shelf, 410mm long and 90mm out |
| A warm or unusual finish on two bottles | The double in Rome Bronze or Tumbled Antique Brass |
The single carries a 10 year warranty line and the other three carry 25 years, so the larger holders have the longer cover.
Mecca holders against other soap bottle holders
| Holder | Size | Build and warranty |
|---|---|---|
| Nero Mecca single | 70mm high, 52mm holder length, 68mm out | 304 stainless steel, 10 years |
| Caroma Liano II | 100mm high, 50mm long, 75mm out, fixed at 48mm | Stainless steel, 20 years |
| Clark Round | Suits 500mL pump bottles | Metal, Matte Black |
| Meir outdoor bracket | 28mm screw top, 68mm out, 69mm long | 316 stainless steel, lifetime |
The Mecca single is the shallowest of the four at 68mm, and the Liano II holder is the shortest at 50mm long. The Liano II holder stands 7mm further out and is 30mm taller, and the Meir bracket is built for an outdoor wall. If you want to hold more than one bottle, only the Mecca double, triple and triple with shelf do it, which is the reason this range has four holders where the others have one.
What comes in the box
| Holder | Box contents |
|---|---|
| Single, Matte White | One holder |
| Double | Holder with fixing kit and instructions |
| Triple | The holder and an installation kit |
| Triple with shelf | The holder and an installation kit |
Check the contents before you start, because the single arrives as the holder alone. The double, triple and triple with shelf each come with the fixings and instructions you need to mount them.
A Mecca shower wall
A holder is one part of a wall, and the Mecca range has the pieces to go with it. The Mecca shower shelf is 469mm long and stands 110mm from the wall, the robe hook stands 55mm out and the triple holder is 250mm long. Together they cover a bottle wall, a shelf and a hook in the same finish. The table shows the widths so you can plan the layout.
| Mecca piece | Length or width | Projection |
|---|---|---|
| Single holder | 52mm | 68mm |
| Double holder | 165mm | 75mm |
| Triple holder | 250mm | 75mm |
| Triple holder with shelf | 410mm | 90mm |
| Shower shelf | 469mm | 110mm |
| Robe hook | 55mm wide | 55mm |
The triple holder with shelf is 59mm shorter than the Mecca shower shelf and 20mm shallower, so the two can share a shower wall if there is room beside the controls. See shower and vanity shelves for other shelves.
Warranty lines in the Mecca range
The Mecca single holder carries 10 years and the double and triple holders 25 years, a split that follows the pieces rather than the finish. Across the Mecca range the line is 10 years on most pieces and 25 on a few, and the Nero Zen marine grade range carries 25 years. If the warranty length matters to you, choose the double, triple or triple with shelf over the single.
Matching the holder to the tapware
Nero designs its accessory ranges to match its tapware, showers and accessories in the same finish name. Choose the holder in the finish of the taps, because a finish name is its own tone and a near name will not match. The finishes in common across the Mecca holders are Chrome, Matte Black, Brushed Bronze, Brushed Gold, Brushed Nickel and Gun Metal.
About the Mecca range
Mecca is a modern range designed in Australia, with matching tapware, showers and accessories in the same finishes, so a holder can sit in a bathroom that already uses Mecca taps. It is the broadest Nero accessory range, with rails, hooks, holders, shelves and toilet brush holders alongside the soap pieces. See Nero bathroom accessories for the full Mecca list.
Placing the holder in a shower
Fix the holder at a height the shortest user can reach and the tallest can see, within an arm's length of the tap or rail and clear of the main spray. The double and the triple are slim, 23mm in section on the double, so they sit flat to the wall. Check that the bottles do not touch a screen, a rail or a niche beside them, and mark the fixing points from the holder itself before you drill.
Clear space and the wall behind
Leave 68mm clear in front of the single holder, 75mm in front of the double and the triple, and 90mm in front of the triple with shelf, and keep the bottles clear of any screen, rail or niche beside them. A holder takes the weight of full bottles, so check the wall behind each fixing point: a timber stud takes a screw directly, plasterboard needs a suitable anchor and tile needs fixings made for tile. Do the position test with the bottles you will use, taped to the wall at the planned height, before you drill.
The holders are for liquid soap in a pump bottle. If your household uses bar soap, a dish does the job better, and if you want hands-free soap at a basin, Nero also makes sensor soap dispensers in the Mecca range, which are covered on liquid soap dispensers.
Beside the other soap pieces
If you prefer a dish or a dispenser, see soap dish holders and liquid soap dispensers, and for all three together see soap dishes and dispensers. The other Nero accessories are on Nero bathroom accessories, and bathroom accessories holds every maker.
Fit check before you order
- Choose the holder by how many bottles you keep on the wall.
- Measure the screw top of the bottle against the 29.5mm hole.
- Leave about 30mm to 50mm above the tallest bottle.
- Pick a finish the holder offers, because the lists differ.
- Remember the single carries 10 years and the others 25.
Pick the holder, then the finish, then the position.
