Skip to content

Phoenix Axia

2 Items

  • $111 Off RRP
    Phoenix Axia Hob Sink Mixer Set Chrome

    Phoenix Axia Hob Sink Mixer Set Chrome

    Checking delivery...
    $638
    $111 (-14%) OFF RRP of $749
    $111 (-15%) off RRP of $749
  • $79 Off RRP
    Phoenix Axia Shower/Wall Mixer - Chrome

    Phoenix Axia Shower/Wall Mixer - Chrome

    Checking delivery...
    $446
    $79 (-15%) OFF RRP of $525
    $79 (-15%) off RRP of $525

Phoenix Axia tapware: dial handle mixers and wall sets


Axia is the Phoenix range with a dial instead of a lever. The handle is a rotating outer ring around a fixed central face that shows the setting, and the spouts are cast in an ultra thin profile. The shapes are asymmetrical and minimal, with black trim detail on some pieces, so the tap looks more like a sculpture than a fitting. It covers the basin, the wall, the shower and the kitchen.

People search for the range as Phoenix Axia, Axia and Axia Phoenix. This page explains how the dial handle works, what each piece is rated for, what is in the box and what to check before the pieces are ordered.

The dial handle

On a wall mixer the handle is a rotating outer dial with a fixed central indicator face. You turn the dial to set the flow and the temperature, and the face shows where you are. It is an ergonomic, easy grip design that gives fine control without a lever to catch on a sleeve. The wall mixer has a European progressive brass cartridge, which controls flow and temperature with one movement.

The basin and vessel mixers use a lever-less handle. There is no lever sticking out: the control is part of the body, with a standard cartridge inside. A lever-less mixer has a clean line, and it leaves nothing to knock. The hob sink mixer is different again, with fine etched grooves on the handle for grip and control.

Piece Handle
Wall mixers and shower mixers Rotating outer dial with a fixed central indicator face
Basin and vessel mixers Lever-less handle on a cast, thin spout
Wall tops Routed handle on a three quarter turn ceramic disc spindle
Hob sink mixers Etched grooves for grip and control

The finishes

Axia is made in chrome, matte black and brushed nickel. Chrome is the plainest and the brightest. Matte black gives the strongest contrast and brings out the thin profile of the spout. Brushed nickel is a soft, warm silver, and it is PVD, a coating bonded to the metal in a vacuum chamber, which resists scratches and tarnish better than ordinary plating. Keep one finish across the room.

Basin and vessel mixers

The Axia basin mixer and the vessel mixer are both rated WELS 6 star at 4.5 litres a minute, which uses the least water of any rating. The basin mixer is the lower choice for an inset or undermount basin. The vessel mixer is a tall mixer for an above counter basin, where the spout must be high enough that the water lands inside the bowl and not on the rim.

Each comes with an installation kit and two 450mm braided flexible hoses, one for hot water and one for cold. The mixer needs one tap hole, and the hoses connect to the isolating taps under the vanity, so check that 450mm reaches from the mixer to the isolating taps in your cabinet. See Phoenix basin mixers.

Wall sets and outlets

Wall mounted pieces keep the bench clear. They come in several forms, and the differences matter at rough-in.

Piece What it is Rating
Wall basin and bath mixer set, 200mm One dial mixer and a cast spout with a 200mm reach, with a free flow aerator for bath use and a breech assembly WELS 5 star, 6 litres a minute
Wall basin and bath curved outlet set, 180mm Two handles with no backplate and a curved 180mm spout, with a breech assembly WELS 5 star, 6 litres a minute
Curved outlet hostess set, 180mm Two wall tops and a spout, with the spout off-centre as pictured WELS 5 star, 6 litres a minute
Wall basin and bath outlet, 200mm A cast spout alone, with a push fit installation and a free flow aerator WELS 4 star, 6.5 litres a minute
Wall top assemblies A pair of three quarter turn handles with a concealed backplate; an option with 15mm extended spindles No WELS rating

The hostess set must be installed as pictured, with the spout to one side. For a centred spout, buy the wall tops and the spout separately. The extended spindle wall tops suit a retrofit, where the tiles are already in place and the standard spindle sits too short. The breech assembly is the part that makes the installation easier: it joins the wall mixer to the spout inside the wall. Free flow aerators are in the box for bath use, which lets a bath fill quickly. See wall top assemblies.

Shower and wall mixers

The shower and wall mixer pairs with a shower, or with a bath or basin spout. It has the dial handle, an energy saving technology, a concealed backplate for a streamlined look, and lead free brass in the standard version. The twin shower and wall mixer controls two outlets, such as a shower and a bath spout. Shower wall mixers do not need a WELS rating, so the rating sits on the shower head. The body goes in before the lining, so settle the position and the finish while the wall is open. See Phoenix shower mixers.

Hob sink mixers

Axia has two hob sink mixers for a kitchen or a laundry. They are 25mm European cartridge mixers with a 360 degree swivel spout and flexible hose connections, so no breech is needed.

Mixer Size Rating
Hob sink mixer set 316mm tall, 166mm height to spout, 220mm reach WELS 4 star, 7.5 litres a minute
Hob sink mixer set with flexible hose 440mm tall, with a velvet touch matte black silicone hose and a handpiece that detaches WELS 5 star, 6 litres a minute

The hose version has a single function handpiece that detaches from its cradle for extended reach, which is useful for rinsing a sink or filling a tall pot. The mixers work at 150 to 500 kPa. Check the overall height against a window or an overhead cupboard before you choose. See Phoenix kitchen mixer taps.

Progressive cartridge or three quarter turn spindle

Axia uses two ways of controlling the water, and the difference changes how the tap feels and how it is fitted. A progressive cartridge, in the wall mixer and the shower mixers, controls flow and temperature with one movement of the dial. Turn it a little and the flow rises, turn it further and the water warms. It is the better choice where a person wants to set a temperature and leave it.

A three quarter turn ceramic disc spindle, in the wall tops and the curved outlet sets, opens and closes one supply with a turn of the handle. A pair of them gives a separate hot and a separate cold control, and the water mixes at the spout or in the basin. There is no washer to wear out, so a spindle does not drip, and it is the simpler part to replace.

Control Found in Best for
Progressive cartridge Wall mixer set, shower and wall mixers Setting one temperature with one dial
Standard cartridge, lever-less Basin and vessel mixers A clean line with one hand control
Three quarter turn spindle Wall tops, curved outlet sets Separate hot and cold taps, retrofit work
25mm European cartridge Hob sink mixers A kitchen or laundry mixer

Planning the wall sets

The wall sets need the most planning, because everything behind the tile is fixed before the lining goes up. First choose the spout length. The 180mm curved outlet suits a wall hung basin close to the wall, and the 200mm spout suits a bath or a wider bowl, so the water clears the rim. Then decide the layout: a single dial mixer and a spout, a pair of tap handles with a spout between them, or a pair with the spout to one side, as in the hostess set.

The plumber needs to know three things before the wall is closed: the type of control, the spout length and the position of each part. The breech assembly in the mixer set and the curved outlet set joins the controls to the spout in the wall, which makes the installation easier but needs the right depth in the cavity. Tell the tiler the plate sizes, because a concealed backplate sits flush and a visible plate needs the tile cut around it.

If the tiles are already on the wall, choose the extended spindle wall tops. They carry the spindle 15mm further out, so the handle sits proud of a thick tile instead of sinking into the wall.

The kitchen and laundry choice

The hob sink mixers are made for a bench or a sink with a hob mounted tap hole. The 316mm mixer with a 166mm spout height and a 220mm reach suits a standard bowl and a standard window sill. The 440mm version with a flexible hose stands higher, so check the sill and the cupboard above the sink. The hose is silicone, with a velvet touch, and the handpiece clips back into its cradle after use.

Choosing the pieces

Your room Choose
An inset basin on a vanity Basin mixer
An above counter basin Vessel mixer
A wall hung basin or a bath Wall mixer set, 200mm
A traditional two-handle look Curved outlet set
A shower Shower and wall mixer, or twin
A working kitchen or a laundry Hob sink mixer with a flexible hose

Fitting and care

A plumber should install every mixer. Check the box against the parts list before the work starts. Clean the finishes with mild liquid detergent or soap and water, and avoid cream cleaners and citrus based cleaners, which are abrasive. Wipe brushed finishes along the grain and dry the tap after use in a hard water area. Clean the aerator if the spray turns uneven.

Before you order

Check the tap hole count and the hose length for a basin mixer. Check the spout height of a vessel mixer against the basin. Decide the wall set by the way the spout is placed, and order the wall tops and the spout separately for a centred spout. Read the rating on the exact piece, because the flow differs between a basin mixer, a wall set and a hob mixer. Choose one finish for the room.

Frequently Asked Questions

How do I know which basin mixer is right for my basin type?

The key factor is the height and style of your basin. For standard inset or semi-recessed basins, a regular deck-mounted basin mixer with a spout height of around 100–140mm works well. However, if you have an above-counter or vessel basin, where the bowl sits on top of the benchtop, you will need a tall basin mixer with a spout height of 180mm or more, otherwise the spout will sit below the basin rim and water will splash onto the benchtop. Wall-mounted mixers offer another option for above-counter basins, with the height controlled by your rough-in position. Always confirm basin rim height before purchasing your tapware.

What is the difference between a bath mixer and a basin mixer?

While bath mixers and basin mixers may look similar, they are not interchangeable. The key technical difference is the water supply connection size. This difference matters because filling a bathtub requires a significantly higher flow rate, a basin mixer simply cannot deliver water fast enough to fill a bath in a reasonable time. Always use tapware specified for bath applications when fitting out a bath, and consult your plumber if you are unsure.

What is a shower mixer and how does it work?

A shower mixer (or shower tap) is the control valve that regulates the flow and temperature of water to your shower. A single-lever mixer controls both temperature and flow with one handle. A thermostatic mixer maintains a pre-set water temperature even if pressure changes elsewhere in the system, a safer and more convenient option, particularly for households with children. Shower mixers in Australia must comply with AS 3718 standards.

What types of bath taps are available in Australia?

Wall-mounted bath mixers and spouts are fixed to the wall above or beside the bath, they create a clean, uncluttered look and suit most built-in and back-to-wall bath styles. Hob-mounted (deck-mounted) bath taps sit on the rim or surrounding ledge of the bath. Freestanding floor-mounted bath mixers are a statement option for freestanding baths, the tapware stands independently on the floor beside or behind the bath and is supplied through plumbing brought up through the floor. Finally, over-bath shower systems combine a bath filler spout with an integrated shower, offering versatility in smaller bathrooms.