Phoenix Gloss MKII: curved mixers and showers in five finishes
Phoenix Gloss MKII refreshes the popular Gloss collection with refined proportions and understated curves, so the mixers are easy to use and the shapes stay soft. It covers basin and vessel mixers, a sink mixer, wall basin and bath sets, SwitchMix wall mixers, a wall shower system and wall outlets, in lead free brass. It is made in chrome, matte black, brushed gold, brushed carbon and brushed nickel.
People search for it as Phoenix Gloss, Phoenix Gloss MKII and Phoenix MK2. This page sets out each piece with the ratings and sizes that decide fit, and how the Cold Start cartridge and the SwitchMix wall system work. For other Phoenix tapware, see Phoenix basin mixers and Phoenix kitchen mixer taps.
What is in the Gloss MKII range
| Group | Pieces |
|---|---|
| Basin tapware | Basin mixer, vessel mixer |
| Kitchen | Sink mixer |
| Wall tapware | Wall basin and bath mixer set, SwitchMix wall basin and bath mixer set 200mm, SwitchMix shower and wall mixer, SwitchMix shower and bath diverter mixer, wall basin and bath outlet 200mm |
| Showers | Wall shower system |
Finishes
Gloss MKII is made in chrome, matte black, brushed gold, brushed carbon and brushed nickel. Chrome is the plainest and the brightest. Matte black is flat and strong against pale tiles. Brushed nickel is a soft silver, brushed gold is warm, and brushed carbon is a dark, brushed finish between nickel and black. The brushed finishes are PVD, a hard coating bonded to the metal in a vacuum chamber, and chrome and matte black are electroplated. Keep one finish across the mixer, the wall set and the shower so the pieces agree.
Cold Start basin, vessel and sink mixers
The basin mixer, the vessel mixer and the sink mixer use a Cold Start cartridge, a 25mm ceramic cartridge that gives cold water only when the lever sits in the centre position. You move the lever to the hot side only when you need hot water, so a quick rinse does not fire up the water heater. The basin and vessel mixers are rated WELS 6 star at 4.5 litres a minute, and the body is lead free brass. The vessel mixer has an extended body height for above-counter basins.
| Mixer | WELS rating | Key sizes |
|---|---|---|
| Basin mixer | 6 star, 4.5 L/min | Brushed carbon version 165mm high, reach 121mm |
| Vessel mixer | 6 star, 4.5 L/min | Extended body for above-counter basins |
| Sink mixer | 5 star, 6 L/min | 283mm high, 263mm deep, reach 220mm, spout height 232mm |
Choose the height from the basin. The basin mixer suits an inset or undermount basin where the spout sits close to the bench, and the vessel mixer is made for a basin that stands above the bench, so the water lands inside the bowl. Each mixer needs one tap hole. The sink mixer has a top swivel, which stops the tap mounting working loose over time, and its 232mm spout height leaves room under the spout for a tall pot. Check the overall height of the sink mixer against the window or the cupboard above the sink. See Phoenix kitchen mixer taps for more kitchen options.
Wall basin and bath sets
The Gloss MKII wall basin and bath mixer set is rated WELS 6 star at 4.5 litres a minute, with a 35mm ceramic cartridge and a screw on spout. A free-flow aerator is in the box for bath installations, which lets the bath fill quickly. The wall basin and bath outlet is 200mm long, 221mm overall with a 196mm spout reach, and is rated WELS 5 star at 5 litres a minute. Measure from the finished tile surface to the centre of the drain to choose the reach, so the water lands in the middle of the basin or the bath outlet.
SwitchMix wall mixers
The SwitchMix pieces are supplied as a rough-in kit that goes inside the wall and a fit-off kit that shows on the face, and the patented cartridge system lets the visible fit-off be changed later without touching the plumbing behind the wall. Some SwitchMix products are sold as the fit-off trim only, so check whether the rough-in kit is in the box before you order. The SwitchMix wall basin and bath set has a 200mm spout reach and a 223mm projection, and is rated WELS 6 star at 4.5 litres a minute.
| Piece | Key sizes | Rating |
|---|---|---|
| SwitchMix wall basin and bath mixer set | Spout reach 200mm, projection 223mm; PVD finish | WELS 6 star, 4.5 L/min |
| SwitchMix shower and bath diverter mixer | 170mm high, 65mm wide | No WELS rating |
| SwitchMix shower and wall mixer | Lead free brass, PVD finish | No WELS rating |
| Wall basin and bath outlet | 200mm, 221mm overall, reach 196mm | WELS 5 star, 5 L/min |
Settle the reach, the handle position and the finish while the wall is open, because the body goes in before the tiles. The diverter mixer switches the water between two connected outlets, and the shower and wall mixer controls a single outlet. See Phoenix shower mixers and Phoenix spouts for other options.
Wall shower system
The Gloss MKII wall shower system puts the mixer, a ceramic 180 degree rotary diverter and a single function hand shower on one solid brass backplate. The diverter switches between the hand shower and a second connected outlet, and the system has dual check valves. It is rated WELS 3 star at 8 litres a minute and works at 150 to 500 kPa, with a 35mm ceramic cartridge.
| Measure | Wall shower system |
|---|---|
| WELS rating | 3 star |
| Flow | 8 L/min |
| Projection | 65mm |
| Backplate | 225mm long, 75mm high |
| Hand shower | 205mm high, 24mm across |
| Distance between tap and hand shower | 140mm |
A shower carries a lower star rating than a basin mixer because it needs a larger flow to rinse, so 3 star is expected. Check the 140mm gap between the tap and the hand shower against tile joints before the wall is tiled. See Phoenix showers for the full range.
Planning the wall
Wall mixers, wall taps and spouts go into the wall before the tiles, so settle the position, the spout reach and the finish while the wall is open. Measure from the finished tile surface to the centre of the drain to choose the reach, so the water lands in the middle of the basin or the bath outlet and clears the rim. Check what sits behind the wall, and fix the body to a nogging or a bracket so it holds. Waterproofing behind the body matters, because a missed seal is a leak inside the wall that cannot be fixed without opening the tiles.
Shower heights and positions
Mark the shower positions on the wall frame before the lining goes up. The centre of a fixed head outlet is usually 2000mm to 2100mm above the finished floor, or 2100mm to 2200mm for a tall household, and a ceiling mounted rain head sits at 2100mm to 2200mm depending on the ceiling height. Wall arms project 300mm to 400mm, and a ceiling arm can be 100mm to 600mm long. A mixer goes at 1000mm to 1100mm from the floor, and a diverter system needs two outlets at different heights, so the plumber must know both before the wall is closed.
Reading the WELS rating
WELS is the Australian water efficiency label, and more stars means the fitting uses less water. A basin mixer can reach 6 star because a basin needs little water. A kitchen mixer sits at 4 or 5 star because a sink needs a larger flow to fill a pot, and a shower sits at 3 or 4 star because the flow has to be large enough to rinse. Wall mixers and shower taps do not require a rating of their own. Read the rating on the exact piece you are buying, and use a licensed plumber to fit it.
Caring for the tapware
Clean the tap with a soft cloth and mild soapy water, then rinse and dry. Avoid cream cleaners, citrus based cleaners and abrasive pads, because they scratch the finish. Dry the tap after use in a hard water area. Unscrew the aerator now and then and rinse it, since scale builds up there first and shows as an uneven spray.
One tap hole or three
A one hole basin takes a single mixer on the bowl. A three hole basin takes a spout in the middle with the hot and cold controls on either side, which is the traditional layout. A basin with no tap hole takes a wall mixer or a bench tap behind the bowl. Hole spacing varies by manufacturer, so check the tap against the basin before you buy, especially if you already own a tap set you want to keep.
Planning a Gloss MKII bathroom
Start with the basin and its mixer height, then the wall pieces and the shower, and settle the rough-in while the wall is open. Choose the finish across the room at the start, because the five finishes read very differently against tile and timber. The curved shapes suit a soft, classic or transitional bathroom and sit well with round basins and rounded vanities.
Before you order
Confirm the finish across the room. Confirm the mixer height for the basin and the tap hole count. For SwitchMix pieces, confirm the kit, whether the rough-in is included, and the spout reach. Check the 150 to 500 kPa range against your supply. Read the rating on the exact piece, because the flow differs between a Cold Start basin mixer at 4.5 litres a minute, a sink mixer at 6, and a shower at 8.
