Shower Accessories Buying Guide
Shower accessories are the small fittings that decide how a shower works from day to day. They hold the shampoo, keep a glass screen standing and swinging, and give a towel somewhere to hang near the water. This collection has three groups: shelves and prefabricated niches for storage, brackets, hinges, knobs, handles and towel bars for glass screens, and a few rails and holders for towels. Start with storage and the screen, because those two decide where the rest goes.
Plan storage before you buy
Shampoo, conditioner and body wash are easiest to reach when they sit between waist and shoulder height, so nobody has to bend or stretch. A wall outside the direct spray, beside or opposite the shower head, keeps the bottles drier. Where children or a seated user share the shower, a second, lower shelf helps, and a double shower can take one long shelf between the two outlets or one per person.
A shelf and a niche answer the same need in different ways. A shelf projects from the wall and can be added to a finished shower. A niche sits inside the wall and has to be planned before the wall is lined and tiled. Both put holes through the waterproof membrane, so each fixing needs sealing, and a qualified waterproofer should complete the work to AS 3740.
Which kind of shelf suits the shower
Shelves come as corner shelves, which use the empty corner of a small shower, and wall-mounted shelves, which can be single or double and go on any wall. Many are made in a finish that matches the tapware. In a rental or short-term home, a shelf that can be removed when you move is the practical choice, and the lease should be checked before anyone drills into tiles. In an existing tiled shower a shelf is the answer, because adding a niche means taking tiles off and redoing the waterproofing. Metal shelves with drainage gaps or an open base let water run off and cut down soap build-up.
Metal shelves in this collection
The metal shelves come from Caroma, Phoenix, Clark and Meir. Details separate them more than length does. The Caroma Urbane II shelf is stainless steel with drainage holes and dual fixings. The Caroma Luna shelf has concealed dual fixings and suits shampoo, soaps and moisturisers, in chrome, satin black, brushed nickel and brushed brass. The Caroma Cosmo metal shelf is made to hang in the shower and has dual fixings. The Meir round bathroom shelf is matte black, made to match the tapware, and comes with standard fittings. The Urbane II shelf has thin edge details and suits a shower or a vanity, and the Luna shelf is made to match Luna tapware and the Luna basin collection.
| Shelf | Length | Projection | Fixing distance | How it fixes |
|---|---|---|---|---|
| Phoenix Radii metal shelf, round or square plate | 449mm | 109mm | 424mm | Brass, fixing kit in the box |
| Phoenix Vivid Slimline metal shelf | 400mm | 100mm | 370mm | Dual fixed concealed bracket, quick level adjustment |
| Phoenix Gloss shelf | 464mm | 105mm | 432mm | Fixing kit in the box |
| Clark round metal shelf | 440mm | 100mm | 400mm | Dual fixed concealed bracket |
| Phoenix Radii stainless steel shelf, marine grade 316 | 471mm | 113mm | Not given | Brushed stainless steel |
| Caroma Cosmo metal shelf | 415mm | Not given | Not given | Dual fixings |
Marine grade stainless steel is also in the range: the Phoenix Radii stainless steel shelf for the shower is made for coastal conditions, and outdoor accessories covers the 316 range in full.
Glass shelves
Two glass shelves sit in this collection, and both are made for the dry wall beside the shower. The Fienza Lillian is a clear 350mm shelf in 8mm tempered glass on zinc and stainless steel brackets, and it cannot be adjusted. The Phoenix Nostalgia is a 500mm glass shelf with brass construction, in a tradition-inspired design for colonial and heritage renovations. The product notes on both say a glass shelf is not to be installed in the shower for safety reasons.
For more shelves, see shower and vanity shelves, Phoenix shower shelves and Caroma shower shelves.
Prefabricated niches
The Radiant Thermaniche niche is made around a one-piece high density polystyrene core with a liquid applied waterproof sealant, so the box is waterproof before any tile goes on. The surface is tile ready and render ready, the board is light enough to handle easily on site, and a sharp knife or fine saw cuts it. It suits stud walls and double brick walls, and washers and screws come with it. The board has a compressive strength rate of 300kPa, which is 30 tonnes per square metre, and it is CFC and HCFC free. Its waterproof surface lets it work in wet rooms, showers, external walls, balconies and patios.
| Niche | External size | Internal size |
|---|---|---|
| 355 x 355 | 355mm by 355mm | 325mm by 325mm |
| 365 x 425 | 365mm by 425mm | 340mm by 400mm |
| 355 x 605 | 355mm by 605mm | 330mm by 580mm |
| 260 x 905 | 260mm by 905mm | 235mm by 880mm |
Every niche has an external depth of 70mm or 90mm and an internal depth of 60mm or 80mm. For placement, sizing and waterproofing detail, see shower niches.
Check the glass thickness first
Screen hardware is cut to the thickness of the glass, so confirm it before anything is ordered. The Nero hinges, brackets, knobs, handles and towel bar are made for 10mm glass, and the Meir glass fixing U bracket suits 8mm and 10mm glass. The table sets out what each part does and the figures that matter for fitting.
| Part | Job | Fitting facts |
|---|---|---|
| Nero glass to wall hinge, 90 degrees | Hangs a door from the wall | One side plate with three wall fixing holes, 50mm wall fix screws, opens inward and outward |
| Nero glass to glass hinge, 180 degrees | Hangs a door from a fixed panel | Opens inward and outward, self-closing from about 30 degrees |
| Nero U-shaped bracket | Holds glass at 90 degrees to wall or floor | Friction-fix, brass |
| Nero 90 degree glass to wall bracket | Same connection with a square profile | 50mm wide, 67mm high, 50mm deep |
| Nero F-shaped bracket | Holds glass where the fixing point is some distance from the glass edge | Square profile, 90 degree connection to floor or wall |
| Nero over panel fitting | Fastens a glass lid to a side or return panel | 90 degree glass to glass bracket |
| Nero round knob set | Pulls the door from either side | 25mm round with grooves, 40mm each side, one 12mm hole |
| Nero square handle set | Pulls the door from either side | 70mm by 50mm, 24mm each side, two 12mm holes |
| Nero shower towel bar | Hangs a towel on the screen | 500mm, 25mm round bar, D-shaped |
| Meir glass fixing U bracket | Holds glass in a channel | 50mm wide, 21.5mm internal channel |
Door weight, width and the maker ranges
Door size sets the number of hinges. Two Nero hinges carry a door up to 35kg and three carry up to 52.5kg, for a door no wider than 800mm. They are fixed with hex head machine screws, and the 180 degree hinge has a bevelled profile and swings both inward and outward. The glass to wall hinge adds 50mm wall fix screws to its hex head screws. The Meir range covers glass to glass and glass to wall hinges and a round door handle, all in solid brass with a PVD lustre bronze finish, and the handle is two back-to-back pieces with double circular grooves, so it pulls from either side. Drill the glass to suit the handle or knob before ordering the hardware. See shower screen hardware, Caroma shower screen hardware and Meir shower door handles and screen brackets for each range.
Parts for a glass shower screen
Glass shower screen accessories fall into three groups: parts that hang the door, parts that hold fixed glass, and parts you grip or use. Hinges hang the door, brackets and the over panel fitting hold the fixed glass, and knobs, handles and the towel bar are the parts you touch. The towel bar is sold as a rail and knob set.
Finishes
Nero screen hardware comes in brushed gold, brushed bronze, gunmetal, chrome, brushed nickel and matte black, so one finish can run through the hinges, the handle and the towel bar. The Meir glass to wall hinge comes in five finishes.
Rails, holders and the shower set
The Phoenix Lexi MKII range adds single and double rails for towels, 600mm to 800mm long, in zinc alloy with dual fixing, plus a matching holder for toilet rolls. The rail and shower set itself has its own page at shower on rails.
Other shower extras
A glass squeegee, a drain hair catcher, a shower mirror and a non-slip mat are common shower extras sold elsewhere on the site. Squeegees have their own page at squeegees.
Fixing and the wall behind
The shelves list a fixing kit in the box, and the Nero hardware comes with screws and installation instructions. Check what is behind the tile before fixing anything that will carry weight. Plan niche positions before the wall is lined and tiled.
Where to go next
For fittings outside the shower, browse bathroom accessories. For rails that give a firm hold, see grab rails.