Skip to content
Launching soon in NZ
Launching soon in NZ

Telbix Keon Downlight

0 Items

Whoops, there are none available in your area

View all products

Related Searches

Telbix Keon downlight

Keon is Telbix's downlight range, distinct from its pendant and wall light ranges, and built specifically for recessed ceiling installation rather than a hanging or wall-mounted fitting.

What a Keon downlight suits

Downlights like Keon sit flush in the ceiling, so they suit spaces where you want even, low-profile lighting without a visible fitting hanging down, such as hallways, kitchens, and living areas with standard ceiling heights. Three Keon products are stocked at the moment; check each listing for the exact size and colour temperature options.

LED downlights and colour temperature

Keon downlights are LED, which means lower running cost and a longer lifespan than older halogen downlights, but the colour temperature (measured in Kelvin) still matters for how the room feels. Warm white (2700K-3000K) suits living and bedroom spaces, while cool white (4000K+) suits kitchens and bathrooms where task brightness matters more than ambience.

Installing downlights

Recessed downlights need a ceiling cavity of sufficient depth and, in most cases, a licensed electrician for installation, since they involve mains wiring. If you're replacing existing downlights, confirm the cutout size matches before ordering, since downlight diameters vary between ranges and brands.

Common Telbix Keon downlight questions

Q: Is the Keon downlight dimmable?
A: Check the individual product listing for dimmable compatibility, since this varies by SKU even within one range.

Q: What colour temperature should I choose?
A: Warm white (2700K-3000K) suits living areas and bedrooms; cool white (4000K or higher) suits kitchens and bathrooms where brighter, task-focused light is more useful.

Q: Do I need an electrician to install a Keon downlight?
A: Yes, downlights involve mains wiring and ceiling cavity work, so installation should be done by a licensed electrician.

Q: What size cutout does a Keon downlight need?
A: Check the specific product listing for the cutout diameter, since this can vary between models even within the same range.

Q: Can Keon downlights be used in a bathroom?
A: Only if the specific model has an IP rating suited to a bathroom's moisture exposure. Check the product listing before installing in a wet area.

---

Frequently Asked Questions

What types of lighting should a bathroom have?

A well-designed bathroom lighting scheme uses three types: ambient lighting (general illumination, such as a ceiling light or downlights), task lighting (focused light for grooming, typically beside or above the mirror), and accent lighting (decorative LED strips, feature pendants, or night lights). Relying on a single ceiling light is the most common lighting mistake in Australian bathrooms, it creates unflattering shadows on the face and leaves the room feeling flat.

What IP rating do bathroom lights need in Australia?

In Australia, bathroom lighting must comply with AS/NZS 3000 wiring standards, which require specific IP (Ingress Protection) ratings based on the zone within the bathroom. Zone 1 (inside the shower or bath area) requires IP65 rated fixtures minimum. Zone 2 (within 0.6m of a bath or shower) requires IP44 minimum. Outside these zones, standard IP20 rated lights can be used. Always check the IP rating of any light fitting before installing it in or near a wet area.

What colour temperature is best for bathroom lighting?

For bathroom tasks like applying makeup or shaving, a colour temperature of 3000K–4000K (warm white to neutral white) is ideal as it renders skin tones naturally and accurately. Colour temperatures above 5000K (cool daylight) can appear harsh and clinical. If you want a relaxing, spa-like ambience, lean toward 2700K–3000K for a warm, flattering glow.

Are LED lights suitable for bathroom use?

Yes, LED lighting is the standard choice for Australian bathrooms. LED lights offer significantly lower energy consumption, longer lifespan (up to 25,000 hours), and are available in a full range of colour temperatures and dimmer-compatible options. Look for LED lights from reputable brands like Eglo, Brilliant, and Martec (available at The Blue Space) that carry appropriate IP ratings for your intended installation zone.

Can I install bathroom lighting myself?

In Australia, all electrical work including the installation of new light fittings must be carried out by a licensed electrician. Replacing a like-for-like fitting in the same location may be a grey area in some states, but for any new circuits, new switch positions, or wet area installations, a licensed electrician is required by law. Always obtain the appropriate Certificate of Compliance from your electrician after installation.

select-your-country

Where Are You Shopping From?

Switch to your local store for faster shipping and local deals.

Select your country