Skip to content

Thermogroup Round 18mm Bevel Edge Mirror

0 Items

Whoops, there are none available in your area

View all products

Thermogroup round 18mm bevel edge mirrors buying guide


These Thermogroup round mirrors are plain frameless glass with an angled, polished bevel around the edge, in five diameters from 500mm to 900mm. The bevel takes the place of a frame: it gives the edge a line that catches the light, and the rest of the mirror is the glass. The practical call: choose the diameter against the vanity, hang the centre at eye level, and plan the two hanger positions before you drill. The sections below take each step.

What a bevelled edge means

A bevelled edge grinds and polishes the edge of the glass plus part of the face beside it, and the width of the bevel depends on how much surface is ground. A bevel needs more sophisticated, slower machinery than a flat polished edge, it is a safe edge to handle, and on an unframed single mirror a bevel can imitate a bevelled frame. A flat polished edge suits several mirrors installed side by side, or a single unframed mirror where the look is minimalist.

That makes the choice simple. A bevel gives a round mirror an edge detail without a frame, and a polished edge gives the plainest look. The 18mm bevel gives the range its name. For the polished edge round, see Thermogroup mirrors.

The five sizes

The Thermogroup Round 18mm Bevel Edge Mirror comes in 500mm, 600mm, 700mm, 800mm and 900mm diameters. A round mirror is as tall as it is wide, so each size is also its height. Each is part of the Kent range: a 14mm silver mirror with a bevel edge, supplied with a two-part aluminium hanger, and installed in portrait or horizontal orientation, which for a circle means the hanger position is the only choice.

The hanger fixing distance depends on the size: 190mm for the 500mm, 220mm for the 600mm, 260mm for the 700mm, 350mm for the 800mm and 390mm for the 900mm. The hanger is 90mm by 90mm. The 700mm, 800mm and 900mm sizes have a demister option, a heated pad on the back that prevents condensation after a hot shower. For the pads see mirror demisters.

Glass, backing and the edge

The glass is copper-free with a safety backing film. The film reduces the risk of injury if the mirror breaks and resists corrosion over time. The mirror also has a commercial strength vinyl backing, and edges sealed so the mirror does not develop foil creep, which is the silvering lifting from the edge. Moisture gets into a mirror through the edges and through tiny scratches in the protective paint on the back, and copper-free or edge-sealed glass slows the oxidation that causes black spots. For a frameless round, the edge is the part that meets the humidity, so those details matter.

Why a round

Round is a soft circle that contrasts with straight lines in a modern bathroom, large rounds work as focal points, and smaller ones work in pairs above a double vanity. Round mirrors suit pedestal basins and bathrooms with many hard surfaces. They break up the rigidity of straight lines, suit small spaces such as bathrooms, and can make a small space feel larger because the lack of sharp corners supports a calmer feel. For the shape group see round mirrors.

The demister option

A mirror fogs when the glass is colder than the air, so steam condenses on it. The Thermogroup demister pad warms the glass to reduce that difference. The pad must be smaller than the mirror, for a screw-to-wall mirror the pad has to sit clear of the screws and brackets, and the pad only needs to cover the main viewing area. On these mirrors the hanger is 90mm square on the back, so the pad has to be placed around it. The pad is hard-wired to a supply by a qualified electrician. Plan the supply point before the wall is closed.

Size against the vanity

The clearest width rule is this: when the mirror is not the same width as the vanity, make it 70 to 80 per cent as wide, and 60 to 70 per cent when sconces share the wall. Turn the rule around for the five sizes. A 500mm round suits a vanity about 625mm to 715mm wide. A 600mm round suits one about 750mm to 855mm, and a 700mm round suits one about 875mm to 1000mm. An 800mm round suits one about 1000mm to 1145mm, and a 900mm round suits one about 1125mm to 1285mm.

With sconces on the wall, a 600mm round suits a vanity about 855mm to 1000mm wide, and a 900mm round suits one about 1285mm to 1500mm. Tape the outline to the wall and look at it from the doorway. A round looks smaller than a rectangle of the same width, because it has less area at the corners, so err towards the larger size.

Height on the wall

Hang the mirror so its centre meets your eyes. Put the centre at 1500mm to 1650mm from the floor, with 100mm to 200mm between the tap and the base of the mirror and the top edge at least 100mm below the ceiling. A mirror needs to reach about 30cm above and below the eye line of its users.

Hanging the mirror

The fixing is a two-part aluminium hanger, and the fixing distance depends on the size. Mark the two hanger positions on the wall at that distance apart, on a level line, with the mirror's centre at eye level. Hang the mirror by its strap hangers onto two hooks securely fixed to the wall, and do not use picture wire or chain. The mirror comes with metal hangers for straightforward wall mounting.

Studs are the most secure fixing and cavity anchors suit plasterboard without a stud, and that a mirror over 100cm should be lifted by two people. A 14mm mirror is heavier than a 5mm mirror of the same size, so a 900mm round deserves a stud or a rated anchor and a second person. Mark the two hanger positions first, then check what is behind them.

Small bathrooms and powder rooms

A mirror 600mm to 900mm tall suits most single vanities, and 150mm to 200mm should stay clear above a mirror from cabinets or exhaust fans. The 600mm to 900mm rounds fit that range exactly. In a small room larger mirrors reflect more light, so the 700mm or 800mm round is a good choice for a compact vanity if the wall allows. Allow for wall lights: when sconces share the wall, the width falls to 60 to 70 per cent of the vanity.

Matching the room

A bevelled round is a plain mirror, so the room supplies the finish. Match fittings for a cohesive look, or contrast on purpose, and in a small room use one or two finishes. The bevel's bright line suits chrome and brushed nickel, and sits quietly beside black or brass without competing. A round also pairs with other curved elements, such as a round basin or an arch in the tiles. For a framed round see framed mirrors.

Care and cleaning

Clean the glass with a soft microfibre or lint-free cloth rinsed in warm water and wrung out, then wipe gently with a soft dry cloth. Avoid glass cleaner, window cleaner and chemical agents, because they can damage the silver coating. Avoid ammonia, Windex-type products and vinegar, and do not spray liquids onto the mirror or frame. Keep liquid off the bevelled edge, and check the fixings once a year.

Wipe the glass last and dry the bevel with a separate cloth, so any water carried along the edge does not dry as a mark.

Bevel edge or polished edge round

The same Thermogroup range includes a polished edge round in 500mm to 900mm diameters, with 5mm silver glass and a two-part aluminium hanger. The bevel edge round here uses 14mm glass, so the two differ in thickness as well as in edge. The polished edge round is a thinner, plainer mirror and the bevel edge round is a thicker mirror with an edge detail. If you are pairing a round mirror with other glass-edge mirrors in the same bathroom, a flat polished edge suits several mirrors installed side by side. Compare the two before you choose.

Check the circle on the wall before you order. Cut a circle of paper or tape the outline at the diameter you are considering, hang it at eye level and stand at the basin. Look at the edge against the tap, the wall lights and the tile line, because a round has no flat side to line up against and any clash shows straight away. Check the top of the circle against the ceiling and the base against the tap, then step back to the doorway for the full view.

Look after the bevel as part of the glass. Dust collects in the angled edge, so wipe it with a dry microfibre cloth first and a damp one second, always in the direction of the edge, and dry it at once. A bevelled edge reflects light, so a smeared bevel shows from across the room even when the face is clean.

Choose the bevel when the mirror is the only decoration on the wall. If the wall already carries a tile pattern, a shelf or a strong frame, a polished edge round is quieter and lets the other elements lead.

Choosing quickly

  • A narrow vanity: a 500mm or 600mm round.
  • A single vanity: a 700mm or 800mm round.
  • A wide vanity: a 900mm round.
  • A double vanity: two 500mm or 600mm rounds, one over each basin.
  • A steamy ensuite: the 700mm, 800mm or 900mm round with the demister option.
  • A plain, frameless look: the bevel edge, which gives an edge line without a frame.

The final check is the same for every mirror: diameter against the vanity, height against the eye line, hanger positions against the wall, and the edge against the room's humidity. For the overview see mirrors, for glass-edge mirrors frameless mirrors, and for the wall browse wall mirrors.

Frequently Asked Questions

How do I install a bathroom mirror safely?

Bathroom mirrors should be hung using appropriate wall anchors rated for the mirror's weight, or using an adhesive mirror system if recommended by the manufacturer. In tiled bathrooms, use tile drill bits and nylon wall plugs to avoid cracking tiles. For large or heavy mirrors, it's recommended to have a licensed tradesperson handle installation, and always ensure the mirror is fixed securely to avoid the risk of it falling.

What is a mirror with a demister pad?

A demister pad is a heated element bonded to the back of the mirror that gently warms the glass surface, preventing condensation from forming. This means your mirror stays clear even in a steamy bathroom. Demister pads are a popular upgrade in Australian bathrooms, particularly in cooler climates or smaller bathrooms where steam builds quickly.

What size mirror should I hang above a vanity?

As a general rule, your bathroom mirror should be the same width as or up to 50–100mm narrower than your vanity. For a 600mm vanity, a 550–600mm mirror works well; for a 1200mm double vanity, a 1100–1200mm mirror or two individual mirrors side by side suit the space. Height is flexible, most bathroom mirrors sit between 700mm and 900mm tall, depending on ceiling height and user preference.

Should I choose an LED mirror or a standard mirror for my bathroom?

An LED mirror provides built-in lighting that illuminates the face evenly, which is ideal for grooming, makeup application, and shaving. Many LED mirrors also include demister pads to prevent fogging after a shower. A standard mirror is a cost-effective, timeless choice when the bathroom already has good ambient and task lighting. If your bathroom lighting is limited or positioned overhead, an LED mirror is a worthwhile upgrade.

What types of bathroom mirrors are available in Australia?

Australian bathrooms commonly feature flat-mounted wall mirrors, LED-backlit mirrors, frameless mirrors, framed mirrors, and shaving cabinets with mirrored doors. Shape options include rectangular, round, oval, arch, and pill-shaped mirrors. The Blue Space stocks all of these styles from brands like Ingrain, with options that suit everything from minimalist to Hamptons-style bathrooms.

What is a shaving cabinet and how is it different from a bathroom mirror?

A shaving cabinet is a recessed or surface-mounted wall cabinet with a mirrored door (or doors) on the front. Unlike a flat bathroom mirror, a shaving cabinet provides internal storage for medicines, razors, skincare products, and other bathroom essentials. Many modern shaving cabinets also feature integrated LED lighting, shaving points, and demister pads, making them a highly functional addition to any bathroom.