Skip to content

Thermogroup Single Bar Heated Towel Rails

0 Items

Whoops, there are none available in your area

View all products

Thermogroup single bar heated towel rails buying guide

A Thermogroup single bar is one heated bar, vertical or horizontal, sold on its own. For most bathrooms the right call is a set of three or more bars stacked side by side, which gives the look of a ladder and enough heated surface for several towels. A single vertical bar on its own suits a narrow wall or a powder room. The range runs in 12V and 240V, in round, square, straight and flat profiles and in finishes from polished stainless steel to pastel colours. This guide sets out the range with the real specifications.

Why a set of three or more

Thermogroup single bars are designed to be installed in a series of rails limited only by your imagination. A minimum of three single rails gives enough heated surface in contact with the towels to help them dry. They can be stacked to create a towel ladder look. A single bar has less surface contact than a ladder, so it dries a towel less well. A vertical Thermorail heats to around 35 degrees, and a towel placed over the bars insulates the rail and lifts the temperature under the towel to between 50 and 55 degrees. Use one bar per towel. Because each rail is sold on its own, decide how many you need before you order.

The vertical bars

Vertical bar Size Power and rating Notes
12V straight round 142mm by 900mm, 100mm deep 12V, 22 to 30 watts, IP55 Transformer included, optional hook
12V round triple tube 75mm by 900mm, 100mm deep 12V, 27 to 39 watts Transformer included
12V straight square 42mm by 900mm, 100mm deep 12V, 30 watts, IP55 Transformer included, optional hook
12V flat pill 50mm by 900mm, 50mm deep 12V, 20 to 25 watts, IP55 Transformer included
240V vertical 142mm by 900mm, 100mm deep 240V, 20 watts, IP65 No transformer, optional hook, concealed or exposed wiring
Thin 240V vertical 45mm by 900mm, 80mm deep 240V, IP55 Hardwired only, top wiring position
12V pastel verticals 900mm high 12V, 30 watts, IP55 Lilac Satin and Dusty Pink

The horizontal bars

Horizontal bar Size Power and rating
12V round single 632mm by 32mm, 100mm deep, mounting points 600mm apart 12V, 18 watts, IP45
12V square single 632mm by 40mm, 100mm deep 12V, 23 watts
12V square single, long 832mm long 12V, 30 watts, IP45
12V flat pill 632mm long 12V, 13 watts, IP45
12V round, short 450mm long 12V, 14 watts, IP45

The horizontal bars have right-hand concealed wiring, and the transformer is included with each rail. The single bar heated towel rails collection holds single bars from every brand.

Choosing a profile

  • Round bars are the classic shape. The straight round vertical is 142mm wide, and the round triple tube is a slimmer 75mm.
  • Square bars suit straight lines. The straight square vertical is 42mm wide, and the square horizontals are 632mm and 832mm long. The square heated towel rails collection holds the other square rails.
  • Flat pill bars have a soft, flat profile. The vertical is 50mm by 50mm, which keeps it close to the wall, and the horizontal is 632mm long.
  • The Thin 240V vertical is the slimmest, at 45mm wide.

Sets of verticals and horizontals

Plan the set on the wall before the wiring is run. Each bar needs its own connection, so the cable position, the lead length and the spacing all have to be set before the wall is lined. Three 142mm verticals side by side take about 430mm of width plus spacing, and three 632mm horizontals stacked at an even spacing read as one ladder. Three 20 watt 240V bars draw 60 watts in total, and three 18 watt 12V horizontals draw 54 watts.

12V or 240V

  • 12V rails run from a transformer. A 12V rail can go anywhere in the bathroom, including Zone 1, as long as the transformer and any timer or switch are placed correctly for their IP rating. The transformer must sit outside Zone 2, within 2 metres of the rail, with adequate access and ventilation, and a 12V rail can only be hardwired. The 12 volt heated towel rails collection holds the full range.
  • 240V rails connect straight to mains power with no transformer. Most Thermorail 240V rails are IP55 and must be at least 600mm from a water source or spout. The 240V heated towel rails collection holds them.

Heat is set by wattage, not voltage. A 12V rail and a 240V rail of the same size and wattage give off the same heat. Use a 240V rail outside Zone 1 where you can, and a 12V rail if the rail must sit in Zone 1.

Which Thermogroup bar suits which wall

  • A narrow wall beside a door or vanity: a 142mm vertical, or the 45mm Thin 240V vertical.
  • A wall where projection matters: the 50mm flat pill vertical, which is 50mm deep.
  • A short low wall of about 450mm: the 12V round horizontal, in a set of three.
  • A wall under a window or above a vanity, 632mm to 832mm wide: a round, square or flat pill horizontal.
  • A wall that has no room for a visible rail: the Thermorad in-wall panel behind an existing rail or hook.

Wiring by bar

  • The 12V verticals have concealed hardwired wiring at the top or bottom mounting position, and the transformer is in the box.
  • The 12V horizontals have right-hand concealed wiring, and the transformer is in the box.
  • The 240V vertical has concealed or exposed wiring and needs no transformer.
  • The Thin 240V vertical is hardwired only, with a top wiring position.

Choose the cable side before the wall is set out, and check the lead length against the distance to the connection point: the verticals have a 2 metre lead.

Finishes by profile

Bar Finishes in this collection
12V round vertical Brushed nickel, brushed gold, brushed stainless steel
12V straight round vertical Matte black, polished, brushed brass, gunmetal
12V flat pill Polished stainless steel, matte black, brushed brass, brushed nickel
240V vertical Stainless steel, matte black, brushed nickel, brushed brass, brushed gold, brushed bronze
12V pastel vertical Lilac Satin, Dusty Pink

Sizing and fixing

Measure the wall before the rail. Overall size is the footprint on the wall, and the fixing distance is the distance between the mounts. They are different numbers: the 142mm round vertical is 900mm high with a fixing distance of 780mm, and the 12V round horizontal is 632mm long with mounting points 600mm apart. Set out the holes from the fixing distance, and leave clear wall above and below the bar so air moves around the towels.

Hooks

The straight round, straight square and 240V Thermorail verticals include an optional towel hook that fits at the top of the rail at the time of install. The hook makes it easier to hang a towel over the bar.

Hidden warmth when the wall is full

The Thermogroup Thermorad in-wall panel dries towels without a visible rail. It sits discreetly in the wall cavity behind a towel rail, robe hook or ladder, and it works with any of them. The large panel is 405mm wide and 1150mm high overall, with a heated area of 350mm by 930mm, and it is 25mm thick. It has a maximum temperature of 50 degrees, draws 160 watts, has a 2 metre lead and runs on a programmable timer. It suits a bathroom where matching the finish of the rail to the tapware is hard.

Installing the rail

Have a qualified electrician install and test the rail. Mount it on a flat wall at least 600mm above the floor, with 300mm clear of permanent fixtures. Screw into studs where possible, use anchors on a hollow wall, and protect the rail with a suitably rated RCD circuit. Fit any timer or switch in the zone that suits its IP rating. A rail is hot to the touch, so supervise young children near it.

What a single bar uses

Divide the rail's wattage by 1,000, then multiply by the hours it runs. A 14 watt bar running six hours a day uses 0.08 kilowatt-hours, and a 30 watt vertical uses 0.18. Three 18 watt bars in a set use 0.32, and the 160 watt Thermorad panel uses 0.96. A rail should not run constantly, because heat builds up under the towel. A timer keeps the running hours to the ones that count. The Thermogroup Eco Timer sits behind the switch plate and runs a 12-hour schedule, for 1 to 11 hours at 50, 75 or 100 per cent heat. The TRTS touchscreen timers let you program each day on its own, set all seven days the same, or set one schedule for weekdays and another for the weekend, with a manual override. The controllers and thermostats and Thermogroup timers and thermostats collections hold the full range.

Finishes

The Thermogroup single bars come in polished and brushed stainless steel, brushed nickel, brushed brass, brushed gold and brushed bronze, gunmetal, matte black, matte white and the pastel Lilac Satin and Dusty Pink.

Where to go next

The Thermogroup heated towel rails collection holds the whole Thermogroup range, and the heated towel rails collection compares every brand, size and finish together.

Care

Clean the rail with a soft cloth and a non-abrasive cleaner, because harsh scrubbing and acid cleaners mark the surface. Do not hang anything on the rail that has been in contact with oil, petroleum products or dry cleaning fluids.

Frequently Asked Questions

How do I install a bathroom mirror safely?

Bathroom mirrors should be hung using appropriate wall anchors rated for the mirror's weight, or using an adhesive mirror system if recommended by the manufacturer. In tiled bathrooms, use tile drill bits and nylon wall plugs to avoid cracking tiles. For large or heavy mirrors, it's recommended to have a licensed tradesperson handle installation, and always ensure the mirror is fixed securely to avoid the risk of it falling.

What is a mirror with a demister pad?

A demister pad is a heated element bonded to the back of the mirror that gently warms the glass surface, preventing condensation from forming. This means your mirror stays clear even in a steamy bathroom. Demister pads are a popular upgrade in Australian bathrooms, particularly in cooler climates or smaller bathrooms where steam builds quickly.

What size mirror should I hang above a vanity?

As a general rule, your bathroom mirror should be the same width as or up to 50–100mm narrower than your vanity. For a 600mm vanity, a 550–600mm mirror works well; for a 1200mm double vanity, a 1100–1200mm mirror or two individual mirrors side by side suit the space. Height is flexible, most bathroom mirrors sit between 700mm and 900mm tall, depending on ceiling height and user preference.

Should I choose an LED mirror or a standard mirror for my bathroom?

An LED mirror provides built-in lighting that illuminates the face evenly, which is ideal for grooming, makeup application, and shaving. Many LED mirrors also include demister pads to prevent fogging after a shower. A standard mirror is a cost-effective, timeless choice when the bathroom already has good ambient and task lighting. If your bathroom lighting is limited or positioned overhead, an LED mirror is a worthwhile upgrade.

What types of bathroom mirrors are available in Australia?

Australian bathrooms commonly feature flat-mounted wall mirrors, LED-backlit mirrors, frameless mirrors, framed mirrors, and shaving cabinets with mirrored doors. Shape options include rectangular, round, oval, arch, and pill-shaped mirrors. The Blue Space stocks all of these styles from brands like Ingrain, with options that suit everything from minimalist to Hamptons-style bathrooms.

What is a shaving cabinet and how is it different from a bathroom mirror?

A shaving cabinet is a recessed or surface-mounted wall cabinet with a mirrored door (or doors) on the front. Unlike a flat bathroom mirror, a shaving cabinet provides internal storage for medicines, razors, skincare products, and other bathroom essentials. Many modern shaving cabinets also feature integrated LED lighting, shaving points, and demister pads, making them a highly functional addition to any bathroom.