Wall Shelves Buying Guide
These wall shelves are the Timberline Splice range, in a straight shape with square corners and a curved shape with soft edges. Each shape comes in four lengths, and every shelf has concealed brackets, so nothing shows on the front. They are made for the dry wall of a bathroom, away from the shower. Decide the shape and length first, then the layout and the height. The wall you fix to settles the rest.
All eight shelves
| Shelf | Overall length | Projection | Fixing distance |
|---|---|---|---|
| Splice shelf, 300mm | 300mm | 200mm | 200mm |
| Splice shelf, 450mm | 450mm | 200mm | 300mm |
| Splice shelf, 600mm | 600mm | 200mm | 450mm |
| Splice shelf, 900mm | 900mm | 200mm | Not given |
| Curved Splice shelf, 300mm | 300mm | 200mm | 200mm |
| Curved Splice shelf, 450mm | 450mm | 200mm | 300mm |
| Curved Splice shelf, 600mm | 600mm | 200mm | 450mm |
| Curved Splice shelf, 900mm | 900mm | 200mm | Not given |
Straight or curved
The straight Splice has clean square corners and a sleek, contemporary look that suits a modern bathroom. The curved Splice has a softly curved profile that joins an elegant shape to practical display space. Both use the same hidden internal brackets for a sturdy mounting with no visible fixings. The projection is 200mm on every shelf, so the two shapes sit at the same depth if you mix them on one wall.
Material and finish
Every shelf is certified E0 MDF and particleboard, made in Australia. The finish comes in a wide range of woodgrain or painted colours, so a shelf can be matched to the vanity, the joinery or the wall paint. Treat it as a shelf for display and everyday storage, and keep it out of the direct spray.
How a floating shelf holds
A floating shelf is a lever. The load pushes down at the front and pulls on the fasteners at the top, so the fasteners need solid wood or blocking behind them. A shelf with hidden brackets is screwed to the wall. Adhesive and no-drill mounting are not suited to it at any load, because the lever action pulls tape and glue off the wall.
Studs are typically 400mm apart, and some homes use 600mm spacing. Fasten the bracket into every stud it crosses. Use wall anchors only in holes that fall between studs, as a supplement. A plasterboard-only fixing is limited to light display loads of roughly 2kg to 4.5kg, and anything heavier belongs on at least two studs. In a renovation with the wall open, blocking between the studs lets every fastener land in solid wood. Two fixing points are typical for a shelf up to about 900mm, which matches the two concealed brackets on these shelves. Each stud a fixing hits adds holding strength, so aim for studs wherever the layout allows.
Where studs cannot be hit, a wall anchor or toggle bolt takes over, and the load should stay light. Adhesive options hold only light items, usually under about 5kg to 6kg, and only on smooth, hard surfaces such as tile or glass, so they are no substitute for a screwed fixing. On a painted wall they peel off and can tear the paint, and on plasterboard or wallpaper they can damage the surface. A wall that cannot be drilled calls for a freestanding unit such as a ladder shelf or standing bookcase instead.
Fixing a shelf step by step
You need a stud finder, a level, a drill with bits that suit the screws or anchors, a tape measure and a pencil. Each Timberline shelf ships with a fixing kit and installation instructions, and the 900mm shelves give no fixing distance, so read the instructions before marking those.
| Step | What to do |
|---|---|
| 1 | Find the studs with a stud finder, or measure in 400mm steps from a power point or switch, and mark each one. |
| 2 | Hold the shelf where you want it and centre it with a tape measure. |
| 3 | Set the level on the shelf, adjust until it reads level and mark the fixing positions in pencil. |
| 4 | Drill pilot holes, matching the bit to the screw, or to the anchor where the fixing misses a stud. |
| 5 | Fix the brackets, check the level again and shim behind the bracket if the wall is uneven. |
| 6 | Fit the shelf onto the brackets as the installation instructions show, and check that it sits flat to the wall. |
If the shelf leans forward, shim behind the bracket. If it sags, reduce the load. If the top pulls from the wall, remount the bracket into studs or add blocking. If the front edge drops, move the heavy items back toward the wall. Most failures trace to the same three causes: a plasterboard-only fixing, a bracket that is too light for the load, and studs that were missed.
Depth and load
Each extra bit of depth reduces the weight a shelf can carry, because load at the front edge puts the most strain on the fixings. The Splice shelves project 200mm. Keep heavier items close to the wall and lighter ones toward the front.
Spacing between stacked shelves
| What the shelf holds | Gap between shelves |
|---|---|
| Small decor and jars | 200mm to 300mm |
| Folded towels, boxes and bottles | 300mm to 380mm |
| Tall items | 450mm to 600mm |
| General range | 250mm to 450mm, with 300mm as the safe default |
Add 50mm to 75mm of clearance above the tallest item so it can be lifted out. A gap that is too small makes the wall feel cramped, and one that is too big looks out of proportion. Measure your tallest bottle or stack first, then choose the gap, and keep it the same on every level. For books or magazines, which are usually about 350mm tall, add a few centimetres to the tallest one.
Stacked or staggered layouts
Stacked shelves are the same size, evenly spaced to use the full wall height. Staggered shelves are offset for a livelier look. The layouts below suit shelves of the lengths in this range.
| Layout | How it works |
|---|---|
| Zigzag of three | Centre the middle shelf and offset the top and bottom shelves to opposite sides, about 250mm apart vertically with a 150mm to 200mm offset. |
| Ascending steps | Each shelf sits higher and further along, 200mm to 250mm vertically and 100mm to 150mm sideways, longest at the bottom. |
| Clustered pair | Two shelves about 150mm apart on one side, and a third at least 300mm away on the other side at a different height. A 900mm shelf pairs well with two shelves of 450mm to 600mm. |
| Scatter of five or more | Varied heights and positions, with at least 200mm vertically and 100mm sideways between shelves. |
A descending cascade is the mirror of the ascending steps. It steps down across the wall and suits the space above a console or beside tall furniture. Treat the whole arrangement as a mobile: a long shelf on one side balances two shorter shelves on the other, and a top-heavy group is fixed by adding a small shelf lower down. Repeat two or three colours or finishes across the shelves to tie the group together.
Odd numbers of shelves, three or five, usually look balanced, two suits a small space, and six or more tends to overwhelm. Shelves overlap by roughly a quarter to a half of their length. Leave about a third of each shelf empty.
To plan the layout, tape paper templates or painter's tape to the wall and live with it for a day or two before drilling. Mount the middle shelf first at eye level and work outward, checking each shelf with a level and confirming the spacing before you drill the next.
Height on the wall
A single shelf, or the middle shelf of a group, sits at about eye level, 1200mm to 1500mm from the floor. The lowest shelf sits at 900mm to 1200mm from the floor, and the highest no higher than 1800mm to 1950mm. Above a toilet, leave room above the cistern so the lid stays reachable.
Bathroom use
In a small bathroom, two or three shelves above the toilet or beside the vanity are enough. Two shelves, 200mm to 250mm apart with a 100mm to 150mm offset, suit a narrow wall. Keep shelves out of direct water spray.
Towels on a shelf
A hand towel measures about 400mm by 700mm and a guest towel about 300mm by 500mm. A folded towel is narrower than its full size, so compare the folded size with the 200mm depth and the shelf length. The four lengths, 300mm, 450mm, 600mm and 900mm, let you size the shelf to the number of towels you keep. If you want a towel hanging, see hand towel holders.
What a floating shelf is called
A floating shelf is a wall-mounted shelf attached without visible brackets, and it is common above a toilet or a vanity. A shower niche is the recessed shelf built into a tiled wall, and a shower caddy hangs or sticks inside the shower. The Splice shelves are the floating kind, made for the dry wall.
Other shelves in the bathroom
For shelves with drainage that go in the shower, see shower and vanity shelves. For a shelf that holds towels, see towel shelves. The solid surface shelves are on BelBagno H collection bathroom shelves, and more fittings are on bathroom accessories.