Zanda Visca Round cavity sliding door hardware
Visca Round is a Zanda hardware range built specifically for cavity sliding doors, doors that slide into a pocket within the wall rather than swinging open on hinges. Because the door disappears into the wall cavity when open, it needs a different type of hardware to a standard hinged door, and this collection covers the Visca Round components designed for that purpose.
What makes cavity sliding door hardware different
A hinged door uses a handle that protrudes from the face of the door, along with a latch and hinges set into the door and frame. A cavity sliding door cannot use a protruding handle in the same way, since the door needs to slide flush into the wall cavity without the handle catching on the frame. Instead, cavity sliding doors use flush pulls or edge pulls, hardware that sits recessed into or on the edge of the door face, allowing the door to slide freely into the cavity while still giving you a way to grip and move it. Visca Round hardware is designed around this requirement, giving cavity sliding doors a functional pull point without interfering with the sliding mechanism.
Where cavity sliding doors are used
Cavity sliding doors are common in bathrooms, ensuites, laundries and other spaces where a swinging door would take up floor space that isn't available, or where a cleaner, flush wall finish is preferred when the door is open. Because the hardware sits on or in the door face rather than protruding, it also gives these spaces a more streamlined look compared to a hinged door with a traditional handle and hinges on show.
Buying considerations
Before ordering, confirm the hardware is compatible with your specific cavity sliding door system, since cavity sliding mechanisms vary between manufacturers and the pull hardware needs to suit the door thickness and existing cavity unit. Round styling refers to the shape of the pull itself, so check that it suits the overall hardware style used elsewhere in the home if you are aiming for a consistent look across multiple doors. As with any door hardware, confirm finish and function requirements, such as whether you need a privacy lock function for a bathroom or ensuite, before finalising your selection.
Installation
Cavity sliding door hardware is typically fitted during the door and cavity unit installation process, so if you are renovating and adding a new cavity sliding door, it is worth finalising your hardware choice before the door and cavity unit are installed. If you are only replacing existing hardware on a door that already has a cavity system in place, confirm the fitting dimensions match your current setup before ordering.