Skip to content

All Ingrain Vanities

0 Items

Whoops, there are none available in your area

View all products

All Ingrain vanities buying guide


This page lists every Ingrain vanity: the Contoured, Curved Fluted and Grooved wall hung vanities, the Dandenong and Barrington solid timber vanities, the Round Fluted powder room vanity, the porcelain vanity tops, and the sample packs for the textures. The wall hung ranges share a build and differ in the front, the drawers and the handle, so this guide compares them side by side. For the brand's range guide and the powder room vanity in full, see Ingrain vanities.

Choose in this order

Choose the size and the configuration first, then the top, then the basin, and check the technical drawings for exact dimensions. The same order works for every Ingrain range, because the tap hole and the basin depend on the size and the top. Choose the front last if two fronts both fit the room.

The three textures compared

The Curved Fluted has a grooved, stained timber veneer front with a matching Ash woodgrain melamine interior. It is 500mm deep and 390mm high. It has one large drawer on the 750mm, 900mm and 1200mm sizes and two drawers on the 1500mm, and the drawers push open.

The Grooved has a grooved, stained solid timber veneer drawer front, with timber grain melamine end panels and interior. It is 500mm deep and 380mm high. It has one large drawer on the 750mm and 900mm sizes and two on the 1200mm and 1500mm, and the drawers push open.

The Contoured has solid timber fluting with integrated solid timber drawer pulls, in an Ash finish with a polyurethane coat or in a graphite grey two-pack paint. It is an all-drawer design: two drawers on the 750mm and 900mm sizes and four on the 1200mm and 1500mm.

The choice comes down to the drawer layout and the handle. The Curved Fluted and Grooved have one or two large drawers that push open, and the Contoured has more, shallower drawers with a visible timber pull.

What the three share

All three have a moisture resistant plywood carcase, soft-close runners, and a front in timber or timber veneer. They come in 750mm, 900mm and 1200mm with a centre bowl, and in 1500mm with a double bowl. Each takes a Pure White 12mm porcelain top or No Top, so you can source your own, and the Grooved also offers other porcelain colours. The Curved Fluted adds a full back panel that improves strength and allows a more flexible and secure installation. The basin is sold separately on all of them, from the above counter basins.

Solid timber: Dandenong and Barrington

The Dandenong and Barrington are solid timber wall hung vanities, handcrafted in Australia. They are made from salvaged and reclaimed timber sourced from mills across Australia, and they come in three natural Australian timbers, including Messmate and Blackbutt. They come in 750mm, 900mm, 1200mm and 1500mm, with single or double bowl designs. The finish is a clear polyurethane coat, built from two sealant coats and two top coats for durability and low upkeep, and the interior is fresh white melamine in a high moisture resistant carcase.

Natural timber varies

The Curved Fluted and Round Fluted vanities have a natural timber veneer, so the finish colour can vary and may differ from the photos. The Dandenong and Barrington are solid timber, so the grain and the colour change from board to board. Order a sample pack if the colour matters. The sample packs for the Grooved, Contoured and Curved Fluted vanities let you choose the cabinet finish and the benchtop, and add up to three tapware swatches and five tile options. See the samples collection.

Handles and fluting

Grooves use light and shadow to add depth to a flat front, and handles can interrupt the rhythm of the grooves. A finger pull or push-to-open drawer keeps the texture unbroken. That is why the Curved Fluted and Grooved open by pushing, and why the Contoured integrates its pull into the fluting. A two-pack finish suits grooves, because the grooves increase the surface area to seal. For other ribbed fronts, see fluted vanities, and for rounded ones, curved vanities.

Which Ingrain vanity suits which room

For a calm, modern room with a plain wall, the Grooved is the quiet choice: it has a flat face with a soft texture and a low, shallow cabinet. For a room that wants a feature, the Contoured has the strongest front, with timber fluting and visible pulls, and it suits a vanity that is the focus of the wall. The Curved Fluted suits a room with soft shapes, such as a round mirror and a curved shower screen. The Dandenong and Barrington suit a home that values timber and craft, with a natural, warm palette: white or soft green tiles, brass or matte black tapware, and plants.

The graphite grey Contoured suits a moody room with good light, and pairs with white or Calacatta porcelain and brushed nickel or black tapware. Ash suits a light, natural room, and pairs with white tiles and chrome or brass.

Using the sample packs

The sample packs let you see the finish in your own bathroom before you commit. The Grooved pack includes the Grooved Ash cabinet finish and a choice of benchtop options, and you can add up to three tapware swatches and five tile options from a selection of popular floor and wall tiles that match the style. If a tile is not in the box, you can order a cutting from the tile product page. There are packs for the Grooved, the Contoured, including the graphite grey, and the Curved Fluted. A separate Ingrain Timber Sample Box shows the three natural Australian timbers used on the Dandenong and Barrington.

Porcelain tops

The Ingrain porcelain tops are 12mm thick, in Pure White and other porcelain colours such as Calacatta, with no tap hole or one tap hole. A curved porcelain top is made for the curved vanities, and a flat top suits the rest. Porcelain is non-porous, so it resists stains, and it is hard and easy to wipe, but a thin top is not a place to drop a heavy item or rest a hot hair tool. Because the top is cut to size, check the technical drawing for the overhang and the basin position before you order, and confirm the tap hole with the plumber.

A timber top on a timber vanity makes the cabinet look like a piece of furniture, and it needs the same care as the cabinet: wipe water off promptly and keep hot items off it. A White Evostone top on the Barrington gives you a stone-look surface in a light colour with a timber cabinet below, which is a good combination in a room with a lot of timber elsewhere. The Barrington suits white matt floor tiles, a blue gloss wall tile, a pill-shaped frameless backlit LED mirror and brushed gold tapware, and the Dandenong suits a terrazzo floor tile, a white mosaic wall tile, a matte black wall mixer and a smoke glass pendant.

Tap holes

The wall hung vanities come with no tap hole, for a wall-mounted tap, or with one tap hole for a bench-mounted tap. Confirm the tap hole configuration of a pre-drilled top before you order it, and choose the tap first. If you choose a wall-mounted tap, its rough-in positions are set before the wall is lined, waterproofed and tiled. See taps and mixers.

The powder room vanity

The Round Fluted is a 400mm round pedestal with a fluted front in Ash stained timber or matte white painted timber, a 410mm diameter top, a single soft-close door and an internal shelf. It comes with no tap hole, for wall-mounted tapware, and we recommend a wall spout between 180mm and 210mm if the vanity sits tight against the wall. See small vanities.

Choose the width

A powder room takes about 400mm to 500mm, a small main bathroom 750mm to 900mm, and 1200mm suits a large single basin or a tight double. A double basin needs about 1500mm in practice. Mark the width and depth on the floor with masking tape, and if you have to turn sideways to pass, the vanity is too wide, too deep or both. Measure depth from the finished wall to the front of the top or basin, not only to the cabinet face. The size pages list each width: 750mm, 900mm, 1200mm and 1500mm.

Fit, height and fixing

Allow about 700mm to 750mm clear in front of the vanity to stand and move, and keep at least 450mm from the centre of the toilet pan to the side of the vanity. A wall hung vanity is set on site, about 800mm to 900mm to the top, by the installer from the users, the basin and the wall. The wall carries the whole load, and a porcelain or timber top adds weight, so check the wall capacity. See wall hung vanities.

Fix a wall hung cabinet to support nogs fitted between the studs. The nog must be wider than the vanity, and the cabinet is secured to at least two studs or nogs. The wall must be plumb and straight, and the cabinet is packed out if not. Run a continuous bead of non-acidic silicone on every edge that meets the wall or floor, use a licensed plumber for the plumbing, and adjust the doors and drawers once the cabinet is fixed. Bathroom furniture should sit at least 300mm from wet areas, and the materials resist moisture but are not waterproof.

Looking after the vanity

Wipe a cabinet with a soft cloth and a weak solution of non-abrasive detergent, and dry any spill. Wipe away pooled water around the basin, and avoid strong chemical cleaners and abrasive pads. On a grooved front, dust collects in the grooves, so run a microfibre cloth or a soft brush along them and wipe the front with a pH-neutral cleaner. Run the extraction fan after a shower, because steam is hard on timber. Do not drag the vanity or stand on it. Porcelain tops wipe clean with a damp cloth, and a timber top wants the same care as the cabinet.

Mirror and more styles

A mirror looks best slightly narrower than the vanity, about 50mm to 100mm in from each side. See mirrors. Every size and style is in the bathroom vanity guide.

Frequently Asked Questions

What is a wall hung bathroom vanity and what are the benefits?

A wall hung bathroom vanity (also called a floating vanity or wall-mounted vanity) is a cabinet that is fixed directly to the wall rather than sitting on the floor. The key benefits for homeowners include a more spacious, modern aesthetic, because you can see the floor underneath, even small bathrooms feel larger and airier. Wall hung vanities are also much easier to clean, as you can sweep or mop straight underneath. They work particularly well in ensuites, powder rooms, and compact bathrooms where every centimetre counts.

Do wall hung vanities require special wall preparation before installation?

Yes. Unlike floor-standing vanities, wall hung vanities must be anchored to solid structural support, ideally wall studs or a solid timber blocking frame installed within the wall cavity. Because the vanity carries the weight of the cabinet, basin, benchtop, and everything stored inside it, standard plasterboard alone is not sufficient. If you are renovating, it is essential to discuss blocking requirements with your builder or plumber before the walls are lined. A licensed plumber or carpenter should always perform the installation to ensure it meets Australian building standards.

What height should a wall hung vanity be installed at?

The standard installation height for a wall hung vanity in Australia is approximately 850mm from the finished floor level to the top of the benchtop. However, this can be adjusted to suit the needs of your household, for example, lowering slightly for shorter users or households with young children, or raising to 900mm for taller adults. One major advantage of wall hung vanities is this flexibility: because height is set at installation, you can customise it to suit your family before the unit is fixed in place.

What size wall hung vanity do I need for my bathroom?

The most popular wall hung vanity sizes in Australian bathrooms are 750mm and 900mm wide, the 750mm suits a single ensuite or powder room, while the 900mm provides a generous benchtop and drawer space for one person in a main bathroom. For shared bathrooms or larger ensuites, consider stepping up to a 1200mm or 1500mm double vanity configuration. Always measure your available wall space and subtract approximately 100mm either side for clearance. Also check the depth, most standard vanities are 460–550mm deep, but slim 400mm options are available for tighter spaces.

What size mirror should I hang above a vanity?

As a general rule, your bathroom mirror should be the same width as or up to 50–100mm narrower than your vanity. For a 600mm vanity, a 550–600mm mirror works well; for a 1200mm double vanity, a 1100–1200mm mirror or two individual mirrors side by side suit the space. Height is flexible, most bathroom mirrors sit between 700mm and 900mm tall, depending on ceiling height and user preference.