Skip to content

Arc Shaped Cabinet Handles

0 Items

Whoops, there are none available in your area

View all products

Arc Shaped Cabinet Handles Buying Guide


Arc shaped cabinet handles curve gently between two fixing points, giving cabinetry a soft, organic line. This collection holds the Momo Handles Fitzroy Arch timber handle in American Oak and Blackbutt, designed and hand crafted in Australia. It suits Japandi, Scandinavian, coastal and mid-century kitchens, vanities and joinery.

What is an arc or arch handle?

An arc handle is a pull that rises in a curve from both ends, so your fingers go behind the arch to open the door or drawer. Arch, arc and bow are often used for the same shape. Unlike a cup pull, which you reach under, an arch pull can be gripped from several angles, so it works on doors as well as drawers.

What sizes does the Fitzroy Arch come in?

The Fitzroy Arch comes in two overall sizes: 100mm with 32mm hole centres, and 150mm with 64mm hole centres. The smaller size suits small drawers, vanity doors and furniture. The larger size suits kitchen drawers and standard cupboard doors. On wide pot drawers, two handles spaced evenly can look more balanced than one. Before drilling, mark the hole positions with a template so every handle sits at the same height across a run of cabinets.

American Oak or Blackbutt?

American Oak has a pale, creamy tone with a visible grain that suits light timber, white and Scandinavian schemes. Blackbutt is an Australian hardwood with a warmer, golden-brown tone that suits natural, coastal and earthy interiors. Match the timber to your cabinetry, floors or benchtop, or choose a contrast for definition.

Raw or oiled finish?

Both timbers are available raw or oiled. Oiled timber has a richer colour and a light protective finish that resists marks and moisture better. Raw timber keeps the natural, matte look and can be finished to match your joinery, but it will absorb more from hands and spills over time.

Are timber handles suitable for kitchens and bathrooms?

Yes, with care. An oiled finish helps the timber handle splashes and grease. In a bathroom, keep timber handles away from direct water spray and wipe them dry. Good ventilation helps any timber in a humid room. Timber handles also feel warm to the touch, which many people prefer to cold metal in daily use.

How do I care for timber cabinet handles?

Wipe with a soft, slightly damp cloth and dry straight away. Avoid soaking, harsh cleaners and abrasive pads. Oiled handles can be refreshed every so often with a light coat of furniture oil to restore their colour.

Completing the room

For curved handles in metal, see bow shaped handles and half moon cabinet handles. Browse more timber options in timber cabinet handles, or see all cabinet handles and Momo handles.

Frequently Asked Questions

What is an arc-shaped cabinet handle?

It's a pull built around a curved section of a circle, an arc, rather than a straight bar. The curve typically runs the visible length of the handle, giving it a rounded, geometric silhouette that reads differently from a flat bar or a fully round handle depending on how tight the arc is.

How is an arc shape different from a bow shape?

Honestly, the two overlap quite a bit, and manufacturers aren't always consistent about which term they use for a given profile. In general, an "arc" describes a handle following a defined segment of a circle, which can look more geometric or rounded depending on how much of the circle it traces, while a "bow" more often describes a shallower, more elongated curve running along a longer pull, as covered in bow-shaped handles. If the exact curve profile matters to your design, it's worth comparing the two ranges side by side rather than relying on the name alone.

How does an arc-shaped handle differ from a straight bar pull?

A standard bar pull runs dead straight between its two fixing points. An arc-shaped handle curves along that same length instead, which changes both the look, softer and more sculptural, and how it sits in the hand, since your fingers wrap around a curve rather than a flat rod.

What size arc-shaped handle suits my drawers?

The usual one-third guideline for bar-style pulls still applies: aim for a handle length around a third of the width of the door or drawer front, and check hole centres (the distance between the two fixing screws) against existing cabinetry when replacing hardware. Because the curve adds visual weight compared with a flat bar of the same length, it can be worth sizing slightly shorter on a very wide drawer front to keep the proportion balanced.

Do arc-shaped handles suit a particular kitchen or bathroom style?

The curve gives it a softer, more considered look than a straight bar, so it suits contemporary spaces that want a geometric feature without going fully traditional, as well as transitional or Hamptons-style rooms depending on the finish. A slim arc in a matte black or brushed finish reads quite differently to a bold, wide arc in a polished metal, so scale and finish do more to set the style than the shape alone.

What finishes are arc-shaped handles available in?

They're typically offered across the same finish range as other cabinet hardware shapes, from matte black and brushed metals through to polished chrome. Matching the finish to your tapware and other fittings matters more than the shape itself for a cohesive result, so check the cabinet handles hub for the full finish-matching guide once you've settled on this profile.