Bottle Traps Buying Guide
A bottle trap is a compact trap that sits under a basin and links the basin waste to the wall pipe. It holds a small amount of water, and that water seal blocks sewer gas and insects from coming back up the drain. The name comes from the bottle shape of its body. This page holds bottle traps in brass and stainless steel, in 32mm and 40mm connections, in finishes that match tapware, for wall hung basins and other basins where the pipework shows. Five questions settle the order: bottle trap or P-trap, the rules, the connection size, the finish and the box contents. For the waste above the trap, see basin wastes, and for every other drain type start at wastes, traps and grates.
What a bottle trap is for
Water drops from the basin into the vertical section of the trap, fills it, then moves into the horizontal section and out to the wall. Some water always stays at the bottom, and that water is the seal. Every time the basin is used the older water is pushed along, so the seal renews itself. The trap also catches debris that gets past the basin waste, which protects the main pipes from blockages, and it lets you recover small items that fall down the drain, such as a ring or an earring.
A trap of some kind is not optional. AS/NZS 3500.2 requires each fixture connected to a sanitary drain to have a trap with a water seal of at least 50mm. A sink without a visible U-bend is non-compliant unless the trap is built into an approved component. Without a working trap, the first sign is usually a bad smell, followed by mould, bacteria and insects such as flies and gnats.
Bottle trap, P-trap or S-trap
The three shapes all create a water seal, and the choice follows the pipework. A bottle trap has a compact cylindrical body and a horizontal wall outlet, and it suits basins where the pipework is exposed: wall hung basins, pedestal basins and above-counter basins. A P-trap is a curved U-bend with a horizontal wall outlet, and it suits plumbing that is concealed inside a vanity cabinet. An S-trap has an S-shaped bend and a vertical floor outlet, which is why it appears where the waste pipe leaves through the floor. A P-trap is usually the better choice when the pipes sit behind a vanity, and a bottle trap is usually the best fit with a tall basin mixer over an above-counter basin.
Choose a bottle trap when the trap will be seen and the outlet is in the wall. Choose a P-trap when it will be hidden. S-traps are common in older Australian homes and can siphon their seal, which is why a plumber replaces them with a compliant type. Bottle traps must not be used on floor-waste outlets, because doing so can cause drainage problems and fail inspection. They are also generally unsuitable for kitchen sinks, where the higher flow and grease can cause blockages and a P-trap is the usual choice.
Is a bottle trap legal
A bottle trap is a trap, so it meets the requirement when it holds the seal and carries the right certification. All bottle traps sold and installed in Australia must be WaterMark certified, and a licensed plumber should connect it to the wall waste pipe. Connecting to a wall waste pipe is licensed plumbing work in all states and territories, and the licensed plumber must issue a compliance certificate. Check your state or territory requirements before starting, and confirm the certification on the trap you choose. The Caroma bottle trap is WaterMark approved, meets Australian Standard AS1589 and has an inspection opening.
32mm or 40mm
Bottle traps come with a 32mm or a 40mm inlet. The 32mm size is the more common on basins and 40mm is the more common on baths and larger fixtures, so a licensed tradesperson can confirm the right one for the setup. A bottle trap usually works with a pop-up waste as long as the thread sizes and diameters match. The number describes the connection: 32mm and 40mm are the internal diameter of the pipe the waste connects to, with a 32mm waste using a 1 1/4 inch BSPP thread and a 40mm waste using a 1 1/2 inch thread. The 40mm traps on this page have a G1 1/2 thread. The Meir round bottle trap is made for a 32mm basin waste, with a 41mm actual basin thread that matches a 32mm pop-up waste, and one variant pairs a 32mm waste with a 40mm adapter.
Wall hung basins and compatible ranges
Wall hung basins are where bottle traps earn their place, because the trap shows. Some traps are made for particular basins. The Caroma 40mm bottle trap is designed for the Liano II, Urbane II and Contura II basins, and it is also compatible with the Carboni II, Care 500, 600 and 700, Concorde, Cosmo, Cube extension and Luna wall basins. It comes supplied with two key seals for copper or plastic connections. The Caroma Modina and Eco traps are designed to suit Caroma wall hung basins, and the Urbane II trap is suited to wall hung vanities and basins with a 40mm connection. The ADP Subway bottle trap is suited to wall hung vanities with a 40mm connection and has adjustable height.
The Phoenix 40mm bottle trap is used under a wall hung basin to hide the plumbing pipes. It adjusts vertically and horizontally, has a removable cap for easy cleaning and suits 40mm pipework. The Nero 40mm round bottle trap suits wall hung basins and a 40mm waste connection, and the Nero 40mm Round Bottle Trap II has a removable bottom for quick cleaning.
Materials and finishes
Most traps here are brass, and some are 304 stainless steel. Chrome-plated brass is the strongest and most corrosion-resistant option, and brushed nickel and matte black traps are usually brass too. Brass is the better choice if the bathroom will be used for more than ten years. The Nero 40mm Round Bottle Trap II is 304 stainless steel, and the other Nero traps are brass with a 40mm G1 1/2 thread.
Check the finish process, because the colour name does not describe it. PVD is a vacuum process that bonds the colour to the metal at a molecular level, and it is much harder than traditional plating. Chrome is electroplated, which is hard, easy to clean and tolerant of strong cleaners. The Nero traps are PVD for most colours and electroplated for the aged brass finish. Some makers offer finishes to match their mixers, so check that the trap matches the tapware and the other metal in the room. Ordering a finish that does not match the mixer, such as chrome with matte black, is one of the common mistakes.
Adjustable traps and renovations
Adjustable components help a trap line up with existing plumbing. They suit different basin heights, wall positions and vanity designs, and they are especially useful in renovations, where small layout differences can complicate a fit. Most bottle traps have adjustable inlets or telescopic arms to line up with the wall outlet, which helps with non-standard installs, and many have removable base caps so build-up can be cleared without dismantling the plumbing. Check that thread sizes and diameters match the basin and the plumbing, or choose a universal-fit trap, and have a licensed tradesperson handle or check the installation.
Traps differ in how much adjustment they offer. The Meir round bottle trap has an adjustable length of 160mm to 385mm, a height of 123mm plus 73.1mm of adjustment and a round plate 70mm across. The Nero 40mm round bottle trap has a product size of 633mm wide by 340mm high. The ADP Waterloo trap has a height of 326.5mm. The Indigo Ciara 40mm trap has a connection 431mm from the wall. Compare those numbers with the distance between the waste and the wall outlet before ordering.
Planning around a wall hung basin
The trap is the last part to go in, and the basin comes first. Check that the wall can carry the weight of the basin when it is full of water. Solid brick or blockwork is the strongest option, and stud walls need reinforcement with timber battens or a frame system. A typical height is about 850mm from the finished floor to the top edge of the basin, adjustable for comfort. Check the layout against the tap hole and the waste position before drilling. The waste flange is sealed with silicone or plumber's putty before it is tightened, and the bottle trap is connected underneath with its outlet aligned to the wall or floor waste connection. Whether a pop-up waste should be sealed with silicone depends on the product, so follow the installation instructions in the box.
Why a bottle trap smells and how to clean it
The common cause is a seal that has gone. A bathroom basin that is rarely used loses the water in its trap to evaporation, and gas can come through. Running the tap briefly, about once a week, replenishes the seal, which matters in guest bathrooms and holiday homes. Running water for about 30 seconds in a rarely used drain often fixes an odour, and a smell that persists points to a ventilation fault, a cracked trap body or a broken seal.
To clear a bottle trap, put a bucket under it, unscrew the removable base cap by hand, tip out the hair and soap, rinse the cap and thread, and refit it hand tight. Turn the tap on and check the joint for drips. Do not use a caustic drain cleaner in a chrome or coloured trap, because it can attack the finish and the seals.
The ranges on this page
Nero supplies the 40mm round bottle trap and the Round Bottle Trap II in a long list of finishes, and its other drains are at Nero wastes and traps. Caroma's traps are collected at Caroma wastes and traps, Meir's at Meir wastes and traps, Phoenix's at Phoenix wastes and traps, ADP's at ADP wastes and traps and Turner Hastings' at Turner Hastings wastes and traps.