Caroma Cleanflush Buying Guide
Cleanflush is Caroma's rimless bowl and flush system, designed and patented in Australia. It is used across several Caroma toilet ranges, including Luna, Urbane II, Contura II, Liano, Riviere and Elvire, in close coupled, wall-faced, in-wall and wall hung suites, so you can choose the look and format you prefer with the same easy-clean bowl.
What is Caroma Cleanflush?
Cleanflush combines three features. The bowl is rimless, so there is no closed rim under the edge where dirt and bacteria can hide. Flow channels direct the water to wash the whole bowl while limiting splashback. A flow balancer delivers a controlled stream to clear the bowl. Every Cleanflush toilet is rimless, though other rimless toilets use different flush designs.
Is a rimless toilet easier to clean?
Yes. Without a rim, you can see and reach the whole bowl, so a brush or sponge cleans every surface and less cleaner is needed. Clean the bowl with a toilet brush and a mild cleaner, and wipe the outside and seat with warm soapy water. Avoid scouring pads, steel wool and wire brushes, which can dull the glaze.
How much water does a Cleanflush toilet use?
The Cleanflush suites in this collection are rated 4 star WELS, with a 4.5 litre full flush and a 3 litre half flush, averaging 3.5 litres. The volume is the same across the ranges; the difference is in how the water moves around the bowl.
Which Cleanflush range should I choose?
Choose by height, shape and finish. Luna has a 395mm pan height and soft rounded lines, with Slim and Square versions. Urbane II has a taller 440mm pan, an optional GermGard seat and a compact wall-faced version with a 500mm projection. Contura II has a curved shape and a 440mm pan, in white, matte white and clay. Liano Easy Height has a 435mm pan for easier sitting and standing, and Riviere pairs a 435mm wall-faced pan with a close coupled cistern in white or matte white.
What cistern formats are available?
Close coupled suites have a cistern sitting on the pan, which is the simplest to install and service. Invisi Series II suites hide the cistern inside the wall, with a flush plate on the wall and a shorter projection of around 570 to 610mm. Wall hung suites, such as the Contura II and Liano, float above the floor for easy cleaning underneath, and need a frame inside the wall.
How do I check a Cleanflush toilet will fit?
Measure the set out: on an S-trap, from the finished wall to the centre of the floor waste; on a P-trap, from the floor to the outlet in the wall. Many Cleanflush pans have a universal trap that suits either. Caroma's Uni-Orbital connector lets the pan move within a 50mm radius, which helps with older waste positions. Check the projection against the space in front of the toilet, and have a licensed plumber install the suite.
Completing the room
Compare suites in Caroma Luna Cleanflush, Caroma Urbane II and Caroma Contura II, or add a seat from Caroma toilet seats and a plate from Caroma concealed toilet buttons at The Blue Space.