Skip to content

Fienza Concrete Basins

0 Items

Whoops, there are none available in your area

View all products

Fienza concrete basins buying guide


These are Fienza concrete basins in Warm White, Warm Grey, Sage, Tuscan and Terrazzo. They sit on the bench or hang from the wall, and none has a tap hole or an overflow. The page holds the Alba round bowl, the Jada round and the Jada pill for the bench, and the Blanca and the fluted arch Valentina for the wall. The guide below covers what concrete means here, and each model with its size, capacity and weight. It then explains why colour varies from the pictures, how the wall hung basins are fixed, which taps suit a basin with no tap hole, and how to clean and look after the sealed surface.

What concrete means here

Every basin on this page is concrete with a food-grade nano sealant. The sealant is what makes a porous material suitable for a wet room. Concrete is naturally porous and needs a sealer to resist stains and moisture, and the sealer is applied during manufacture and absorbs into the concrete. Some makers pour glass fibre reinforced concrete, a lighter and stronger mix. The mix for these basins is not published, so ask us before you rely on it, and no sealer lifespan is published either.

Handcrafted concrete has pinprick holes that are natural, and colour pigment can run through the whole piece. Expect small surface marks and slight differences between pieces. With daily use a concrete product may develop scratches, marks and chipping over time, so the finish ages with use. See concrete basins for the wider range and Fienza basins for the brand.

The models on this page

All five models are non-overflow, have no tap holes and need a 32mm non-overflow waste, which is not included.

The Alba is a round bowl, 362mm by 362mm by 145mm, with a textured outer surface. It holds 7.2 litres and weighs 7kg. It comes in Warm Grey, Warm White, Sage and Tuscan. The Jada round is 390mm by 390mm by 120mm, with an inner depth of 94mm, a capacity of 10 litres and a weight of 9kg, in Warm Grey, Terrazzo, Warm White, Sage and Tuscan. The Jada pill is 600mm by 280mm by 120mm, with an inner depth of 98mm and a capacity of 12.3 litres, in the same five colours. The Jada pill suits a narrow bench because it is long and shallow in projection. See pill shape basins and round basins to compare shapes across makers.

The Blanca is a wall hung basin, 650mm by 300mm by 200mm, with a right hand bowl and an integrated shelf. It holds 8 litres and weighs 22.5kg, in Warm Grey, Terrazzo, Warm White, Sage and Tuscan. The Valentina is a fluted arch wall hung basin, 465mm by 360mm by 119mm, with an inner depth of 97mm, a capacity of 10.5 litres and a weight of 12kg, in Warm White, Warm Grey, Sage and Tuscan. It is the same basin as on the arch basins page, and the fluting is covered on fluted basins.

Weight, and what it means for the bench or wall

The weights run from 7kg to 22.5kg, and the difference decides how each basin is supported. The Alba and the two Jada basins are bench basins at 7 to 11kg. The Valentina at 12kg and the Blanca at 22.5kg hang from the wall. Concrete basins are heavy, so a wall-hung vanity and stud frame must be able to carry the weight, and wall brackets mount directly to wall studs. A basin on a bench adds its weight and the water it holds to the bench, so check the vanity maker's load rating for a floating vanity.

The Blanca is the case to plan carefully. At 22.5kg dry and 8 litres of water, it puts about 30kg on its brackets when full, and the wall behind it needs to carry that. Extra heavy duty mounting brackets and bolts are included, and that is the hardware. The wall reinforcement is the installer's job. See wall hung basins.

No tap hole, so choose the tap first

None of the basins has a tap hole. Freestanding and above counter basins often need wall-mounted or tall deck-mounted mixers so the spout reaches over the bowl, so check the spout reach and the tap hole layout before buying. Wall-mounted taps need to be planned before tiling and rough-in, and a tap's projection should match the distance from its fixing to the centre of the drain. The spout should clear the rim by about 100 to 150mm, and a tall basin mixer is often 250 to 300mm tall.

Two tall mixers on the store give figures. The Kaya Tall has a spout height of 216mm and a reach of 170mm, and the Empire Slim Tall has a spout height of 244mm and a reach of 180mm. The Alba is 362mm across, so the centre is about 181mm from the edge if the drain is central, and a 170mm reach from a tap at the very edge falls about 11mm short. Measure the drain on the basin you receive. See basin mixers.

No overflow, and the waste

Every basin here is non-overflow, and each needs a 32mm non-overflow waste that is not included. With no overflow slot, a basin with the plug in and the tap running has nowhere to send the water, so turn the tap off. Choose the waste when you choose the tap, in the same finish. The drawings show a waste hole and a larger opening around it, so check that the waste you buy fits the hole. See basin wastes.

Rim height and bench depth

A basin on the bench adds its height to the bench. A floor-mounted vanity is 850 to 900mm and a wall-hung vanity 800 to 900mm, with a vanity depth of 460 to 550mm and an accessible rim at 800 to 830mm. A rim at 800 to 850mm is the usual starting point. The Alba stands 145mm high, so on an 850mm bench its rim is at 995mm, and the Jada basins at 120mm put the rim at 970mm. A lower bench, or a wall hung basin set at the rim height you want, is the fix. For a wall hung basin, the rim height is wherever you fix the brackets, so mark it first.

For depth, the Jada pill is 280mm front to back, which against a 460 to 550mm vanity leaves 180 to 270mm behind it for a bench tap. The Jada round at 390mm leaves 70 to 160mm. See above counter basins and small basins.

Cleaning and caring for concrete

Wipe with a clean soft microfibre cloth and mild soapy water or a non-abrasive bathroom cleaner, and test in an inconspicuous area before cleaning the whole basin. Do not use abrasive scour pads, because they can scratch the surface and break down the sealer. Avoid bleach, acetone and nail polish remover, and if the basin is exposed to them, rinse at once with water and then follow the usual cleaning. Direct sunlight can cause concrete to slowly discolour over a long period, and impact on edges and the surface should be avoided. Hot objects such as hair straighteners cause discolouration and marking, and spills of hair dye, after-shave, nail polish remover and aerosol spray should be removed at once with mild soapy water.

Concrete care adds a few habits. Rinse with warm water after use, deep clean every one to two weeks with diluted mild washing-up liquid, and avoid steel wool, scourers and lemon juice. Avoid regularly pouring very hot or very cold liquids, because rapid temperature changes can cause cracking. These are sensible habits for any sealed concrete basin.

Vinegar and acids

Leave vinegar out of the routine for these basins. Acidic substances including vinegar, wine and soda can etch concrete, and acidic cleaners can corrode the sealant. Soapy water and a non-abrasive bathroom cleaner are the cleaners to use. Vinegar suits limescale on glazed ceramic, but not concrete.

No resealing interval is set for these basins, so ask us about resealing before you buy and keep the original care instructions. A sealer is not permanent, and a basin should be resealed regularly. See Kaskade stone basins for a composite alternative with a different care routine.

Concrete compared with ceramic

Ceramic needs mild soap and a soft cloth and no abrasive pads or harsh chemicals, and stone and concrete may need specific sealants and pH-neutral cleaners. Once sealed, concrete basins are about as easy to clean as standard ceramic sinks, and cracking depends on impact and takes a high degree of force, as it does with ceramic.

The practical differences are these. A ceramic basin allows vinegar for limescale, and concrete does not. A glazed ceramic surface does not discolour in direct sunlight, and concrete can slowly discolour. And the concrete carries a colour variation that glazed ceramic does not. If you want a basin with no sealer to look after, see ceramic basins.

Where concrete basins suit, and where they do not

A concrete basin suits a room where texture and colour carry the design: a powder room, a feature wall, a vanity with a plain top. The Alba is the compact option, and the Jada pill and the Blanca suit a narrow room because the bowls are long and shallow. The Valentina brings fluting to the wall.

Three limits are worth stating. The colour will vary from the picture and no sample service is offered. The finish can scratch, mark and chip with daily use. And the wall hung models need a wall that can carry them. If any of those is a problem, a glazed ceramic basin removes the colour variation and the sealer care. See bathroom vanities and bathroom basins to compare.

How to choose

Start with the mounting. A sound bench takes the Alba or a Jada, and a wall that can be reinforced takes the Blanca or the Valentina. Then choose the shape for the space: round for the compact bench, pill for the narrow one, the shelf basin for a wall with room for it. Choose the colour knowing it will vary, then choose the tap, because there is no hole, and the waste to match.

Last, plan the care before the basin is fitted: mild soapy water and a soft cloth, no abrasive pads, no bleach or acetone, and no hot tools on the surface. That order puts the easy decisions first and the ones that are hard to undo, the wall work and the plumbing, last.

Frequently Asked Questions

How do I know which basin mixer is right for my basin type?

The key factor is the height and style of your basin. For standard inset or semi-recessed basins, a regular deck-mounted basin mixer with a spout height of around 100–140mm works well. However, if you have an above-counter or vessel basin, where the bowl sits on top of the benchtop, you will need a tall basin mixer with a spout height of 180mm or more, otherwise the spout will sit below the basin rim and water will splash onto the benchtop. Wall-mounted mixers offer another option for above-counter basins, with the height controlled by your rough-in position. Always confirm basin rim height before purchasing your tapware.

What is an above counter basin?

An above counter basin (also called an above bench or vessel basin) sits on top of the vanity benchtop rather than being inset into it. The full exterior of the basin is visible, making it a strong design statement. Above counter basins are available in ceramic, stone, concrete, and composite materials in a range of shapes, round, oval, rectangular, and sculpted forms.

What is an inset basin?

An inset basin (also called a top-mount or drop-in basin) drops into a pre-cut hole in the benchtop, with the rim of the basin sitting on top of the benchtop surface. This is one of the most common basin installation types in Australian bathrooms and suits a wide range of vanity styles. Inset basins are practical, secure, and easy to replace without changing the benchtop.

What is a wall hung basin?

A wall hung basin is fixed directly to the wall with no vanity cabinet below, it is cantilevered off the wall with the waste pipe running up the wall or through the wall behind. Wall hung basins give a bathroom a very open, spacious feel and are popular in powder rooms, compact ensuites, and contemporary minimalist bathrooms.

What is an undercounter basin?

An undercounter basin (also called undermount basin) is installed below the benchtop surface, with the benchtop material cut to the basin opening and the basin bonded underneath. This creates a seamless, flush benchtop with no rim or lip, water and mess can be wiped directly from the benchtop surface into the basin.

What is a semi-recessed basin?

A semi-recessed basin sits partially into the benchtop (or vanity top), with the front portion of the basin protruding beyond the front edge of the cabinet. This allows for a shallower vanity cabinet (often 350 – 400mm deep instead of the standard 450 – 550mm) while still providing a practical basin size. Semi-recessed basins are ideal for narrow bathrooms where depth is at a premium.

What size basin waste do I need?

Most Australian basins require a 32mm or 40mm diameter basin waste. The basin manufacturer's specifications will confirm the correct size. Ensure the thread size (typically 1¼" or 1½") matches your trap and waste pipe connection. Always check the waste specifications of your basin before ordering.