Skip to content

Ceramic Bathroom Basins

0 Items

Whoops, there are none available in your area

View all products

Ceramic basins buying guide


Ceramic is the material most basins here are made from. This page holds ceramic basins from Caroma, ADP, Timberline, Turner Hastings, Clark, Eight Quarters, Otti and Bao, in every mounting type, in vitreous china and fine fire clay, in gloss and matte finishes. The guide below covers what ceramic is, why the names overlap, what it asks of the vanity or the wall, how to care for it, and what to check on the basin you choose.

What a ceramic basin is

A ceramic basin is shaped from clay, glazed and fired in a kiln. Clay and water are poured into a mould, dried, glazed and fired at about 1200 degrees Celsius. The glaze is what you wash in: it gives the smooth, sealed surface that makes ceramic easy to wipe clean. Caroma basins have a smooth, stain-resistant surface, and Turner Hastings basins have a non-porous, stain and scratch resistant glaze.

Ceramic, porcelain, vitreous china and fine fire clay

The four names overlap. Porcelain is clay fired at very high temperatures, which makes it less dense and less porous, and vitreous china is a glassy enamel coating on a clay body that gives a high gloss. In practice the brands use their own words. Caroma uses vitreous china and fine fire clay, and fine fire clay basins are much more resistant to impact. Turner Hastings uses double glazed fine fireclay for durability and impact resistance, and Fienza has a fully vitrified ceramic. So a search for a porcelain basin finds the same ceramic family, and the material of a given basin tells you which clay and glaze it is.

The drawbacks, stated plainly

Ceramic has two real drawbacks, and both come from the same hard, heavy fired material. It is heavy, so the benchtop must support it or get extra support, and a wall hung ceramic basin needs the wall prepared. Wall hung basins need fixing to a support beam between the studs, with noggins added before the wall is sheeted. And a hard impact can chip or crack it. The usual cause is a dropped heavy object, and repairing a chip is time-consuming. A scratch in glazed ceramic cannot be repaired or removed. None of this is a reason to avoid ceramic, since it is the material most basins here use, but it does argue for care with heavy objects and for a solid fixing.

Care

Wipe ceramic with a soft cloth and a weak non-abrasive detergent, and dry spills. Soapy water on a sponge or microfibre cloth is enough for daily care. Avoid abrasive cleaners and scourers, because they scratch the glaze and a scratch cannot be repaired. Some visual distortion in handcrafted fired ceramic is not a defect, so a slight variation in a handmade shape is normal. Rinse the bowl and rim after each use and wipe the area around the tap, because that is where hard water marks form first.

Care in detail

The routine for vitreous china is easy to follow. For day-to-day care, water and a damp cloth are all you need. For water marks, grease and soap scum, use a proprietary bathroom cleaner of the supermarket liquid type. For limescale, household vinegar can be used, and for a stubborn stain cover the mark with kitchen paper soaked in vinegar and leave it for 30 minutes. Be careful with substances containing fluoride, such as rust removers and toothpaste, and remove deposits straight away because they can stain if left. For stains that remain, use a cream bathroom cleaner, though cream cleaners can dull the ceramic if overused, so test a spot that is not highly visible first.

A greener method takes five steps. Put the plug in. Sprinkle bicarbonate of soda around the basin, mostly on the limescale and greasy marks. Pour on a little white vinegar and let it fizz. Work the mixture into the surface gently with a clean sponge. Rinse with cold water, and wash all the residue away so the rubber seals in the waste are not damaged. Two warnings apply. Do not use harsh chemicals of the bleach type, because they destroy the chrome on overflow caps and damage the rubber seals in the wastes. And never mix different cleaning products, because the reaction can be dangerous.

Bleach, abrasives and scouring powders are the aggressive agents to avoid for continuous use. Dark marks left by metal can usually be removed with a sanitary eraser. Do not polish scratches with toothpaste, because the fluoride caution above applies. Check the care sheet for your basin before you try anything beyond soap and water.

If a basin chips or cracks

A chipped basin can be repaired with an epoxy putty to rebuild missing depth and then a colour-matched compound for the glazed surface. Remove soap film and loose material, dry the damage completely, rebuild the missing area with putty, then apply the colour match in thin layers, since a thick coat builds up and spoils the finish. Deal with any active leak, movement or spreading through-crack first so the repair has a firm, dry base, and never repair an unsupported basin before fixing the support. A hairline crack in the glaze alone does not usually leak because the body underneath is intact, but a crack that runs through the basin compromises it and means the basin should be replaced.

Matching the glaze colour is the hard part of any repair. See matte white basins and black basins for the coloured finishes.

Ceramic basins by type

Every mounting type is available in ceramic. Above counter basins sit on the bench, inset basins drop into a cut-out, semi-recessed basins project past a shallow cabinet and undermount basins fit beneath a solid benchtop. Wall hung basins fix to the wall and freestanding basins stand on the floor. The tap hole line decides the tapware: a basin with no tap hole takes a bench or wall mixer, one tap hole takes a basin mixer on the bowl, and three take a three-piece set. See bathroom basins for how the types compare.

Plug, waste and overflow

Most ceramic basins here are non-overflow only, and some have an overflow. Caroma basins include a plug and waste, either a flush fitting chrome waste or a matching ceramic pop-up. ADP, Otti, Bao and several other basins are sold with the plug and waste separate, so check before you add fittings. A ceramic basin's waste is tightened by hand only, with a foam washer under the waste neck sealed with neutral cure silicone, because over-tightening stresses the basin. See basin wastes.

Sizes and shapes

Ceramic basins range from compact hand basins to long wall hung basins. The Caroma Luna hand wall basin is 450mm long, the Liano II round above counter basin is 400mm across, the Liano II pill is 530mm by 350mm and the Caroma Tribute rectangle wall basin with a shelf is 600mm. The Otti Oxford fluted round basin is 395mm across and the ADP Jennifer is a 360mm round. See small hand basins for the compact sizes, and the shape pages for round, oval and rectangular basins.

Finishes

White in gloss and matte is the base of the range. Ceramic glazes also come in matte white, black, green and grey, and the Caroma range adds matte clay, matte pink and matte speckled. Choose the basin colour before the tapware finish, so the metal and the glaze can be matched or deliberately contrasted.

Fitting a ceramic basin: the order of work

A ceramic basin goes in last, after the bench or the wall is ready. Confirm the cut-out, the tap hole position and the support before the basin comes out of the box. Fit the tap and the waste to the basin where the type allows it, set the basin on a thin bead of neutral cure silicone and tighten the waste by hand only. Connect the supply to isolation valves, fit the trap, and run a final bead of silicone where the basin meets the wall or the bench. After the silicone has cured, open the valves slowly and fill and empty the basin several times while you watch every joint. Keep the cartons and the installation sheet until the job is signed off, and lift the basin by the body, not the rim.

Ceramic or another material

If you want a uniform, glazed surface, ceramic is the more consistent choice. If you want a textured surface that varies from basin to basin, see concrete basins, and for cast and cut alternatives see stone basins and solid surface basins. Concrete, stone and solid surface follow their own care rules, which those pages set out. The difference shows in cleaning. Vinegar and citric acid should not be used on mineral cast basins, while vinegar is the routine limescale cleaner for ceramic. A cleaner that is routine on one material can damage another, so check the material line before you reach for the vinegar.

Brands on this page

Browse Caroma basins, ADP basins, Timberline basins, Turner Hastings basins and Clark basins for the full ranges.

How to choose

  1. Decide the mounting type from the vanity or the wall.
  2. Check the benchtop or the wall can carry the weight, and plan a support beam for a wall hung basin.
  3. Read the material line to see whether it is vitreous china, fine fire clay or double glazed fireclay.
  4. Read the tap hole, overflow and plug and waste lines.
  5. Plan the care: a soft cloth, a weak non-abrasive detergent and no scourers.
  6. Read the product weight line, and plan the bench support or the wall beam for it, because the weight is the dry weight of the basin alone.
  7. Check the glaze and rim for chips before the basin is fitted, since a chip is hard to repair once the basin is in place.
  8. Book a licensed plumber for the water connections, and check the plumbing positions against the product before it is fixed.
  9. Keep a copy of the installation sheet with the receipt for future reference.

For the cabinet that carries the basin, see bathroom vanities.

Frequently Asked Questions

Are ceramic basins any good?

Yes, ceramic (vitreous china) is the standard, proven basin material in Australian bathrooms for good reason. It's non-porous once fired and glazed, resistant to staining, easy to keep clean with a normal non-abrasive cleaner, and doesn't need periodic sealing the way a concrete basin does. Its main limitation is that it's rigid and can chip or crack under a hard, sharp impact, which is a fair trade-off against how low-maintenance it is day to day.

Which is better, porcelain or ceramic?

For basins, the terms are largely interchangeable in everyday use. Vitreous china, the material almost all Australian basins are made from, is a dense, fully vitrified type of ceramic, and it's sometimes marketed as porcelain since the two share the same fired-clay-and-glaze process. There isn't a meaningful practical difference between a basin described as "ceramic" and one described as "porcelain" from a mainstream supplier, both perform the same way.

How much does a ceramic basin cost?

Ceramic basins generally sit at the more affordable end compared with stone, solid-surface or handmade concrete basins, since the manufacturing process is more established and produced at greater scale. Price within ceramic itself is driven mainly by size, shape complexity and brand rather than the material cost, a large sculpted above-counter ceramic basin will cost more than a simple compact inset basin. Comparing like-for-like size and mounting type is more useful than a single expected figure.

Can a ceramic basin be repaired if it chips or cracks?

Small surface chips can sometimes be filled and touched up with a specialist ceramic repair kit, though the result is rarely completely invisible, particularly on a glossy glaze where colour and sheen need to match exactly. A structural crack through the basin body isn't something that can be reliably repaired, since the integrity of the bowl is compromised, and replacement is the safer option at that point. Avoiding dropped hard objects onto the basin is the main practical prevention.

How does a ceramic basin compare with a stone, concrete or composite basin?

Ceramic is lighter, generally more affordable and needs no sealing, which makes it the lower- maintenance, more budget-friendly default. Stone and composite basins bring a different look and can be more resistant to chipping, while concrete basins offer a raw, textured finish but need periodic resealing and are considerably heavier. The right choice comes down to the look you want and how much upkeep you're willing to take on, not one material being objectively superior.

Do ceramic basins come in different finishes, or just gloss white?

Ceramic basins are made in a range of finishes beyond standard gloss white, including matte glazes and a growing range of colours. See matte white basins if a softer, non-reflective surface is what you're after, the material underneath is the same ceramic body either way, only the glaze finish differs.