Stone basins buying guide
This page currently holds three Turner Hastings Fino basins: a 550mm under counter basin, a 550mm counter top basin and a 382mm above counter basin. They are ceramic, not stone. They are double glazed fine fireclay made to suit a stone, marble or timber benchtop, and the Fino basins are the ones to choose if you want a ceramic basin on a stone bench. If you want a basin made of stone, the guide below sets out what stone asks for in sealing and care, and where to find stone composite, concrete and solid surface basins on the site.
The Fino basins on this page
The Turner Hastings Fino under counter basin is 550mm long and 410mm wide, 188mm high overall, with an 11 litre bowl and 120mm of depth to the overflow. It suits any style of bathroom with a stone or marble benchtop, and the overflow is included as standard. The Fino counter top basin is 550mm by 380mm and 115mm high, with a 9 litre bowl and 92mm of depth to the overflow. The Fino 382mm above counter basin is 369mm by 369mm and 115mm high, with a 10 litre bowl, a thin rim and an organic design for a custom vanity with a stone, marble or timber top.
All three are double glazed fine fireclay, which is durable and impact resistant, with a non-porous, stain and scratch resistant glaze. They come in gloss white and in matte options. None has a tap hole, so the mixer mounts on the bench or the wall. The under counter and counter top basins take a 32mm waste with overflow and the above counter basin takes a 32mm waste, and the plug and waste are sold separately, so add one to the order. See basin wastes and basin mixers.
Putting an under counter basin in a stone benchtop
The under counter Fino sits beneath the bench. An undermount basin suits a solid benchtop such as stone, engineered stone or solid timber that can be cut and sealed at the edge, and it is generally not recommended for laminate. The benchtop fabricator cuts the opening, so choose the basin before the top is made. The undermount basins page covers the fitting and the trade-offs, and above counter basins cover the basins that sit on top.
Is a stone basin a good choice
A natural stone basin is unique, since no two stones are alike, and it looks more natural and textured than glazed ceramic. Stone is generally more robust against a hard impact, while ceramic is glossy and uniform, resistant to stains and not needing a sealer, though it can chip or crack if a heavy object is dropped on it. The cost of stone's character is upkeep. Natural stone is porous, and the porosity is controlled with a sealer, so a stone basin needs sealing and regular care. If you like the idea of stone but want an easier routine, stone composite is the middle path.
Caring for a stone basin
The care rules are plain. Wash with a mild detergent at least once a week and dry with a soft cloth, and avoid harsh scrubbers and abrasive products, which can scratch the surface. Marble is prone to etching from acidic cleaners, so be cautious with vinegar and baking soda on marble, and use a pH-neutral cleaner on marble and onyx. Onyx is more delicate than other stones and needs careful maintenance, while marble needs regular upkeep to prevent staining. Stone finishes are polished, which is sleek and shiny, or honed, which is matte and rustic. For the ceramic Fino, wipe with a soft cloth and a weak non-abrasive detergent, dry spills, and remember that a scratch in glazed ceramic cannot be repaired.
Stone composite, concrete and solid surface
Many basins sold as stone are stone composite, quartz or solid surface, and their care is simpler: a soft cloth with pH-neutral detergent, avoiding abrasives and bleach. Here, the Kaskade stone basins are stone composite, and some ADP basins are stone composite in colours such as Royal Beige; see ADP basins. Terrazzo is a composite of stone chips, glass or resin, and a sealed version resists stains. Concrete basins and terrazzo have a textured surface and need their own care, solid surface basins are cast as one material, and ceramic basins cover the glazed alternative. The green basins page includes stone finishes in green.
Sealing a natural stone basin
Natural stone basins are sealed, and the seal wears. Many arrive pre-sealed from the factory, and reseal at least once a year with a water-repellent sealer made for the stone. Limestone and travertine are the most porous and need attention more often, marble sits in the middle, and granite is less porous than marble, limestone and quartzite, so it generally needs resealing less often.
The test is better than the calendar. Put a few drops of water on the stone and wait five minutes. If the water beads, the seal is working, and if it soaks in and darkens the stone, it is time to reseal. For an expensive stone, use the longer test: a puddle about 75mm across left for 30 minutes, then look for a dark ring. Sealing also needs to happen before first use, so ask us whether the basin arrives sealed.
Fitting an under counter ceramic basin to a stone bench
The Fino under counter basin sits beneath a stone bench, and the bench fabricator cuts the opening, so choose the basin before the top is made. The reveal, where the stone overlaps the basin rim from underneath, is typically about 3 to 5mm, and a wider reveal shows a gap from above while a tighter one removes the bonding surface. Most fabricators will not cut undermount openings in stone under 20mm thick, and 30mm is the usual standard, so ask your fabricator what thickness it needs. Use 100 percent neutral cure silicone, because acetoxy types release acetic acid that etches marble and limestone.
For a Turner Hastings under counter basin, cut the opening to allow a 5mm overhang and use an approved flexible watertight adhesive, and not epoxy or any other solid adhesive. A flexible adhesive rules out the rigid glues. Follow the sheet in the box, and have the fabricator and the plumber agree the sequence, because the basin is fixed to the underside of the stone before the top goes onto the cabinet. See undermount basins.
For stone composite basins that sit on a bench, see Kaskade stone basins.
Tapware and heights for the Fino basins on a stone bench
None of the Fino basins has a tap hole, so the mixer mounts on the bench or the wall, and a stone bench has to be drilled for it. Settle the tap position before the fabricator cuts the stone, because a hole drilled later is a costly retrofit on stone, concrete or timber tops. An above counter basin pairs with a tall basin mixer and an under counter or semi-recessed basin with a short one. For the 382mm above counter Fino, a tall mixer or a wall mixer keeps the spout above the rim. The spout should clear the rim by about 100mm to 150mm and the reach should match the distance from the tap fixing to the centre of the drain. For reference, two tall mixers on the store list a spout height of 216mm with a reach of 170mm, and 244mm with a reach of 180mm. See basin mixers.
Height adds up differently by type. The Fino above counter basin is 115mm high and sits on the stone, while the under counter basin sits below it and the counter top basin is 115mm high on top. Floor-mounted vanities run at 850mm to 900mm and wall-hung vanities at 800mm to 900mm, with a depth of 460mm to 550mm. Accessible design puts the rim at 800mm to 830mm. For an above counter Fino, take the basin height, add it to the bench height and compare the total with the rim you want.
Choosing between the three Fino basins
The three differ in how they sit and what they hold. The under counter basin at 550mm by 410mm holds 11 litres and includes an overflow, and it suits any style of bathroom with a stone or marble benchtop. The counter top basin at 550mm by 380mm holds 9 litres with 92mm of depth to the overflow. The 382mm above counter basin at 369mm by 369mm holds 10 litres, with a thin rim and an organic design for a custom vanity with a stone, marble or timber top. A capacity can be measured to the rim or to the overflow, and two of the three Fino basins have a depth to the overflow, so compare like with like.
If the stone is the feature, an under counter basin keeps the bench unbroken and lets the stone run to the edge of the bowl, but it needs a fabricator to cut and polish the opening. If the basin is the feature, the above counter basin sits on the stone and needs no cut-out. See above counter basins and ceramic basins.
Brands on this page
The Fino basins are from Turner Hastings; see Turner Hastings basins for the range.
How to choose
- Decide if you want a stone basin or a ceramic basin made for a stone bench.
- For natural stone, plan for sealing and regular care, and use only pH-neutral or mild cleaners.
- For an under counter basin, check the benchtop can be cut and sealed, and choose the basin before the top is made.
- Check the tap hole, overflow and plug and waste, because they differ between basins.
- Check the length, width and height against the bench.
The bathroom basins page sets stone beside the other materials, and bathroom vanities covers the cabinets that carry the bench.