Skip to content

Small Bathroom Hand Basins

0 Items

Whoops, there are none available in your area

View all products

Small hand basins buying guide


A small hand basin is a compact basin for a toilet, an ensuite or a narrow bench, where a full-size basin would not fit or would crowd the room. This page holds small hand basins from Caroma, ADP, Bao and Clark: mostly wall hung hand basins, with small above counter, under counter and inset basins, in ceramic, fine fire clay and solid surface. The guide below covers what counts as small, the sizes, which type suits a tight room, and the tap hole, depth and waste lines to read.

What counts as a small basin

There is no standard size for a small basin, so read the dimensions on each product. The smallest above counter basins here are the ADP Maggie at 300mm by 300mm and 110mm high with a 4 litre bowl, and the Bao Classic at 310mm by 310mm and 155mm high with a 4 litre bowl. The ADP Pluto is 325mm across and 130mm high with a 5.5 litre bowl. The ADP Selma is 400mm by 280mm and the ADP Patty is 450mm by 280mm, both 110mm high and sold as ensuite basins. For a toilet or a narrow powder room, a wall hung hand basin is the smallest option. For powder room basins on a bench, see small basins.

Small bench basins compared

The small above counter basins from ADP differ in footprint and bowl size, so line them up before you choose. The Maggie is 300mm by 300mm and 110mm high with a 4 litre bowl. The Pluto is 325mm across and 130mm high with a 5.5 litre bowl. The Selma is 400mm by 280mm and 110mm high with an 8.5 litre bowl, and the Patty is 450mm by 280mm and 110mm high with an 8 litre bowl. The Bao Classic is 310mm by 310mm and 155mm high with a 4 litre bowl. The plug and waste is sold separately on all of them.

See counter top basins for more bench shapes. Pick the Maggie or the Bao Classic for the smallest bench footprint, the Pluto for a round bowl with a little more depth, and the Selma or the Patty when a hand basin is also the main basin of an ensuite and you want a bowl that holds more water. Above counter basins sit on top of the bench, so the rim sits higher than a wall hung basin. Allow for that when you choose the tap.

Inset and under counter small basins

Some small basins sit in or under the bench. The ADP Faith is a solid surface rectangle, 495mm by 255mm with a 4 litre bowl, and it sits 45mm above the benchtop with a short projection that suits ensuite vanities. The ADP Hope is a solid surface under counter basin, 495mm by 255mm and 120mm high, with a 4 litre bowl, no tap hole and a plug and waste sold separately that must be a waste without overflow. The ADP Bo is a rectangular under counter basin, 430mm by 265mm, with an overflow.

An under counter basin leaves a clean bench edge that wipes down in one pass, which suits a small room where the bench is the only work surface. It needs a stone, solid surface or other top that can be cut to take it, so choose the top and the basin together. The Hope and the Bo have no hole for a tap in the bowl, so the mixer mounts on the bench or the wall.

Which type suits a small room

Wall hung and bench mounted forms suit toilets, bathrooms and powder rooms. A wall hung basin keeps the floor open, needs no vanity and gives more room to reach the basin and the mirror. Basins that do not rely on a vanity keep the floor accessible and leave fewer crevices to clean. If the room needs a cabinet, a small vanity carries a small above counter, under counter or inset basin, and the semi-recessed basin keeps a full-size bowl on a shallow cabinet.

Wall hung hand basins

The wall hung hand basins differ in depth, which matters in a tight room. The ADP Halo is 450mm wide, 100mm high and has a 160mm projection, with a 1 litre bowl, and it is contoured to clear swinging doors when space is minimal. The ADP Eon is 450mm wide with a 150mm projection. The Caroma Luna hand wall basin is 450mm long with a 3 litre bowl, and the Urbane II hand wall basin is 460mm long with a 5.9 litre bowl. The Caroma Liano II hand wall basin is 530mm long, 280mm wide and 130mm high with a 2.7 litre bowl. The Clark Square hand wall basin has a 3 litre bowl to the overflow and comes with a fixing kit. See wall hung basins for how the wall is prepared.

ADP Halo and ADP Eon compared

The ADP Halo and the ADP Eon are both wall hung, both 450mm wide and both 100mm high, and they differ in projection and bowl. The Halo projects 160mm and holds 1 litre, with an inner bowl depth of 80mm. It is solid surface with one tap hole, and it does not include a plug and waste or wall fixings. The Halo is contoured to clear a swinging door when space is minimal.

The Eon projects 150mm and weighs 4.5kg. It is a reversible solid surface basin with an overflow, with a chrome overflow supplied, a right hand tap hole only and a raised rim that helps keep water in the bowl. It needs a 32mm waste with overflow, and the wall fixings are not included. ADP pairs it with the Waterloo bottle trap. Both basins need solid backing in the wall, even though they are light.

Tap holes and tapware

Most wall hung hand basins here have one tap hole for a basin mixer, including the Liano II, Luna, Urbane II, Clark and Halo. The small above counter basins have no tap hole, so the mixer mounts on the bench or the wall. A small bench basin pairs with wall mounted spouts and mixers, and some solid surface small wall hung basins come without pre-drilled holes. Read the tap hole line, then choose basin mixers or bathroom basin taps to suit.

Caroma wall hung hand basins compared

Caroma makes three of the hand wall basins here, in gloss white and in colour. The Luna is 450mm long with a 3 litre bowl and one tap hole, and it comes with a white plug and a chrome flush fitting waste. The Urbane II is 460mm long with a 5.9 litre bowl, a thin rim and one tap hole, and it includes an integrated ceramic pop-up plug and waste that sits flush when open. The Urbane II waste is also available in Chrome, Matte Black, PVD Brushed Nickel, PVD Brushed Brass and PVD Gunmetal, and a version with an integrated towel rail is available in finishes to match your tapware.

The Liano II comes in the widest range of colours. It is 530mm long, 280mm wide and 130mm high as a basin, with one tap hole. Choose the Liano II when the colour is part of the design, the Luna for a softly curved powder room, and the Urbane II when you want a larger bowl and a thin rim. The Urbane II and the Liano II with an overflow carry a 20 year warranty.

Caring for the solid surface hand basins

The ADP Halo, Eon, Hope and Faith are solid surface, a different material from the ceramic Caroma and Bao hand basins. Solid surface is a durable mix of 100 percent acrylic resins, non-porous, with better stain resistance than natural stone and no need for sealing or treating. A scratched surface is very easy to repair. Clean with warm soapy water on a soft cloth, and avoid metal scourers, abrasive products and harsh cleaners. The maximum water temperature is 65 degrees Celsius, which matters for a hand basin fed by a hot tap.

The method for repairing a scratch depends on the finishing system, so check the care sheet before sanding anything. Solid surface is not cold to the touch the way natural stone is, and its pattern may vary like natural stone. For the ceramic hand basins, wipe with a soft cloth and a weak non-abrasive detergent, dry spills, and avoid abrasive pads that mark the glaze. So the two materials suit different care routines. See solid surface basins and ceramic basins.

Which small basin suits which job

  • A toilet or a cloakroom with no bench: a wall hung hand basin such as the ADP Halo, the Caroma Luna or the Caroma Liano II.
  • A powder room with a small vanity: a small above counter basin such as the ADP Maggie, the ADP Pluto or the Bao Classic.
  • An ensuite vanity with a shallow cabinet: a basin with a short projection such as the ADP Faith or the ADP Selma.
  • A bench that must stay easy to wipe: an under counter basin such as the ADP Hope or the ADP Bo.
  • A room where colour is the feature: the Caroma Liano II in matte green, matte pink, matte speckled or another finish.

Pair a hand basin with a toilet from the same range for a matched look. See toilets for the full range, and bathroom accessories for a towel rail or hook near the basin.

Brands on this page

Browse Caroma basins, ADP basins, Clark basins and Bao basins for the full ranges, and assisted living basins for basins made for accessible bathrooms.

How to choose

  1. Measure the width and the depth available, including the door swing.
  2. Choose wall hung if the floor must stay open, or a small above counter or under counter basin if there is a bench.
  3. Read the projection or depth, and check the plumbing fittings fit.
  4. Read the tap hole line and plan the mixer.
  5. Read the overflow and plug and waste lines on each product page, because they differ between basins.

The bathroom basins page sets small hand basins beside the other types.

Frequently Asked Questions

What is a wall hung basin?

A wall hung basin is fixed directly to the wall with no vanity cabinet below, it is cantilevered off the wall with the waste pipe running up the wall or through the wall behind. Wall hung basins give a bathroom a very open, spacious feel and are popular in powder rooms, compact ensuites, and contemporary minimalist bathrooms.

Do wall hung basins need special wall support?

Yes. Wall hung basins must be fixed to a structural wall or a wall frame with appropriate backing boards or a concealed support bracket system rated for the load. Tiled bathroom walls are not inherently strong enough to support a wall hung basin without the correct backing. This should be planned and installed by a licensed plumber before the wall is tiled.

What is the correct height for a wall hung basin?

The standard height for a wall hung basin in Australia is typically 850mm from the finished floor level to the top of the rim. This can be adjusted to suit the users, for children's bathrooms, a lower height may be preferable, while taller users may prefer 900mm. The adjustability is one of the advantages of wall hung basins over fixed vanity-mounted options.

What counts as a small basin?

There's no single official cutoff, but basins marketed as "small" or "compact" in Australia generally run from around 350mm up to 500mm wide, compared with a standard full-size basin closer to 550 to 600mm. They're built for spaces where a standard basin simply won't fit, powder rooms, ensuites, laundries, or a narrow vanity top, rather than being a lower-quality version of a full-size basin.

What's the smallest hand basin size available?

The smallest basins on the market typically sit around 300mm to 350mm wide, often paired with a narrow or corner-specific design to make the most of very limited wall or bench space. Below that width, usable bowl depth starts to become the limiting factor rather than the footprint, so it's worth checking a basin's actual bowl dimensions, not just its overall width, before assuming it will be comfortable to use.

What's the best type of small basin for a tight bathroom?

It depends on the space more than any one basin being universally best. A wall hung basin frees up floor space entirely, since there's no vanity cabinet underneath, which suits a very tight powder room. A countertop or inset basin sitting on a narrow vanity keeps some storage underneath, which suits a small ensuite where you still want a drawer or cupboard. Corner basins are worth considering in an awkward-shaped room where a straight wall run isn't available.

How much bench or wall space do I actually need for a small basin?

Beyond the basin's own footprint, allow clear space either side for elbow room and a place to set down toiletries, plus enough depth for the tap and any splashback. As a rough guide, even a compact 300 to 400mm basin generally needs a wall or bench run of around 450 to 500mm once tap clearance and a small margin either side are factored in, not just the bare width of the bowl.