Skip to content

Lockwood 001 Double Cylinder Deadlatch with Open In Strike

0 Items

Whoops, there are none available in your area

View all products

Lockwood 001 double cylinder deadlatch buying guide


The Lockwood 001 double cylinder deadlatch is an entrance lock for a front or back door, sold with a knob or a lever and an open in strike. It has a cut-resistant stainless steel bolt, 11 concealed anchorage points and a door frame strengthener, and it is made in high purity zinc alloy in everbrass, brown, chrome plate, satin chrome plate, satin chrome pearl and matte black. This guide explains what a deadlatch is, how the double cylinder and the bolt holdback work, what the security features mean, the sizes that decide fit, how to choose between the knob and the lever, and how to plan, fit and care for the lock. The brand overview is on Lockwood, and the Lockwood deadbolts are on Lockwood deadbolts.

What a deadlatch is

A deadlatch is a lock that locks its own bolt when the door closes. A plain latch can be pushed back with a card or a screwdriver, because the bolt is held only by a spring. A deadlatch has a small plunger beside the bolt that rests against the strike when the door is closed, and that plunger blocks the bolt from being pushed back. The door is therefore locked against slipping as soon as it shuts, without the key being turned. The key still locks and unlocks the door from outside, and the knob or lever works the bolt from inside.

It differs from a deadbolt, which is a solid bolt that moves only with a key or a thumb turn and does not retract when a handle is pressed. A deadlatch is quicker to use because the door locks as you close it, and a deadbolt gives a stronger bolt that must be thrown by hand. Many front doors carry both. See deadbolts and entry door lock sets.

Double cylinder: what it means

A double cylinder lock takes a key on both sides. From outside the key locks and unlocks the door, and from inside the knob or lever works the bolt, with the key used to lock the bolt in position. A double cylinder suits a door with glass beside it, since a person who breaks the glass cannot reach a thumb turn to open the lock. The trade-off is that a key is needed to leave when the door is locked, so keep a key where the household can find it and an intruder cannot reach it through glass or a letterbox. Some areas limit double cylinders for fire safety, so check local rules.

The 001 includes the SafetyRelease feature, which minimises the risk of being locked in. Use it as part of a plan: know where the key is, and make sure every adult in the house knows how to leave.

The security features

The 001 is built around a set of features that each do a job.

The bolt is stainless steel and cut resistant, so it resists being sawn through. It has 11 concealed anchorage points, which means the lock is fixed to the door at many hidden points so it is hard to prise off. A door frame strengthener, a screw that goes through the frame into the structure, reinforces the strike so the frame is harder to split. The case is high purity zinc alloy. Kinetic Defence is the name for the bump and pick resistance, a mechanism that makes the cylinder harder to open with a bump key or a pick.

The lock conforms to the Australian standard for mechanical locksets, AS 4145.2-2008, at SL 7 D8 C6, and it is supplied individually keyed with two keys per lock. A lock is only as strong as the door and the frame around it, so check them as well. Press on the door near the lock, and look at the frame: a hollow door or a thin, split frame will fail long before the bolt does.

The bolt holdback

The bolt holdback is a function that holds the bolt retracted so the door does not latch. It is activated by the external key or the internal knob, and it can be key locked in the holdback position from inside. It is useful when you want the door to open freely for a period, such as during a party, while work is under way, or when people are coming and going, without leaving the door locked or needing to turn the key each time. When the holdback is released, the bolt returns and the door latches again.

Use the holdback with care. A door left in holdback is not locked, so release it before you leave the house or go to bed.

Open in strike

The strike is the plate on the door frame that receives the bolt. An open in strike is a strike with an open back, so the bolt enters the frame through the plate and not through a closed box. It is made for a door that opens inward, and it is paired with a frame strengthening screw that goes through the frame for extra strength. Check the swing of the door before you order: this strike suits a door that opens into the house. A door that opens outward needs a different arrangement, so check with the product before you order.

Knob or lever

The 001 comes with a knob or a lever. A knob is the traditional form, compact and neat, and it needs a grip and a twist. A lever works with a push of the hand or the elbow, and needs no grip, so it suits people with limited hand strength and anyone carrying something. The knob is about 100mm across the face and the lever about 140mm long, and both sit on a 73mm wide plate. The choice is partly about the look of the door and partly about who uses it. On a front door used with full hands, the lever is easier.

Sizes that decide fit

The 001 suits doors 30 to 45mm thick, with a 60mm backset. The three numbers to check before you order are the door thickness, the backset and the position of the existing lock. Measure the door edge with a tape, and measure from the edge to the centre of the existing spindle hole. If the door is thinner than 30mm or thicker than 45mm, the lock does not suit it. The lock is 73mm wide, so check that the door stile is wide enough to carry it, and check that the lock does not clash with a glass panel or a decorative moulding.

The lock is a surface fixing with a mortice latch bolt, so it needs the holes drilled through the door and the edge prepared for the bolt. A joiner or a locksmith is the safe choice for a door that is already hung.

Finishes

The 001 is made in everbrass, brown, chrome plate, satin chrome plate, satin chrome pearl and matte black. Everbrass is a warm, classic brass tone and brown is a deep, dark colour that suits traditional doors. Chrome plate is bright and reflective. Satin chrome plate and satin chrome pearl are soft, quiet silvers that hide fingerprints and suit stainless steel. Matte black is neutral and gives a strong contrast on a pale door. Not every finish is made in both the knob and the lever, so check the product.

Choose the finish to match the other metal on the door: the handle, the hinges, the house number and the letterbox. Keep one finish across them where you can. See matte black, brass and brushed nickel for the wider choice in those tones.

What is in the box

The box contains the internal and external hardware, the strike, the fixings, the instructions and two keys. Check the contents against the product before you start, and keep the packaging until the lock is fitted and working. The keys are individually keyed, so each lock has its own key, and extra keys can be cut from them. If you want one key to open more than one lock, ask about keying alike when you order, since keying cannot easily be changed after the lock is fitted.

Fitting the lock

Mark the position of the lock on the door, drill the large hole through the face and the smaller hole for the bolt in the edge, and cut the edge recess for the bolt face. Fit the lock body and the cylinder, check that the bolt throws freely, and fit the handle on each side. Fit the strike to the frame, marking its position by closing the door with the bolt extended, and chisel the recess to the depth of the plate. Fit the frame strengthening screw through the strike into the structure. Test the lock from both sides, with the door open and closed, before you leave the job.

Checking the door and frame

A lock secures only as much as the door and frame allow, so check both before you order. Press firmly on the door near the lock and look for flex. A hollow core door gives easily, and a solid timber or solid core door does not. Look at the frame beside the strike: a thin or split frame, or a frame fixed to the wall with a few short screws, will fail under force. Check that the hinges are fixed with long screws that reach the structure, and that the gap between the door and the frame is even and small, since a wide gap gives a lever a place to start. If the door or the frame is weak, strengthen it before you rely on the lock.

Hinges and the hinge side

The hinge side of a door is as important as the lock side. On an inward opening door the hinge pins are inside, so they are hard to reach, and on an outward opening door the pins are outside and can be tapped out unless the hinge has a fixed pin or a security stud. Use hinges with fixed pins on an external door. Fit three hinges on a full height door, and use screws long enough to reach the frame structure. See hinges for fixed pin hinges.

Frequently Asked Questions

What is a door handle set and what does it include?

A door handle set (also called a door lever set or door furniture set) typically includes the lever handles for both sides of the door, a rose or backplate, a spindle to connect the handles, and fixing screws. Some sets also include a latch or lock mechanism. In Australia, door handles must comply with AS 4145 standards for security and durability. The Blue Space stocks door hardware from Zanda, Lockwood, and other trusted Australian brands.

What is the most popular door handle style in Australian homes?

Contemporary lever handles with a round or square rose are the most popular style in Australian homes currently. Matte black and brushed nickel are the dominant finishes in new and renovated homes. Traditional rounded lever handles in polished chrome or brushed nickel suit classic and Hamptons-style homes. Choosing a consistent handle style and finish throughout the home creates a cohesive, well-designed result.

What is the difference between a lever handle and a knob

A lever handle is operated by pressing down on an elongated arm, it is accessible for people with limited hand strength and is the most common door handle type in Australian homes. A door knob requires gripping and turning, which some users find less accessible. Under the Disability Discrimination Act, lever handles are recommended in accessible homes and are increasingly standard in new builds.

What is an entrance handle set?

An entrance handle set is a door handle set designed specifically for the front or entry door of a home. It includes a keyed cylinder lock integrated into the handle or separate lockset, providing external security. Entrance sets are available in a range of styles from contemporary to traditional and must be rated for external use, exposed to the elements, with weather-resistant finishes.

What is a dummy door handle?

A dummy handle is a non-functional door lever or knob that is decorative only, it does not operate a latch or lock. Dummy handles are used on doors that don't require a latch (such as double doors where one door is fixed, wardrobe doors that slide or swing without a latch, or decorative cabinet doors). They give the door the appearance of a complete handle set without the mechanical function.

What is a passage handle set?

A passage handle set includes two lever handles connected by a spindle that operate a latch, allowing the door to be opened from either side without a lock. Passage sets are used on internal doors where privacy is not required: hallways, living areas, home offices, and children's bedrooms. They are the most commonly used internal door handle set in Australian homes.

What is a privacy handle set and where is it used?

A privacy handle set includes a locking mechanism that can be engaged from inside the room, typically a simple push-button or turn-snib and can be unlocked from outside in an emergency using a small pin or coin. Privacy handles are used on bathroom, toilet, and bedroom doors where privacy is required but a keyed lock is not necessary.

What handle do I need for a sliding door?

Sliding doors require a specific type of handle, typically a recessed flush pull, a finger pull, or a surface-mounted sliding door pull. Because a sliding door doesn't have a hinge pivot point, standard lever handle sets don't apply. Flush pulls sit recessed in the door surface and are ideal for cavity (pocket) sliding doors. Edge pulls are mounted on the leading edge of the door for easy gripping.